Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Santa Monica, CA
We provide independent Jerith service across Santa Monica, from aluminum ornamental fence installation to vinyl privacy runs and the fence and gate work that goes with garage conversions. What makes our Jerith work different here is the coast: salt air and marine-layer fog eat fence and gate hardware faster than anything inland, so how a Jerith run is anchored and fastened in Santa Monica matters more than the panel itself. We are an independent installer, not authorized, sponsored or endorsed by Jerith. Call (833) 762-8116 for a free estimate.

Why Santa Monica Residents Choose Us for Jerith Service
We work on Jerith aluminum and vinyl ornamental fencing and railing most weeks. That means we know the bracket, post and picket systems by hand, not from a catalog page. We know where the finish fails first and which anchor hardware holds up at the beach. Our technicians have up to 28 years of experience, and they’ve learned that Santa Monica fence work rewards a builder who reads the site plan as carefully as the fence line.
We’re independent. Barrett & Sons Construction Santa Clarita is not manufacturer-affiliated or authorized by Jerith, and we say so plainly. We install and repair these products on their merits. We’re owner-operated, every price change is a written change order before work proceeds, and every eligible job includes permits pulled and inspections signed. The 90-Day Done Right Promise is written on the contract, not buried in fine print.
Parts are sourced per job to match your existing Jerith profile and finish, plus stainless and marine-grade anchor hardware where the coast demands it. We’ll also check that any new gate or fence tied to a permitted project matches what was approved.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Santa Monica
What fails on a Jerith run near the water rarely fails inland the same way. Here’s what we see most:
- Pitting and chalking on west- and south-facing pickets and rails. Salt-laden moisture from the marine layer sits on the finish and works it over. Powder-coat and paint fail first at cut ends, welded joints and scratch points, which is exactly where corrosion gets a foothold.
- Corroded base plates and anchor bolts at post feet. Where a fence line meets concrete, pavers or a stucco stem wall, moisture collects. That’s a slow failure, and it shows up as loose, wobbling posts after a few coastal seasons in Santa Monica.
- Gates that sag and hinges that bind. Salt and fog condensation stiffen rackable panel hardware and gate hardware. The frame is usually fine. The hardware isn’t.
- Posts set in sandy, sometimes poorly compacted soil. Near the bluffs and across older Ocean Park and north-of-Montana lots, posts can shift and let panels rack out of level and gates drift out of alignment.
- Fence and gate scope tied to a garage conversion or ADU. When a yard gets re-divided or a converted garage unit needs its own screened space, the fence line often has to be re-thought, re-permitted and reinstalled to match the site plan.
Jerith Service in Santa Monica: What Local Conditions Mean for Your Equipment
Santa Monica is a coastal city, but the corrosion story here is more specific than “salt air.” The marine layer keeps moisture pressed against fence lines for much of the year, and it settles unevenly. West- and south-facing elevations dry slowest, so a Jerith aluminum run that looks fine on the shaded east side of a property can pit and chalk badly on the street-facing side. That’s why we spec stainless and marine-grade anchor hardware on the coast even when the OEM galvanized parts would do fine in the Valley. The base plates and post feet are where salt moisture collects and sits, and they’re the first thing to go.
The soil matters too. In Ocean Park and the bluff-adjacent lots, sandy, sometimes loosely compacted ground lets posts shift, and a shifting post racks the whole panel out of level. Good installation here means setting posts into properly compacted ground with the right anchor depth, not just driving them in.
Jerith Models & Products We Service in Santa Monica
We install and repair the Jerith lines that show up on Santa Monica properties:
- Jerith Industrial Grade aluminum ornamental fence with rackable panels
- Jerith Residential aluminum ornamental fence series
- Jerith Regis aluminum railing and handrail systems
- Jerith vinyl privacy fence and picket fence lines
On parts, we use genuine Jerith replacement pickets, brackets, caps and gate hardware where the frame is sound. Where the coast is the enemy, we upgrade to aftermarket stainless fasteners and marine-grade anchor hardware because they outlast the OEM galvanized parts in salt air. We repair and re-anchor a solid Jerith frame rather than sell a replacement. Full replacement only makes sense when corrosion has eaten through rails or posts at grade.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Santa Monica
Below are the Santa Clarita-market ranges we work from. Santa Monica jobs often land on the higher end because of coastal anchor hardware, tighter access and permit review, but the quote you get is the quote you get, and any scope change arrives as a written change order before work happens.
| Service | Typical Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the number: linear footage, gate count and hardware grade, soil and anchor conditions, finish and profile, and whether the line ties to a permitted project. A free estimate includes a walk of the fence line, a check of the post anchors and a written, line-item quote. Call (833) 762-8116 for an exact quote for your Santa Monica property.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Santa Monica
It depends on height, location and whether the fence ties to a permitted project. Santa Monica’s permit environment is stricter than most of Southern California, and fence lines near a shoreline or a converted garage unit can pull in coastal review or site-plan scrutiny. We confirm what’s required before work starts and pull the permits on every eligible job. Call (833) 762-8116 to talk through your property.
That one-sided failure is the marine layer at work. West- and south-facing surfaces hold moisture longest, and the finish fails first at cut ends, welds and scratches, letting salt air attack the aluminum underneath. It’s a localized finish problem, not a bad fence. Call us and we’ll look at it.
Yes, most of the time. A sagging gate with binding hinges is usually corroded hardware and racked posts, not a bent frame. We re-anchor the posts with stainless hardware, replace the gate hardware and affected pickets, and recoil the sound sections. Replacement makes sense only when corrosion has eaten through rails or posts at grade. Call (833) 762-8116 for a look.
Often, yes. Because Santa Monica is built out and discretionary review limits new large construction, a lot of work here pushes toward ADUs, second units and garage conversions, and that scope routinely disturbs fence lines and gates. We make sure any re-anchored or new Jerith run matches the permitted site plan so it doesn’t cause trouble later.
Yes, with the right anchoring. Jerith aluminum ornamental and vinyl lines hold up well at the beach when they’re spec’d for the coast. The parts that fail are the OEM galvanized anchors and hinges, so we upgrade to stainless and marine-grade hardware. Call (833) 762-8116 and we’ll tell you what your line needs.
Service Areas Near Santa Monica
We work across the Santa Monica service area and out to nearby communities, including West Hollywood, Topanga, Calabasas, Santa Clarita, Stevenson Ranch and Castaic.
Book Your Jerith Service in Santa Monica Today
If your gate is dragging or your pickets are chalking on the sunny side, call (833) 762-8116. A live person answers 24/7, and estimates are free. Tell us what you’re seeing and we’ll walk the line with you.
Written by the team at Barrett & Sons Construction Santa Clarita.