Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose CWS Construction
We provide independent CWS construction service in Santa Clarita, and what sets our CWS work apart is cabinet-level knowledge: we know how CWS Brookhaven, Colony, Lexington, and Manchester boxes are built, how their hinges and glides are specified, and why particleboard boxes swell after a slow leak. That’s the difference between a real repair path and a generic remodel pitch.

To be clear up front: Barrett & Sons Construction Santa Clarita is an independent service provider. We are not affiliated with, authorized by, or acting as an agent of CWS, and we don’t work inside any manufacturer’s warranty network. We work for you.
CWS cabinetry shows up all over Santa Clarita, from the master-planned tracts of Valencia and Canyon Country to older Newhall homes where the kitchen has already been redone once. Our crew members have up to 28 years of experience across kitchen work, and every eligible job comes with permits pulled, inspections signed, and a written 90-Day Done Right Promise.
Call (833) 762-8116 to schedule your free estimate.
Why Trust Barrett & Sons Construction Santa Clarita for Your CWS Construction?
Our technicians have spent up to 28 years working on cabinet systems with very specific conventions. CWS traces back to mid-century cabinet manufacturing, and its framed construction follows rules an experienced installer learns only by handling the product: how the face frame is fastened to the box, how the drawer glide rear bracket seats, how the door profile is meant to sit against the stile. We’ve seen enough of these units to read a symptom correctly the first time.
We use CWS-spec and OEM-compatible hinges, glides, shelf clips, and fasteners wherever the substrate is still sound, because the hardware is engineered for the box. When a profile is no longer available, we say so plainly and recommend the honest alternative – a quality aftermarket door or a reface.
Warranty-safe practice matters here too. We don’t cut, notch, or drill anything a manufacturer’s warranty would object to without telling you first, in writing, before any tool touches the cabinet. Scope in writing, allowances in writing, change orders in writing.
Tom Barrett publishes his name, his address, and his license number. Look it up before you sign anything – ours or anyone else’s.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Santa Clarita
These are the failures that actually show up in CWS cabinetry, and why they happen. If one of these sounds like your kitchen, you can match the symptom to a repair path instead of a guess.
- Swollen particleboard at the toe kick and under-sink base. Builder-grade CWS particleboard and MDF boxes absorb water from a slow supply-line or drain leak and swell along the bottom edge. Once the substrate expands, the box doesn’t shrink back. This is the single most common CWS problem we see in Santa Clarita, and it usually starts months before anyone notices the cabinet door sticking.
- Face-frame screws backing out of particleboard stiles on Brookhaven and Colony. When the screws holding the face frame to the box lose their bite in particleboard, doors sag and start rubbing on neighbors. It looks like a hinge problem. It usually isn’t.
- Failed drawer-glide tracks on older CWS lines. The nylon rollers flatten or break, or the rear bracket bends, so drawers drop and bind halfway. Often one glide lets go and the other follows within a few months.
- Peeling thermofoil or laminate door skins near the dishwasher and range. Heat and steam attack the adhesive at the door edges. Once a skin lifts, it keeps lifting. Warped profiles near the appliance run are the usual first sign.
- Doors that no longer sit flush across a run. This is almost always a box-and-frame problem underneath, not a hinge adjustment. Chasing it with screwdrivers just prolongs the decision.
A common CWS scenario is a Brookhaven or Colony kitchen where the base cabinets have swollen at the toe kick and the doors no longer sit flush, especially under the sink and beside the dishwasher. The usual cause is a slow supply-line or drain leak wicking into the particleboard box and face frame. A qualified local pro typically confirms the moisture source, replaces the compromised boxes or refaces the sound ones, and resets doors and drawers on fresh CWS-spec hardware – then checks whether the countertop and backsplash can be reused or must be reset. Fixing the cabinet without fixing the leak just buys a repeat.
CWS Parts & Our Repair-vs-Replace Approach
CWS-spec hinges, glides, and shelf clips are the right call when the cabinet box is sound, and we source them per job rather than promising anything off a truck. For obsolete CWS door profiles – some Lexington and Manchester runs are long discontinued – a quality aftermarket door or a reface is usually the honest answer, and we’ll tell you which and why in writing before you commit.
Repair beats replacement when the substrate is intact and the hardware has simply aged out. Replacement beats repair when the boxes are swollen or delaminating: no amount of new hardware fixes failed particleboard, and we won’t sell you a hardware refresh that fails in a year.
Call (833) 762-8116 for a free second opinion on any written estimate you’ve already received.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We find the moisture source before touching the cabinets – supply line, drain, dishwasher connection, or exterior intrusion – because a swollen CWS box will swell again if the leak stays.
- 2
Written scope and repair-or-replace call. You get a written scope with allowances spelled out and any price change issued as a change order before work proceeds.
- 3
Repair or install. We replace compromised boxes, reface sound ones, and reset doors and drawers on CWS-spec hardware. Perimeter countertop and backsplash are evaluated for reuse or reset.
- 4
Test and reset. Every drawer gets cycled, every door checked for rub, every hinge adjusted under load. We don’t call a run done until it opens and closes the way it should.
- 5
Warranty. Every completed job is backed by the written 90-Day Done Right Promise. If something isn’t right, one call brings the crew back.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Santa Clarita
We work across the CWS cabinet families you’ll find in Santa Clarita homes: Brookhaven framed cabinetry, Colony recessed-panel cabinets, the Lexington maple door series, and the Manchester shaker-style line. That covers full cabinet installation and refacing, door and drawer replacement, glide and hinge replacement, and countertop templating and installation on top of existing CWS boxes. If you have an older CWS line we haven’t named, call and describe the box and door – chances are we’ve handled the family. For kitchens that have moved past repair, we also handle full kitchen remodeling and quartz and granite countertops.

We Also Service These Brands
Barrett & Sons Construction Santa Clarita works across the brands you’ll actually find in area kitchens, so you’re not stuck calling a different outfit for every cabinet, counter, and fixture. Alongside CWS, we work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures. One crew, one scope in writing, one point of accountability.
FAQs – CWS Construction Service in Santa Clarita
No. We’re an independent CWS service provider. We are not affiliated with, authorized by, or acting as an agent of CWS, and we don’t perform work under the manufacturer’s warranty network. We work directly for you and stand behind our own written 90-Day Done Right Promise.
We use CWS-spec and OEM-compatible hinges, glides, shelf clips, and fasteners wherever the cabinet box is sound, and we source them per job. When a CWS profile is discontinued, we’ll tell you plainly in writing and lay out the aftermarket or reface option before you decide.
It depends on scope. A single cabinet box replacement or a glide and hinge reset is usually a short visit. A multi-box replacement with countertop reset takes longer, and you’ll get the timeline in the written scope before work starts. For an exact estimate on your kitchen, call (833) 762-8116 – estimates are free.
We cover Brookhaven framed cabinetry, Colony recessed-panel cabinets, the Lexington maple door series, and the Manchester shaker-style line, plus older CWS families you can describe over the phone. Call (833) 762-8116 and we’ll confirm your line before scheduling.
We can’t speak to CWS’s warranty terms, and we don’t act as a warranty agent. What we do is avoid cutting, notching, or drilling anything a manufacturer’s warranty would object to without telling you first, in writing. Call (833) 762-8116 to talk through your situation before any work begins.
It depends on whether the boxes are sound or need replacing. Here are our typical Santa Clarita ranges:
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (833) 762-8116 for an exact quote – estimates are free.
If the swelling is localized and the frame is intact, the compromised boxes can be replaced and the sound ones refaced. If the particleboard has swollen or delaminated across the base, replacement beats repair – new hardware won’t fix failed substrate. Call (833) 762-8116 and we’ll confirm the moisture source and give you the honest call.
Usually yes, if the Colony boxes are sound and dry. Recessing-panel doors and frames can be refaced over intact substrate, and it’s often the right call. Call (833) 762-8116 for a free estimate to confirm which boxes qualify.
Many do, and CWS-spec and OEM-compatible hardware is widely available per job. Some older and discontinued CWS lines use profiles that take an aftermarket match; we’ll confirm your specific unit before ordering anything. Call (833) 762-8116 with a cabinet photo and we’ll tell you what you’re working with.
An eased or small bevel edge pairs well with a shaker door like Lexington, keeping the clean lines without a square edge that chips easily at the corners. Call (833) 762-8116 to talk through profiles and get a quote.
Yes, in practice. CWS boxes are built to standard dimensions and the face-frame conventions determine where the countertop can scribe and support. A templater who reads the box and frame correctly gets a cleaner fit. Call (833) 762-8116 for a free estimate on templating and install.
Book Your CWS Service in Santa Clarita, CA
If your CWS kitchen needs a repair or a full refit, we’ll diagnose the cause, spell out the scope in writing, and give you an honest repair-or-replace call. Call Barrett & Sons Construction Santa Clarita at (833) 762-8116 for a free estimate. Permits pulled, inspections signed, and a written 90-Day Done Right Promise on every completed job.
Written by the team at Barrett & Sons Construction Santa Clarita.