Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Santa Clarita, CA | Barrett & Sons Construction Santa Clarita
We provide independent Dvele construction and service across Santa Clarita, from the tract-heavy streets of Valencia and Saugus to the older custom stock in Newhall. The one thing that sets our Dvele work here apart is the approval layer: homes in Santa Clarita’s master-planned communities answer to HOA architectural review boards on top of city inspectors, so every envelope, roofing and glazing change we plan gets built to clear both. We’re an independent builder, not a Dvele dealer or factory representative, which means we recommend the right package for your lot without being locked into factory upsells. Call (833) 762-8116 for a free estimate.

Why Santa Clarita Residents Choose Us for Dvele Service
Barrett & Sons Construction has been owner-operated since 1998, and most days you’ll find the crew leads on site rather than a call center running the job by phone. We’ve spent that time learning how Dvele modular assemblies actually behave in the Santa Clarita valley’s heat and wind, where factory detailing built for milder climates gets tested hard.
We use factory-specified or equivalent-rated envelope, flashing and connector hardware, never unrated substitutes off a shelf. Glazing, roofing and finish specs get matched to Santa Clarita’s 100°F+ summers and dry Santa Ana wind exposure, not to a generic national spec sheet.
Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order before work moves. If something isn’t right, our 90-Day Done Right Promise brings us back on one call. That’s the standard we hold on every Dvele we touch in Santa Clarita.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Santa Clarita
These are the Dvele issues that come up most in the Santa Clarita valley, and why they show up here specifically:
- Cracked sealant and lifted flashing at module joints. Factory sealant and flashing details often aren’t rated for Santa Clarita’s run of 100°F+ summers and dry Santa Ana wind cycles. A few seasons in, the joints open and water starts finding its way behind the stucco. We open the joint, replace the flashing and sealant with heat- and wind-rated materials, and document the repair.
- Settlement and floor deflection where modules meet the foundation. Santa Clarita’s expansive soils and post-tension slab tie-ins are unforgiving. Where module-to-site connections weren’t detailed for that movement, you get squeaks, dips and hairline cracks at the marriage line. We check the tie details before assuming the envelope is the problem.
- Roof-to-wall transitions and ember-vulnerable vents. In wildland-interface neighborhoods around Santa Clarita, modular roof sections often fail defensible-space and WUI scrutiny because the venting and roof-to-wall detail weren’t built to that standard. We rework those details to match what the code and your insurer want to see.
- Utility stub-out and panel penetration rework. Marrying modular MEP rough-ins to local service and HOA-approved exterior routing is where a lot of Dvele jobs go sideways. Chases get re-cut, panels get relocated, and routing has to satisfy the architectural board as well as the city.
- Early stucco and joint cracking on wall panels. Factory panel detailing that wasn’t designed for high-desert swings shows up as cracking within the first few years, especially on south and west elevations. We evaluate whether it’s finish-level or structural before recommending anything.
Dvele Service in Santa Clarita: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Dvele exterior decision in Santa Clarita, and it wouldn’t be equally true in Lancaster or Palmdale: the master-planned communities built from the 1960s through the 2000s in Valencia, Canyon Country, Saugus and Newhall are governed by HOA architectural review boards that dictate everything from roof tile color to setback dimensions, on top of city permitting. A Dvele exterior change like a standing seam metal roof or a new window and door package can pass city plan check and still get rejected by the board if the profile, color or setback doesn’t match the tract’s design guidelines. That’s why we read the CC&Rs before we draw anything, and why we photograph and document every joint repair and envelope detail for both the HOA file and your WUI compliance record. A roof that satisfies the city but not the board is a roof you can’t install.
Dvele Models & Products We Service in Santa Clarita
We work on the full Dvele lineup as it shows up in Santa Clarita: the Aurora series and Solstice series single-family modular homes, Dvele ADU and accessory dwelling modular units, and custom-configured modular plans. Our approach on each is the same: use Dvele factory-specified or equivalent-rated parts for the envelope, flashing and connectors, and match every finish spec to this valley’s heat and wind exposure.
We don’t claim local parts stock. Components are sourced and verified per job, which means the correct flashing profile or connector arrives spec-matched rather than substituted with whatever’s closest. Where the modular envelope and connections are sound, we repair. Where water intrusion or structural deflection has already compromised the assembly, we’ll tell you plainly that replacement is the honest call.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Santa Clarita
Pricing depends on how much envelope and connection work the job needs, the roof profile and material you choose, and whether HOA approval adds a design-review step. A free estimate includes a written, line-item scope, a review of the existing joints and roof-to-wall ties, and a parts plan with the products named. Here’s what our common Dvele scopes run in the Santa Clarita market:
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Impact Window Installation | $8,000 – $25,000 |
Call (833) 762-8116 for an exact quote. Estimates are free, and any scope change that comes up mid-job arrives in writing before a nail moves.
Serving Santa Clarita, CA – Our Local Coverage Area
We serve Santa Clarita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Santa Clarita
Does my Dvele home’s metal roof need HOA approval in Valencia or Saugus before installation? Yes. In Valencia and Saugus, HOA architectural review approval is required before a metal roof goes on, and it’s separate from the city permit. We prepare the submittal with profile, color and documentation so the board reviews an accurate package, then pull the permit and schedule the inspection.
Why do Dvele modular joints crack in Santa Clarita’s heat? Because factory flashing and sealant designed for a milder climate can’t handle back-to-back summers over 100°F and dry Santa Ana winds. The joint opens as the material fatigues. The fix is replacing the flashing and sealant with heat- and wind-rated materials and verifying the roof-to-wall tie, not just caulking over it. Call (833) 762-8116 to have yours looked at.
Can a Dvele ADU be built on a Santa Clarita post-tension slab lot? It can, but the tension cables have to be located before any drilling or cutting into the slab. In Valencia and parts of Saugus, many homes sit on post-tension concrete, and hitting a cable can cause catastrophic failure. We locate and mark the slab before any tie-in work. For a pricing review of your ADU lot, call (833) 762-8116.
What roofing and venting do Santa Clarita WUI rules require on a Dvele home? In wildland-interface neighborhoods, you generally need fire-resistant roofing and ember-resistant venting, plus defensible-space clearing, to pass scrutiny. Modular roof sections often weren’t built to that standard, so the venting and roof-to-wall detail usually need rework. We document the work for your insurer and HOA file. Call (833) 762-8116 for a scoped estimate.
Is Barrett & Sons Construction Santa Clarita authorized by Dvele? No. We’re an independent builder, not a Dvele dealer or factory representative. That independence lets us recommend the right envelope, glazing and finish package for your Santa Clarita lot without factory upsells. We document, permit and build every Dvele job to the owner’s plan. Call (833) 762-8116 to talk through your project.
Service Areas Near Santa Clarita
We serve Dvele owners across Santa Clarita and the surrounding valley, including Stevenson Ranch, Castaic, Calabasas, Agoura Hills and Topanga. If you’re outside these towns, call and we’ll tell you straight whether we cover your street. You can also read more about our Santa Clarita service area.
Book Your Dvele Service in Santa Clarita Today
Whether it’s a cracked module joint, a metal roof that needs HOA clearance, or a full kitchen remodel on your Dvele home, call (833) 762-8116 for a free estimate. We’ll review the scope, name the products, and put it all in writing before work starts. Our technicians have up to 28 years of experience, and we’re ready to help.
Written by the team at Barrett & Sons Construction Santa Clarita.