Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Driveway & Pavers: The Santa Clarita Owner’s Guide
If you’re pricing a James Hardie driveway or paver project in Santa Clarita, plan on roughly $7,000 – $18,000 installed for a paver driveway, and $3,500 – $11,000 for a paver patio, with the final number set by square footage, base prep, and border detailing. Concrete and asphalt alternatives run lower, but most owners who call us about a failed surface have already learned why. We’re an independent contractor, not affiliated with James Hardie, and we install to the manufacturer’s written specs. The failure usually shows up the same way: a low spot holding water near the garage apron, joints opening a quarter inch after a hot August, or pavers rocking underfoot on the slope side of the drive.

Which James Hardie Models This Applies To
James Hardie’s exterior line is best known for siding, trim, and panels, so it’s a fair question whether a driveway or paver surface is even a James Hardie product. In practice, when a Santa Clarita homeowner says “James Hardie pavers,” they’re usually describing a hardscape project spec’d to match James Hardie siding and trim colors already on the house, or a surface that was originally installed as part of a James Hardie exterior system. That distinction matters at quote time: we match paver color and texture to your existing James Hardie color line, not to a fictional model number.
To identify what you actually have, look in three places. First, the original build or remodel paperwork: hardscape spec sheets list paver manufacturer, series, and color. Second, a corner edge or a paver pulled up near the driveway apron: most quality pavers are stamped on the underside. Third, the joint sand color and paver dimensions (common formats are 60mm and 80mm thickness; driveway-rated pavers should be 60mm minimum, 80mm on slopes). If you can’t find a match, we can spec a close alternative and show you samples side by side before anything is ordered.
OEM vs. aftermarket here isn’t a parts question, it’s a base-and-material question. On Santa Clarita’s shrink-swell clay soils, the base prep and joint sand matter more than any brand stamp on the paver. We source from established manufacturers and write the exact product, series, and color into the contract so there’s no swap at delivery.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. That’s almost always base failure, not the paver itself. On Santa Clarita’s clay, a base that wasn’t compacted in lifts or wasn’t deep enough will move within a season or two of the first heavy rain.
- Joint sand washing out. Polymeric sand blows out when the joint width is inconsistent or the sand was installed wet. Refilling every spring is a sign the original install cut corners, not a maintenance issue.
- Efflorescence (white haze) that keeps returning. Some haze is normal curing. Haze that comes back after every wet winter in Santa Clarita points to moisture wicking up through a base with no drainage path.
- Low spots holding water near the garage apron. Water pooling within a foot of the garage door is a grade problem. Left alone, it works under the slab edge and into the garage, and it’s the single most common reason we get called back to a failed driveway.
- Cracked or chipped paver edges at the driveway entrance. Vehicle loads on a paver that wasn’t set on a proper edge restraint will chip and spall. If edges are cracking along the street cut, the restraint was likely omitted or undersized.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Every number below is installed, not parts-only, and covers tear-out, base prep, compaction, and finish. Santa Clarita pricing runs:
| Project | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, slope (a steep Santa Clarita drive needs deeper base and more edge restraint), whether old concrete or asphalt has to be hauled out, and border or soldier-course detailing. Parts and labor are quoted as separate line items. Any change in scope starts with a written change order, signed before work moves. Every job that qualifies gets permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
A homeowner can safely check three things: whether joints are consistently filled, whether water pools near the garage, and whether any paver rocks underfoot. That’s diagnosis, not repair. Where DIY goes wrong is base work. Pulling up pavers and re-setting them on the existing base looks easy and fails fast on Santa Clarita’s clay, because the problem is below the surface, not in the pavers. Tear-out and re-base also means hauling several tons of material, and a driveway dug up for a weekend project is a driveway that may sit torn up for a month.
If your surface is moving, holding water, or washing sand out every spring, the base is the issue, and the base is where the money goes. Call (833) 762-8116 and we’ll walk the drive with you, tell you honestly whether a repair will hold, and give you a written estimate. Estimates are free.
FAQs
A properly installed paver driveway should hold up 25 years or more, but that lifespan lives or dies on the base. Santa Clarita’s clay soils expand and contract with our wet winters and dry summers, so a base that wasn’t compacted in lifts or wasn’t deep enough will fail within a few years regardless of paver quality. Call (833) 762-8116 for a free estimate and we’ll tell you whether your base is the problem.
Sometimes, yes. If the failure is limited to a small section (a low spot at the apron, a few rocking pavers, blown-out joint sand), we can often lift, re-base, and re-set just that area. If pavers are shifting across the whole drive, a spot repair won’t hold. We’ll tell you which one you’re looking at, in writing, before you spend a dollar.
Most residential paver driveways in Santa Clarita take three to five working days from tear-out to final compaction, weather permitting. Larger drives on steep slopes, or jobs that need a permit inspection before base work, run longer. We schedule the work and tell you the timeline up front, not the morning we show up.
We specify the exact manufacturer, series, and color in your contract, then order direct from the supplier. You get the product name in writing and can look it up yourself before we order. If a supplier substitution becomes necessary for any reason, it comes to you as a written change order first.
We also work with KraftMaid, Cambria, and Silestone on interior projects, so if the driveway project turns into a whole-house conversation, we can handle it under one roof.
Barrett & Sons is owner-operated, founded in 1998, and every price change arrives in writing before a nail moves. Our technicians have up to 28 years of experience. Whether it’s a full paver driveway or a failing section you want diagnosed honestly, call (833) 762-8116 for a free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.