A Barrett company - serving Santa Clarita, CA

Dvele Kitchen Remodeling in Santa Clarita, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Kitchen Remodeling: The Santa Clarita Owner’s Guide

Kitchen remodeling for a Dvele home in Santa Clarita typically runs $14,000 – $45,000 installed, and we install Dvele-compatible cabinetry, counters, and fixture packages throughout the Santa Clarita Valley. Scheduling a walkthrough usually takes a few days, and every eligible job gets permitted and inspected. Dvele builds factory-panelized homes, so most owners discover the kitchen needs work the same way: a cabinet door that won’t stay closed, a laminate counter seam lifting near the sink, or a drawer box that sags a half-inch because the original hardware was built for a lighter load. The kitchen is the first room to show wear in a Dvele, and it’s usually the hardware and the counter edges that go first, not the frame.

Professional contractor applying mortar to kitchen backsplash during home remodeling project in Santa Clarita, CA

Call (833) 762-8116

Key Takeaways

  • Dvele-compatible kitchen remodels in Santa Clarita run $14,000 – $45,000 installed.
  • Cabinet panels and counter cutouts are the parts most likely to need replacement first.
  • We’re an independent contractor, not affiliated with Dvele, and we source to your model’s specs.
  • Permits pulled, written change orders, and the 90-Day Done Right Promise on every job.

Which Dvele Models This Applies To

Dvele builds a few home lines, and the kitchen cabinet and counter dimensions differ between them. The fastest way to sort out what fits your kitchen is to find the data plate inside the home – usually in the garage, on the electrical panel door, or on a label inside a base cabinet – and match the model line and build year to the kitchen package that home shipped with. From there, a tape measure tells you more than a spec sheet: Dvele base cabinets often run 34½ inches tall rather than the 34½ – 36 inch range you’ll see on stock store cabinets, and the toe-kick depth is set to the panelized wall, not to a standard stick-built kitchen. That half-inch matters when you’re sliding in a replacement box.

Matching the part is where most owners go wrong. Dvele’s cabinet doors and drawer fronts are cut to the panel layout, so an off-the-shelf door from a hardware store won’t line up without a filler strip or a new hinge bore. On counters, the cutout for the sink and the cooktop is set by the template that came with that build. The OEM-vs-aftermarket decision comes down to what’s failed. If it’s a hinge or a drawer slide, a quality aftermarket part from a name brand is often stronger than what shipped. If it’s a cabinet box, a counter slab, or a panel that ties into the wall system, you want the Dvele-correct dimensions or a custom cut, because a mismatch here shows up on every cabinet line in the room. The brands we install – KraftMaid, Cambria, and Silestone among them – can be matched to your Dvele layout, and every material is one you can look up and price yourself before we ever start.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Kitchen Remodeling Is Failing

  • Cabinet doors that drag or won’t stay shut. The hinge plate on a Dvele panel cabinet is screwed into thinner material than a stick-built box, and the screws wallow out over time. Once that happens, the door sags and the hinge won’t hold adjustment.
  • Drawer boxes that sag under a full load. The original undermount slides are often rated for a lighter weight than a full pot drawer carries, and the bottom of the box bows. You’ll feel it catch before you see it.
  • A lifting seam where the laminate counter meets the sink or the backsplash. In Santa Clarita’s dry summers and cooler winters, the wood substrate under a laminate counter swells and shrinks, and the seam lifts. That’s usually the first sign the counter is giving out.
  • Water staining under the sink. A slow leak from the faucet base or the disposal flange soaks the cabinet floor before you notice it. By the time the stain shows, the cabinet bottom panel needs replacing, not just drying.
  • Counter cracks at the cooktop cutout. Heat cycling around a cooktop cutout stresses the edge of the slab or the laminate, and a hairline crack at the corner is where a full replacement starts. Patch it and it comes back within a season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Small kitchen remodels in Santa Clarita run $9,000 – $20,000, and a full Dvele kitchen remodel runs $14,000 – $45,000 installed. Breaking it down by part: cabinet installation is $4,000 – $13,000, countertop installation is $2,000 – $6,500, backsplash installation is $800 – $2,500, and a kitchen island installation is $3,000 – $10,000. What drives the range is how much of the cabinet box gets replaced versus how much hardware gets swapped, which counter material you choose, and whether the job needs a permit for any plumbing or electrical relocation. Every quote is line-item: parts on one line, labor on the next, allowances spelled out. An allowance that isn’t on paper is a surprise waiting for a date, so we put it in writing before work starts. Every price change during the job arrives as a written change order first. The work is covered by the 90-Day Done Right Promise.

DIY or Call Us?

A homeowner can safely tighten a loose hinge, swap a drawer slide for a matching one, and re-caulk the sink seam. That’s the line. What goes wrong past it is the counter and the cabinet box: weighing and cutting a laminate or stone counter around the sink cutout is a two-person job that needs the right blade and a template, and a bad cut means a new slab. Pulling a cabinet box out of a Dvele panel wall without knowing where the fasteners run can open a hole in the wall behind it. And if the job moves any plumbing or wiring, that’s permit territory, not weekend territory. Our technicians have up to 28 years of experience with these jobs. The permit inspector works for you, not for us, and that’s why we want him on the job. If you’re past the hinge-and-caulk stage, call (833) 762-8116 for a free estimate and we’ll tell you straight whether it’s a swap or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch