Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Santa Clarita Owner’s Guide
We install, replace and repair Unilock-compatible windows and doors across Santa Clarita, and the honest answer on cost is this: window replacement runs $4,500 to $15,000 for a typical home, and impact-rated windows run $8,000 to $25,000 depending on count and glass package. We don’t stock parts and we don’t carry inventory, so timing depends on the part and the lead time on the unit – call us and we’ll tell you straight what your Unilock product needs and when we can get it.

Owners usually find this out the hard way. A bedroom window that won’t latch in August. A slider that drags hard enough that your wife stops using it. A patio door that fogs between the panes after a wet winter. By the time someone calls us, they’ve usually already tried the hardware store and figured out the part isn’t on the shelf.
Which Unilock Models This Applies To
Unilock has made windows and doors in several configurations over the years, and the part that fits one series will not fit another. The panels look similar from the driveway. They’re not. The differences live in the hardware, the frame extrusion and the glass package, and that’s where most of the frustration starts.
Before you order anything, we ask three things. First, find the manufacturer label – it’s usually on the inside of the sash, in the head jamb of the frame, or etched into the corner of the glass. That label carries the model line and a date code, and it’s the single most useful thing you can send us. Second, measure the visible glass and the frame opening, not just the rough opening. Third, note whether the unit is single-hung, double-hung, casement, slider or a hinged/folding door. Those three pieces of information narrow the part down to a handful of options.
On the OEM-versus-aftermarket question, here’s our take. For closers, handles, locks, rollers, weatherstrip and screens, a good aftermarket equivalent is usually fine and often half the price. For glass units and full sash replacements, we lean toward OEM or an equivalent unit built to the same spec, because the frame profile has to match. We are an independent service provider and are not affiliated with Unilock – we source parts by matching your label and measurements to what’s available, and we tell you up front whether we’re quoting OEM or an equivalent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
These are the five things we see most in Santa Clarita homes, and what’s actually going on underneath:
- Fogging or condensation between the panes. That’s a failed seal in the insulated glass unit. The glass itself isn’t broken – the seal that keeps the argon in and the moisture out has given up, and no amount of wiping the inside will fix it.
- The window won’t latch or lock. Usually a shifted sash, a worn lock mechanism, or a frame that’s moved slightly with the season. It’s a security issue as much as a convenience one, and it’s worth fixing sooner rather than later.
- The slider or patio door drags. Rollers wear out, tracks fill with grit, or the door has settled out of square. Often it’s the roller – a part that’s cheap to replace and miserable to live with when it’s shot.
- Drafts and whistling along the frame. Weatherstrip flattens and pulls away over time. Santa Clarita’s summer heat bakes it and the winter wind finds every gap.
- Water staining or soft wood at the sill. This one gets serious. It means water is getting behind the unit, and the trim or framing around it needs a look before it spreads into the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window replacement in Santa Clarita typically lands between $4,500 and $15,000 for a whole-home job. Impact window installation – worth talking about given how the wind and fire seasons have gone around here – runs $8,000 to $25,000. For a single failed glass unit, a hardware swap or a door roller replacement, the number is much smaller and we’d rather quote it in person than guess on the phone.
What drives the range: how many openings, whether you’re doing full-frame or insert replacement, the glass package, and whether the surrounding trim and framing are sound. Every job gets a written line-item quote before we start, and if anything changes mid-job you get a written change order before the work moves forward – not an invoice at the end.
The work is backed by our 90-Day Done Right Promise, written on the contract. If it’s not right, Tom comes back and makes it right.
DIY or Call Us?
You can safely check a few things yourself. Look for the manufacturer label and write down the model and date code. Test each lock and latch by hand. Clean the door tracks and see if the drag improves. Look at the glass for fogging and the sill for staining. That’s all information we need and none of it will hurt you.
Where it goes wrong is the replacement itself. Glass units are heavy and fragile, sashes have to be re-hung and squared correctly, and a door that’s re-hung out of square will drag worse than before. Sill rot is the one that catches people – it looks like trim until you open it up and find the framing behind it is wet. That’s a job for someone who knows what they’re looking at.
Call (833) 762-8116 and we’ll schedule a free estimate. A live person answers, day or night.
FAQs
Plan on 15 to 25 years for the unit itself, with hardware and weatherstrip wearing out sooner – often in the 8 to 15 year range. The heat here is the main culprit: sustained summer temperatures dry out seals and flatten weatherstrip faster than in cooler climates. Call (833) 762-8116 for an exact read on your units – estimates are free.
Often, yes. A fogged glass unit, a worn lock, a dragging roller or tired weatherstrip can all be replaced without pulling the whole window. Full replacement makes sense when the frame is damaged, the sill has rot behind it, or the unit is past its useful life. We’ll tell you which one you’re in. Call (833) 762-8116 to set up an estimate.
Most hardware and weatherstrip swaps are a half-day job. A glass unit replacement is usually a day, and that’s mostly wait time on the part. Full window replacement is a multi-day project depending on count. We’ll give you the timeline in writing before we start. Call (833) 762-8116 for a free estimate.
We match your unit’s label and measurements to the part, then tell you whether we’re quoting OEM or an equivalent. We don’t stock parts and we’re not affiliated with Unilock, so we source each one to fit your specific model and date code. That’s the honest process – no guessing from a photo. Call (833) 762-8116 to get started.
Barrett & Sons Construction has been serving Santa Clarita homeowners since 1998, and we also handle KraftMaid, Cambria and Silestone work in kitchens and baths. If you’ve got a Unilock window that won’t latch or a door that won’t slide, call (833) 762-8116 for a free estimate. No trip charge inside the county, and a live person answers 24/7.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.