Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Santa Clarita Owner’s Guide
We handle Unilock kitchen remodeling work in Santa Clarita, including matching and installing the components that make up a Unilock kitchen system when one piece fails and takes the rest with it. A full kitchen remodel here runs $14,000 – $45,000 installed; smaller kitchens land between $9,000 – $20,000, and a single failed component (a countertop section, an island, a backsplash run) can often be corrected for less. Most Santa Clarita owners don’t discover a problem with their Unilock kitchen until something obvious gives: a countertop seam that has opened up, a cabinet run pulling away from the wall, or a backsplash tile that popped loose after a hot summer. The system works as a unit, so when one part goes, the wear shows across the whole assembly.

Key Takeaways
- Unilock kitchen components are matched by series and measurement, not by eyeballing a photo.
- Santa Clarita’s dry heat and hard water put specific stress on seams, grout, and cabinet anchoring.
- Installed kitchen remodel pricing here runs $14,000 – $45,000, with written line-item quotes before work starts.
- We’re an independent service provider, not affiliated with Unilock.
Which Unilock Models This Apply To
Unilock’s kitchen-adjacent product lines are built around a series system, which is the first thing to understand before you order anything. A component from one series often won’t seat correctly into another series even when the two look identical in a photograph. That’s the compatibility trap we see most: an owner finds a replacement piece online, it arrives, and the thickness, edge profile, or mounting pattern is off by a few millimeters – enough that it won’t sit flush.
Identifying the right part comes down to three things: the series name (usually stamped on the back of a component or printed on the original spec sheet if you still have it), an actual measurement with a tape – length, width, and thickness to the millimeter – and the profile or edge style. If there’s no label left, measure it and photograph the failed piece from three angles. We’ll match it from there.
On the OEM-versus-aftermarket question for Unilock specifically: OEM replacements carry the exact spec but cost more and sometimes run weeks out. A quality aftermarket equivalent can match the spec at lower cost, but only if the thickness and profile are verified, not guessed. We quote both and tell you plainly which holds up better for a Santa Clarita kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Countertop seams opening up. Santa Clarita’s dry summers cause wood and composite substrates to shrink and swell; a seam that was tight in spring can open a visible gap by August. Left alone, moisture gets in and the seam keeps widening.
- Cabinet runs pulling away from the wall. This usually traces to anchors that worked loose or weren’t set into studs originally. In older Santa Clarita homes, it’s often both.
- Backsplash tiles popping loose. Adhesive failure, usually from heat cycling – the wall behind a range gets hot in summer and cool at night, and thin-set that was already marginal lets go. A tile you can push with your thumb is a tile that’s coming off.
- Grout cracking along the countertop-to-backsplash joint. That joint moves with the house. Rigid grout cracks; a flexible sealant flexes. If you’re re-grouting the same joint every year, the joint itself is the problem.
- A sagging or rocking island. An island carries weight and gets leaned on. Legs or base cabinets that shift mean the fastening or the floor leveling was never right – and it gets worse with use.
The pattern behind most of these: a component was installed against a substrate or wall condition that changed after install. Fixing the visible symptom without addressing the cause means you’ll be fixing it again.
Replacement Cost & What’s Included
Installed pricing for Unilock kitchen remodeling in Santa Clarita depends on which component failed and how much has to come out to reach it. Here’s how the ranges break down for the work we do:
| Work | Installed Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range on a parts-driven job: whether adjacent components have to be removed to reach the failed one, whether the substrate behind it is sound, and whether the replacement spec matches what’s there or requires adjustment. Parts and labor are quoted separately and in writing. Every change order is written before work proceeds, and the job is backed by our written 90-Day Done Right Promise – if it isn’t right, one call brings Tom back. We also install KraftMaid, Cambria, and Silestone when a repair turns into an upgrade. Estimates are free, and a second opinion on any written estimate you already have costs nothing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely look: photograph the failed piece, measure it, and check whether the cabinets or countertop are structurally sound behind it. That information helps us quote faster, and it costs you nothing to gather it.
Where DIY goes wrong on these jobs: the substrate. A countertop or cabinet that’s pulling away is telling you something behind it failed, and bolting a new piece to a bad substrate just postpones the same problem a year. Grout and sealant failures also almost always trace to movement, and re-grouting a moving joint is a losing battle. If you’re working around an electrical outlet, gas range, or water line, call us – those aren’t places to learn by trying.
Call (833) 762-8116 and we’ll get you a written range before anyone touches the kitchen.
FAQs
A properly installed Unilock kitchen component should hold up 15 to 20 years in Santa Clarita conditions, though the dry heat and hard water here accelerate wear on seams and grout joints faster than in coastal climates. If you’re getting 20 years out of a countertop seam or tile joint without attention, you’re ahead of the curve. Call (833) 762-8116 for an honest read on yours – estimates are free.
Sometimes yes, and it’s worth checking before you spend on a swap. A cabinet that’s pulled loose or a seam that’s opened can often be re-secured and re-sealed if the substrate is sound. A component with a cracked substrate or structural damage usually can’t. We’ll tell you which one you’re looking at before quoting anything.
A single-component swap – a backsplash run, an island, a countertop section – usually runs one to three days once the part is matched and in hand. A full Unilock kitchen remodel takes several weeks, depending on scope and permit timeline. We pull permits and get inspections signed on every eligible job, so that timeline is part of the quote.
We source by series and measurement, not by photo. You provide the label or the tape measurements and photos, and we match against OEM and verified aftermarket equivalents, then quote both so you can decide. We don’t carry parts on a truck – each replacement is matched to your specific model. Call (833) 762-8116 to start the match.
Get Your Unilock Kitchen Question Answered Today
If a piece of your Unilock kitchen has failed or is heading that way, the fastest path is a real conversation and a written range. We’re an independent service provider, not affiliated with Unilock, and we’ve been doing this kind of work in Santa Clarita for a long time as an owner-operated company – Tom Barrett’s name, address, and license number are published, so you can look them up before you sign anything. Calls are answered by a live person 24/7. Free second opinion on any written estimate, no trip charge inside the county, and the standing 10% Senior & Veteran discount all apply. Call (833) 762-8116 for a free estimate.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.