Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose Delta Construction
We provide independent Delta construction, repair, and service in Santa Clarita for homeowners who want their faucets, shower valves, and fixtures handled by a crew that actually knows the product line. What makes our Delta work different is focus: we concentrate on Delta kitchen and bath fixtures, so we recognize the cartridge changes, trim-line differences, and Touch2O quirks that trip up general remodelers. We are an independent service provider, not affiliated with or authorized by Delta, and we source correct OEM or quality aftermarket parts for every job. Call (833) 762-8116 to schedule a free estimate.

Why Trust Barrett & Sons Construction Santa Clarita for Your Delta Construction?
Delta makes a genuinely good faucet and valve, but the brand has changed cartridges and trim compatibility enough over the years that knowing the catalog matters. Our technicians have up to 28 years of experience, and that includes plenty of hours spent with a Delta Monitor valve torn apart on a drop cloth, matching the old part to the right new one. We read the model number, not the finish, before we quote a repair.
We use OEM Delta cartridges and solenoid assemblies whenever they’re available, because a $30 cartridge that fits right beats a $12 one that weeps six months later. For cosmetic trim upgrades, a quality aftermarket piece is fine as long as it’s specified correctly. Every job gets a written scope, and any change comes as a written change order before anyone touches the valve. That’s the same standard we hold on a full kitchen or bath remodel, backed by our 90-Day Done Right Promise. If we repair your Delta shower valve and it’s not right, one call brings us back.
Tom Barrett publishes his name, address, and license number, and you can look them up before you sign anything. That’s how we’ve operated since 1998, owner-operated from day one, with Tom’s sons running the crews across Santa Clarita.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Santa Clarita
These are the Delta issues we see most often in Santa Clarita homes, and what’s usually behind each one:
- Monitor 14/13 Series valve cartridge wear. Temperature that won’t hold steady or a handle that fights you are classic symptoms of a worn cartridge in a Delta Monitor 14 or 13 Series valve. Hard water and years of cycling wear the internal seals, and the pressure-balance spool loses its footing. The fix is usually a fresh OEM cartridge, not a whole new valve.
- Touch2O solenoid or battery failure. A Delta Touch2O kitchen faucet that stops responding to touch, or runs continuously, is usually a dead battery in the solenoid or a solenoid that’s failed outright. It’s rarely the sensing board. We test the solenoid and battery cradle first before recommending anything bigger.
- Aerator and diverter buildup in Lahara and Addison faucets. Reduced flow from your Delta Lahara or Addison kitchen faucet is often just mineral scale in the aerator. In bath applications, a stiff diverter that won’t send water to the shower head points to buildup behind the spout. Both are quick, low-cost fixes when caught early.
- Shower trim finish corrosion. Twenty-year-old Delta trim in Santa Clarita’s dry, hot valley doesn’t fail from humidity so much as sun-baked bathrooms and cleaning products eating the finish. When the finish is gone and the escutcheon no longer seals, water gets behind the wall. That’s when a trim replacement earns its keep.
- O-ring leaks on older Delta valve bodies. A drip at the base of an older Delta shower valve is frequently an O-ring or seat issue, not a cracked rough-in. If the body is sound, we reseal it. If the rough-in is damaged, replacement is the better money.
Here’s a typical scenario. A Santa Clarita homeowner notices the Delta Monitor shower valve no longer holds temperature and the handle feels stiff. A qualified local pro isolates the valve, pulls the cartridge, and replaces it with the correct OEM part, flushing the lines before reassembly. If the valve body is corroded or the trim is dated, that pro may recommend upgrading to a new Delta trim kit with a compatible rough-in, tying the repair into a full shower refresh.
Delta Parts & Our Repair-vs-Replace Approach
We don’t claim to stock Delta parts locally. What we do is source correctly: OEM cartridges, solenoid assemblies, and trim kits ordered to the exact model you have, and quality aftermarket trims where a cosmetic upgrade makes sense and the specs line up. On parts, the trade-off is straight. OEM buys you fit, finish, and warranty-safe compatibility. Aftermarket can save money on a visible trim piece, but a cheap cartridge or solenoid is a false economy in a valve that’s already been opened once.
Repair is usually the right call on a Delta valve body unless the rough-in is damaged. A cartridge, an O-ring, or a solenoid is a fraction of the cost of tearing out a wall, and most Delta valves are built to take a rebuild. When the body is corroded or the trim is shot, replacement is more cost-effective and we’ll say so plainly. We’d rather tell you a $180 repair is the answer than sell you a valve you don’t need. Call (833) 762-8116 for a free estimate.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We identify the exact Delta model and series, then test the cartridge, solenoid, or O-rings to pinpoint the real cause instead of guessing from a symptom.
- 2
Repair or install. We match OEM parts to your valve and document the scope in writing before work starts. Anything that changes mid-job comes as a written change order first.
- 3
Test. We run hot and cold, check for leaks at the escutcheon and base, and confirm Touch2O response if it applies. Nothing gets buttoned up until it holds.
- 4
Warranty. Every completed job is covered by our written 90-Day Done Right Promise. If something’s off, one call brings us back to make it right.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Santa Clarita
We work across the Delta lines that show up most in Santa Clarita kitchens and baths. That includes Delta Monitor 14 and 13 Series shower valves, the Lahara and Addison faucet collections, and the Cassidy and Trinsic bath fixture lines. We also handle Delta Touch2O kitchen faucets and the solenoids and battery cradles that keep them working. When a repair turns into a remodel, we fold it into a full bathroom remodeling project, a walk-in shower and shower remodeling job, or a full kitchen remodeling project, so your Delta fixtures sit in a space built to match them.

We Also Service These Brands
Delta is our focus, but we work with other brands when the job calls for it. We handle KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures and bath products. That means you’re not stuck if your Delta kitchen remodel also involves a new Cambria island top, or if the bathroom has a Kohler tub alongside your Delta valve. One crew, one scope, one written price.
FAQs – Delta Construction Service in Santa Clarita
My Delta Monitor shower valve runs cold or scalds – can it be repaired or does the whole valve need replacing? It can almost always be repaired with a new OEM cartridge rather than a full valve replacement. The Monitor 14/13 Series valves are designed to be rebuilt, and a cartridge swap usually restores steady temperature. Only a damaged or corroded valve body points toward replacement. Call (833) 762-8116 for a free estimate.
The Touch2O faucet on my Delta kitchen sink stopped responding to touch – is that a DIY fix? Sometimes, but it depends on the cause. A dead battery in the solenoid is often a simple swap, but an unresponsive or always-on faucet can mean a failed solenoid that needs the right replacement part. We test the solenoid and battery cradle first, so you’re not guessing. Call (833) 762-8116 to schedule a free estimate.
Can I keep my existing Delta shower rough-in and just update the trim during a bathroom remodel? Yes, in most cases, if the rough-in is sound and you match trim to a compatible valve model. That’s often the smartest move during a walk-in shower or tub-to-shower conversion, since it saves the cost of tearing into the wall. We verify compatibility before quoting the upgrade. Call (833) 762-8116 to talk it through.
Do Delta faucet cartridges need OEM parts, or are aftermarket replacements okay? OEM is the safer call for cartridges and solenoids, since fit, finish, and warranty compatibility all depend on it. Aftermarket is more reasonable for a cosmetic trim piece when the specs match. We source OEM first and tell you when aftermarket is a fair trade. Call (833) 762-8116 for a free estimate.
What should I budget for a Delta-focused bathroom or kitchen update in Santa Clarita? Standard ranges for this market:
| Project | Typical Cost Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Kitchen Remodel | $14,000 – $45,000 |
A repair-only Delta cartridge or solenoid fix is far less than any of these. We give written, line-item quotes so you know exactly what’s included. Call (833) 762-8116 for a free estimate.
Is Barrett & Sons Construction Santa Clarita authorized by Delta? No. We’re an independent Delta service provider, not affiliated with or authorized by the manufacturer. We use OEM-compatible parts and follow Delta specs to keep your fixtures working as intended, but any manufacturer warranty claim runs through Delta directly. Call (833) 762-8116 to schedule a free estimate.
Book Your Delta Service in Santa Clarita, CA
Whether your Delta Monitor valve needs a cartridge, your Touch2O faucet has gone quiet, or you’re ready to fold new Delta fixtures into a bathroom or kitchen remodel, we’ll give you a written scope and a straight answer. A live person answers the phone any hour. Call (833) 762-8116 for a free estimate in Santa Clarita.
Written by the team at Barrett & Sons Construction Santa Clarita.