Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose Toto Construction
Barrett & Sons Construction provides independent Toto construction and repair service throughout Santa Clarita, CA – from fill-valve swaps on a Drake to a full bathroom remodel built around an Ultramax II or an S550e Washlet. What sets our Toto work apart is model-level familiarity: we know the CST743 and CST744 fill assemblies, the Ultramax II flush tower, the Aquia dual-flush cartridge, and the hard-water reality of this valley. We’re an independent Toto service provider, not affiliated with or authorized by Toto. Call (833) 762-8116 and a live person answers, day or night.

Why Trust Barrett & Sons Construction Santa Clarita for Your Toto Construction?
Our crew members have worked on Toto fixtures for years, and our technicians bring up to 28 years of experience across plumbing, tile, and full bathroom builds. That matters with Toto because these fixtures reward the right parts and punish shortcuts. A generic big-box flapper in a Drake will ghost-flush and run. A non-OEM flush tower in an Ultramax II won’t seat right and you’ll hear water trickling at midnight.
We source OEM Toto components for the critical internals – fill valves, flush towers, flappers – so the toilet performs the way it was engineered to. On non-proprietary parts like supply lines, wax rings, and flanges, we use quality aftermarket suppliers to keep your cost sensible. Everything we touch is warranty-safe: we don’t drill, cut, or modify a Toto fixture in ways that would void coverage, and every scope change lands in a written change order before we pick up a tool. Every eligible bathroom job gets permits pulled and inspections signed. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Santa Clarita
Santa Clarita’s water is hard, and the valley swings from bone-dry summers over 100°F to humid stretches. That cycle does specific things to Toto fixtures. Here’s what we actually see:
- Washlet control panel and heating failures (S550e, C100). Hard-water scaling clogs the inlet filter and the wand, and moisture working into the control board during Santa Clarita’s dry-then-humid swings is a common culprit when a Washlet stops heating or spraying. Often it’s a cleanable or replaceable filter; sometimes the board itself has failed.
- Drake fill valve and flapper wear (CST743, CST744). High-mineral water scales up the fill valve so it never shuts off cleanly, and the flapper seal hardens and warps – you get incomplete flushes and a toilet that runs long after you walk away. This is the single most common Toto service call in Santa Clarita.
- Ultramax II flush tower seal deterioration (MS604114CEFG). The flush tower gasket flattens over time, letting water seep between tank and bowl. You’ll hear a faint trickle and see the water line creep. Left alone, it wastes water and stains the bowl.
- Wax ring and flange misalignment on replacements. When a Toto goes into an older Santa Clarita home with a different rough-in, a mismatched flange or a squashed wax ring causes slow leaks at the base and sewer gas odors. Newhall’s older custom and mid-century stock runs into this most.
- Aquia dual-flush cartridge sticking (CST412MF). The dual-flush actuator cartridge wears and the half-flush stops engaging, or the button sticks down and the toilet runs continuously. Replacement cartridges fix it cleanly.
A typical scenario: a Toto Drake that runs constantly or won’t flush completely usually has a worn flapper or a fill valve scaled up from Santa Clarita’s hard water. A qualified local pro tests the flush volume, inspects the flapper seal, replaces the fill valve and flapper with OEM or high-quality aftermarket parts, and adjusts the water level. For a Washlet that won’t heat or spray, the issue is often a clogged inlet filter or a failed control board – the pro cleans or replaces the filter, tests the board, and recommends a new unit if the board is back-ordered or too costly.
Toto Parts & Our Repair-vs-Replace Approach
We don’t claim to stock Toto parts locally – nobody sensible does, given how many model variants exist. Instead we identify your exact model and serial, then order the right OEM fill valve, flush tower, or flapper for that fixture. For critical Toto components we stay OEM because the performance depends on it. For non-proprietary parts – supply lines, wax rings, closet bolts, flanges – quality aftermarket keeps the bill reasonable without sacrificing the seal.
Our repair-or-replace call is honest. If the porcelain is sound and the internals are serviceable, we repair. We recommend replacement only when the bowl or tank is cracked, the flange is beyond repair, or a Washlet’s electronics are genuinely irreparable and the board costs more than a new unit. You’ll get that recommendation in writing, with the numbers, before anything is ordered. Call (833) 762-8116 for a free estimate on any Toto service – the second opinion on an existing written estimate is free too.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model – Drake CST743/CST744, Ultramax II MS604114CEFG, Aquia CST412MF, or a Washlet like the S550e – and test the actual failure: flush volume, flapper seal, fill valve shutoff, flush-tower seepage, or Washlet filter and board.
- 2
Written scope and parts plan. You get the repair or install scope, the OEM-versus-aftermarket parts call, and the price in writing. Any change comes as a written change order before work moves.
- 3
Repair or install. OEM internals go in, the wax ring and flange are checked and corrected on replacements, and Washlet filters and connections are cleaned or replaced. Permits are pulled on eligible bathroom work.
- 4
Test and sign-off. We run multiple flush cycles, check for seepage at the tank-to-bowl joint and the base, verify Washlet heat and spray, and confirm the water level holds. Inspections are signed where required.
- 5
90-Day Done Right Promise. Every completed job is backed in writing. If something’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Santa Clarita
We service and install the Toto lines Santa Clarita homeowners actually own: the Drake (CST743 and CST744 series), the Ultramax II (MS604114CEFG), the Aquia dual-flush (CST412MF), and Washlet bidet seats including the S550e and C100. We handle fill valves, flappers, flush towers, dual-flush cartridges, wax rings, flanges, and Washlet filter and control-board service. And because a toilet is often the start of a bigger project, we fold that work into full bathroom remodeling, walk-in shower installation, and tub-to-shower conversion – with tile, waterproofing, and fixtures done to the same written standard.
We Also Service These Brands
Toto is one focus, not the whole picture. Barrett & Sons Construction Santa Clarita also works with KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures across baths and plumbing. If your project mixes brands – a Toto toilet beside a Kohler tub, Cambria counters over KraftMaid cabinets – you’re not bouncing between contractors. One crew, one written scope, one point of accountability.
FAQs – Toto Construction Service in Santa Clarita
Is Barrett & Sons Construction Santa Clarita authorized by Toto? No. We’re an independent Toto service provider and are not affiliated with or authorized by Toto. We work on Toto fixtures every week and use OEM parts where performance depends on it, but we don’t represent the manufacturer. Call (833) 762-8116 for a free estimate.
Do you use genuine Toto/OEM parts? Yes for critical internals. We use OEM Toto fill valves, flush towers, and flappers on Drake, Ultramax II, and Aquia fixtures because those parts drive performance, and quality aftermarket for non-proprietary items like wax rings and supply lines to keep costs sensible. Call (833) 762-8116 and we’ll confirm the parts for your exact model.
How long does Toto service take? Most single-fixture repairs – a fill valve and flapper on a Drake, a flush tower on an Ultramax II – are done in a single visit once the correct part is on hand. Washlet diagnostics and full bathroom remodels take longer and get a written schedule up front. Call (833) 762-8116 to talk through your job.
What Toto models/series do you cover? Drake (CST743/CST744), Ultramax II (MS604114CEFG), Aquia (CST412MF), and Washlet seats including the S550e and C100, plus general Toto toilet installation and repair. Call (833) 762-8116 with your model number and we’ll tell you what’s involved.
Will service void my Toto warranty? Proper service with OEM parts and no unauthorized modification won’t void your Toto warranty. We don’t cut or alter fixtures in ways that would. When in doubt, keep your receipts and model info – call (833) 762-8116 and we’ll walk you through it.
How much does Toto construction cost in Santa Clarita? Single-fixture Toto repairs are modest; remodel work scales with scope. Below are typical Santa Clarita ranges for the bathroom work we fold Toto installs into. Call (833) 762-8116 for an exact quote – estimates are free, and so is a second opinion on any written estimate you already have.
| Service | Typical Santa Clarita Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
Book Your Toto Service in Santa Clarita, CA
Whether it’s a running Drake, a Washlet that quit heating, or a full bathroom remodel built around your Toto fixtures, Barrett & Sons Construction Santa Clarita will diagnose it honestly, put the scope and parts in writing, and back the work with our 90-Day Done Right Promise. Call (833) 762-8116 for a free estimate.
Written by the team at Barrett & Sons Construction Santa Clarita.