Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Malibu, CA | Barrett & Sons Construction Santa Clarita
We provide independent Jerith service across Malibu, CA for aluminum and vinyl fencing and the driveway and hardscape work that surrounds it. The one thing that makes our Jerith work different here: we account for salt-laden marine air and Very High Fire Hazard Severity Zone rules in the same estimate, because a fence on a Malibu bluff has to survive both. Barrett & Sons Construction Santa Clarita has installed and serviced Jerith Aluminum Residential Series, Vinyl Privacy, Ornamental Aluminum, and Pool & Safety Fence lines across Malibu’s coastal and canyon properties. We are an independent contractor, not affiliated with Jerith. Call (833) 762-8116 to schedule a free estimate.

Why Malibu Residents Choose Us for Jerith Service
We know Jerith fencing down to the fastener. The powder-coated aluminum rails, the stainless hinge and latch screws, the tongue-and-groove vinyl panels, the self-latching pool gates – we’ve worked on all of it and seen how each part behaves in Malibu’s conditions. That matters because most fencing problems here aren’t installation failures. They’re material reactions to salt fog, wind load, and heat.
Our technicians have up to 28 years of experience, and we source OEM-compatible Jerith parts so color and profile match when you need a repair. We pull permits when a fence or driveway install requires one, and every price change arrives as a written change order before work moves. If a gate sags or a post shifts after we finish, the 90-Day Done Right Promise is on your contract in writing. Malibu gets a lot of contractors passing through. We’re the ones who make it right when the salt air does its work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Malibu
These are the Jerith failure modes we see most often on Malibu properties, tied to what’s actually happening to the material:
- Powder-coat chalking and filiform corrosion on horizontal rails. Salt-laden marine air settles on the top surfaces of aluminum rails and works into exposed cut ends. After several seasons of ocean-facing exposure, the finish goes chalky white and the corrosion creeps along the rail. We strip and re-coat or replace the affected pieces with OEM-matched rails.
- Galvanic corrosion at stainless hinge and latch screws in aluminum posts. Mixed metals plus salt air equals a chemical reaction. Gates start to sag and latches stick because the screws have corroded in the post. We replace them with compatible stainless hardware and reset the gate alignment.
- Vinyl privacy panels bowing or cracking under Santa Ana wind loads. When posts are set too shallow in sandy or decomposed-granite Malibu soils, a strong Santa Ana event torques the panels and they flex or crack. We check post depth and footing against the site before we call a repair done.
- Ember intrusion and heat deformation at gate gaps and post caps. In Malibu’s Very High Fire Hazard Severity Zones, combustible landscape meets fence line. Gaps at gates and hollow post caps can trap embers. We spec non-combustible footings and metal gates that close those gaps.
- Storm-twisted runs and impact damage. Winter rain and hillside erosion can shift footings and rack a whole fence line out of plumb. When corrosion is isolated, we repair. When a run is storm-twisted end to end, replacement is the honest answer.
Jerith Service in Malibu: What Local Conditions Mean for Your Equipment
Malibu’s Very High Fire Hazard Severity Zone rules require ember-resistant construction details and defensible-space landscaping, which changes how a Jerith fence gets installed here compared to almost anywhere nearby. Jerith installs in Malibu often need non-combustible post footings and metal gates that integrate with the home’s ignition-resistant assembly, so the fence isn’t a weak link in the fire perimeter. That’s a spec that rarely appears in neighboring Santa Monica fence work, where coastal salt is the only real driver. Here you’re designing for both salt-air corrosion and wildfire ember intrusion in the same assembly. A Jerith aluminum fence on a Point Dume ocean-facing property, for example, faces salt fog on the ocean side and ember exposure from the canyon side. The fasteners, the footing depth, and the gate closure all have to answer to two separate threats. A contractor who only knows one of them will get one of them wrong.
Jerith Models & Products We Service in Malibu
We service the Jerith Aluminum Residential Series in both 2-rail and 3-rail picket, plus the Ornamental Aluminum line in spear-top and flat-top profiles. For privacy, we handle the Jerith Vinyl Privacy Fence in 6 ft. tongue-and-groove panels. For pools and spas, we service and install Jerith Pool & Safety Fence with self-latching gates. On parts, we use Jerith OEM replacement rails, pickets, and hardware whenever color and profile matching matter – which it usually does on Malibu coastal properties with HOA visibility rules. For out-of-production colors or non-structural repairs, quality aftermarket aluminum components are a practical option. We source parts per job; we don’t claim local stock. Every estimate lists which parts are OEM and which are aftermarket.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Malibu
Jerith fencing and driveway work in Malibu runs higher than inland because of permit requirements, fire-zone detailing, and salt-air materials. Here’s what the market looks like:
| Service | Typical Price Range |
|---|---|
| Aluminum Fence Installation (Jerith) | $4,000 – $10,000 |
| Vinyl Fence Installation (Jerith) | $3,500 – $9,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
What drives the number: linear footage, gate count and hardware, footing depth required by Malibu’s geotechnical and fire-zone rules, and whether the permit is straightforward or needs coastal review. A free estimate includes a site walk, a measurement, a product spec with OEM vs. aftermarket clearly labeled, and a written scope. Call (833) 762-8116 for an exact quote – estimates are free.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Malibu
Jerith aluminum fencing is non-combustible, which is the core of what WUI rules ask for at the fence line, but the full assembly – footings, gate closure, post caps – has to be detailed to close ember gaps. Malibu’s Very High Fire Hazard Severity Zone rules require ember-resistant construction and defensible space, so we spec concrete footings and metal gates that integrate with the home’s ignition-resistant assembly. A stock install without those details may not pass review. Call (833) 762-8116 to walk through your fence line and fire-zone requirements.
Galvanic corrosion between stainless hinge and latch screws and the aluminum post is the usual cause. Salt-laden marine air drives the reaction, and after a few seasons the screws have corroded enough that the gate drops and the latch catches. We replace them with compatible stainless hardware and realign the gate. Call for a free estimate if your Malibu gate is sticking.
It can, but post depth and footing matter more than the panel itself. Vinyl panels bow or crack when posts are set too shallow in sandy or decomposed-granite Malibu soils, and a strong Santa Ana wind event will find that weakness. We check footing against the site’s soil and slope before installation, and we don’t set posts at a depth that won’t hold. Call for a free estimate and we’ll spec the footing for your specific lot.
Fence work near the coastline can require a coastal development permit, and the timeline depends on the parcel and the bluff or canyon conditions. Malibu construction is defined by the California Coastal Commission permit gauntlet and strict geotechnical review, so approvals can take longer than the build itself. We pull the permits and handle the review process on eligible jobs. Call (833) 762-8116 to find out what your property needs.
Isolated corrosion or impact damage is usually a repair – we treat and re-coat the rails and replace corroded hardware. Widespread powder-coat failure across an entire run, or storm-twisted sections that won’t realign, justify replacement. A free estimate will tell you which one you’re facing; call (833) 762-8116 – estimates are free.
Service Areas Near Malibu
We serve Jerith fence and driveway work throughout Malibu, including the 90265, 90263, and 90264 ZIP codes, and out to Agoura Hills and Calabasas to the north and east. We also cover Topanga, Santa Clarita, Stevenson Ranch, and Castaic. If your property sits on a bluff or canyon lot in one of these areas, ask about fire-zone footing requirements when you call. Our Malibu service area page covers what we do across the city.
Book Your Jerith Service in Malibu Today
Whether it’s a corroded gate, a bowed vinyl panel, or a new Jerith aluminum install on a WUI parcel, call (833) 762-8116 for a free estimate. We answer live, 24/7 – not a voicemail box. Every scope and every price change comes to you in writing before work moves. Malibu coastal work takes planning, so the earlier we walk the site, the better.
Written by the team at Barrett & Sons Construction Santa Clarita.