A Barrett company - serving Santa Clarita, CA

Tremron Bathroom Remodeling in Santa Clarita, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Bathroom Remodeling: The Santa Clarita Owner’s Guide

Tremron-compatible bathroom remodeling in Santa Clarita typically runs $9,000 – $28,000 installed, and we schedule free estimates within a few days. Smaller bathrooms land closer to $5,000 – $12,000. When a Tremron bathroom is failing, most owners notice it the same way: a shower wall tile that sounds hollow when they knock on it, a grout line by the curb that keeps cracking, or a floor paver that moves a hair underfoot near the toilet.

Professional contractor applying mortar to kitchen backsplash during home remodeling project in Santa Clarita, CA

Call (833) 762-8116

Tremron makes hard surfaces – porcelain and ceramic tile, pavers, and trim pieces that show up in a lot of Santa Clarita bathrooms built or updated in the 1990s through the 2010s. We’re an independent contractor and not affiliated with Tremron, but we’ve set and reset enough of their product to know what fails, why, and what it costs to fix it right.

Key takeaways:

  • Full Tremron bathroom remodel: $9,000 – $28,000 installed in Santa Clarita
  • Single shower replacement or tub-to-shower change: $3,000 – $12,000
  • Permits pulled and inspections signed on every eligible job
  • Written change orders on every scope or price change, before work moves

Which Tremron Models This Applies To

Tremron doesn’t sell a single “bathroom model” – they sell tile and paver product lines, and the compatibility question is really about matching the right replacement piece to the existing install. The most common floor and wall lines we run into in Santa Clarita bathrooms are the 12×12 and 13×13 porcelain tiles, 6×6 wall tiles, and the matching bullnose trim. If your floor or curb uses a paver-profile piece, it’s often a 60mm or 80mm thickness, and getting the thickness wrong is the number one thing that throws off a shower curb height.

How to identify what you’ve got:

  • Look on the back of a loose tile or the edge of the box for the imprinted series name and size
  • Measure the actual thickness with a caliper or a good ruler – “looks like 60mm” isn’t a spec
  • Match the dye lot if you’re only replacing a few pieces; colors shift between runs

On OEM versus aftermarket: Tremron-pattern tiles from a second source are usually fine for a patch job, but on a full shower surround the color match on a discontinued series is hard. We tell people to pull the trigger on a full replacement when more than a handful of pieces are involved.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Bathroom Remodeling Is Failing

Here’s what actually goes wrong, and what’s really happening underneath:

  • Hollow knock on a wall or floor tile. The thin-set bond has let go, usually from moisture intrusion behind the tile or a floor that flexed under a bad subfloor. The tile itself isn’t the problem – the bond is.
  • Cracks along grout lines, especially at a curb or wall joint. Movement in the substrate. Grout is brittle by design; when it cracks repeatedly, the structure underneath is moving.
  • Tiles lifting or popping near the toilet or vanity. Water pooling from a slow leak or a failed wax ring softening the subfloor. By the time a tile pops, the wood below is often already compromised.
  • Efflorescence – the white chalky crust on grout or tile edges. Salt coming through from moisture behind the tile. Common in Santa Clarita because our summers are hot and dry and winters swing wet, which pushes moisture in and out of exterior walls.
  • Lippage – one tile edge sitting higher than its neighbor. A sign the substrate wasn’t flat when it was set, or that a piece has started to debond. Either way it’s a trip point in a wet room.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the numbers actually look like in Santa Clarita, installed, with parts and labor together:

Job Installed range
Full bathroom remodel (Tremron tile/paver surfaces) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Shower replacement $3,000 – $8,500
Tub-to-shower conversion $3,500 – $10,000
Walk-in shower installation $4,500 – $12,000
Vanity installation $800 – $3,000

What moves the range: square footage, whether the pan and drain need to be reset, whether the subfloor is sound or has to come up, and the tile series you pick. A discontinued Tremron series might cost more to match than a current one.

What’s included: demolition, prep and waterproofing, tile setting, grout, sealing, cleanup. Our quotes are line-item and written, with no surprise invoices at the end – an allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets permits pulled and inspections signed, and every finished job is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can safely check yourself. Others will ruin your weekend and your subfloor.

Safe to do on your own: tap-testing tiles for hollow spots, checking the caulk line at the shower base, looking under the vanity for water stains, measuring tile thickness with a caliper, and pulling the series name from the back of a loose piece.

Where DIY goes wrong: resetting a shower pan or re-waterproofing behind tile. A failed shower pan is the source of most of the rot we find on these jobs, and a homeowner re-caulking over one just traps the water in. Subfloor repair around a toilet is the other one – the leak is almost always deeper than the surface damage suggests.

If you’ve got hollow tiles, repeated cracking, or a soft spot near the shower, call us at (833) 762-8116 for a free estimate. We’ll tell you straight whether it’s a patch or a reset.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch