Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Home Additions & ADU: The Santa Clarita Owner’s Guide
We build and install Unilock-compatible home additions and ADUs in Santa Clarita, and most projects land between $45,000 and $130,000 installed, depending on size and finish level. A standalone ADU runs $90,000 to $220,000; a garage conversion sits lower, at $30,000 to $80,000. This is planned construction, not emergency work, so we schedule it properly rather than promising it done in a day.

Owners usually discover trouble in one of two ways. Either the addition was finished by someone else and a part has since failed (a door that won’t seal, a threshold that’s pulling up, a finish piece that’s cracked), or they’re mid-plan and realize the spec sheet doesn’t match what’s actually available. Either way, you’re here because a specific piece needs to be matched, priced, and installed correctly.
One thing up front: we’re an independent contractor, not affiliated with Unilock. We work with their materials because they hold up, and we’ll tell you plainly what fits and what doesn’t.
Key Takeaways
- Installed cost for a Unilock-compatible addition in Santa Clarita: $45,000 – $130,000. ADUs: $90,000 – $220,000.
- Match the part to your actual Unilock series before you order anything. Measurements on the box rarely match what’s on the wall.
- Exterior threshold and finish pieces are the first to go in Santa Clarita’s swing between dry summers and wet winters.
- Every price change on our jobs arrives as a written change order before work moves.
Which Unilock Models This Applies To
Unilock’s exterior and hardscape lines show up most often on the parts of an addition or ADU that take weather: thresholds, step nosings, sills, and the finished exterior edge where the addition meets the yard. If you’re matching a piece, start by identifying the series rather than the part. Look for a stamp, a score mark, or a label on the back face of the unit; if the label’s gone, measure the face length and thickness and compare against the current series dimensions. Dimensions shift slightly between production lines, and a piece that “should” fit often doesn’t once a series has been revised.
On the OEM-vs-aftermarket question, here’s the honest split. For a visible finish piece, an exact-match OEM unit is usually worth it: the color and texture have to line up, and a near-match reads as a patch from twenty feet away. For a hidden structural or bedding component, a quality equivalent that meets the same spec will do the job, and you’ll pay less for it. We’ll tell you which category your part is in before you spend a dollar.
We also handle KraftMaid, Cambria, and Silestone on the interior side of additions, so if your project ties cabinetry and counters into the same build, it’s one written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Home Additions & ADU Is Failing
- A threshold that rocks or lifts. Usually bedding that’s settled or water getting under the edge. In Santa Clarita’s clay-heavy ground, movement after a wet winter is common.
- Hairline cracks in a finish unit. Often a sign the base wasn’t compacted before the piece went down. The crack is the symptom; the soft base is the cause.
- Efflorescence (white chalky film) that keeps returning. Moisture wicking through the unit. It can be surface residue, or it can mean water is getting behind the assembly.
- A step nosing that’s chipped or worn proud. Foot traffic wears the leading edge first, and a chipped nosing is a trip point for anyone older walking that step.
- A joint that’s opened or a piece that’s spalled on the face. Freeze-thaw and sun cycling working on a piece that was already compromised.
If you’re seeing two or more of these, the repair is rarely just one piece. We’d rather look at the assembly than sell you a part that fails again next season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For the full addition or ADU project this part belongs to, Santa Clarita pricing runs as follows:
| Scope | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, whether the foundation needs engineering, how much site work is involved, and the finish level you choose. Also whether the addition ties into an existing roofline (more framing, more waterproofing) or stands on its own.
On parts-and-labor, we price them separately and show you both. Material cost for a single replacement unit is a small slice of the total; the labor to remove, prep the base, set, and finish is the larger part, and the number is honest rather than padded.
Every completed job is backed by our written 90-Day Done Right Promise. If it’s not done right, Tom comes back and makes it right, one call.
DIY or Call Us?
There’s a real line here, and it’s worth knowing which side you’re on. You can safely check a few things yourself: whether a threshold rocks underfoot, whether efflorescence returns after you clean it, whether a crack has widened over a season. Take photos with a tape measure in frame, and that’s genuinely useful information for us.
Where DIY goes wrong: bedding and base prep. A finish unit set on a soft or poorly compacted base will fail again, usually within a season. Getting the base right is the whole job, and it’s not something you learn from a video. We’re not going to walk you through setting a structural piece and then have it move under your family’s feet.
Call us at (833) 762-8116 or schedule a free estimate. If you already have a written quote from someone else, we’ll give you a free second opinion on it.
FAQs
Properly bedded and compacted, you should expect 25 to 50 years out of a good unit. The variable isn’t the material; it’s the base under it. Santa Clarita’s clay soils and wet winters are the real test, and a piece set on a soft base fails years before the material itself gives out.
If yours has failed early, call (833) 762-8116 and we’ll look at why before recommending anything.
Sometimes, yes. A single rocking threshold can often be reset if the unit is intact and the base can be re-compacted. A spalled or cracked finish piece usually can’t be saved, since the failure runs through the material.
We’ll tell you honestly which side of that line you’re on. Call (833) 762-8116 for a free estimate so you’re not guessing.
A single-piece replacement is typically a short job once the correct part is on site: prep, set, and let it cure. If the failure goes deeper (base rework, drainage correction), it can run into a multi-day project. We schedule it realistically and don’t oversell speed.
Call (833) 762-8116 to get a timeline for your specific situation.
We match against your series, verify dimensions against the current production spec, and order the exact unit, not a close guess. We don’t stock parts or carry them on a truck, so the source depends on your series and lead time.
Call (833) 762-8116 and we’ll tell you what’s realistic for your model.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.