A Barrett company - serving Santa Clarita, CA

KraftMaid Bathroom Remodeling in Santa Clarita, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Bathroom Remodeling: The Santa Clarita Owner’s Guide

Replacing a failed or worn KraftMaid bathroom component in Santa Clarita typically runs within a full bathroom remodel range of $9,000 – $28,000 when the scope grows past a single part, and a focused vanity, shower or tub-to-shower fix lands between $3,000 and $12,000 depending on what’s behind the wall. We install KraftMaid-compatible bathroom cabinetry and handle the plumbing, tile and waterproofing that surrounds it, with a written line-item quote and permits pulled on every eligible job. Most owners discover the problem slowly: a soft spot near the toe kick, a drawer that won’t glide shut, a door that hangs a quarter-inch off after two summers of dry heat. Then one morning the cabinet bottom gives, or the shower pan flexes underfoot, and the question stops being cosmetic.

construction workers installing exterior siding on a home addition project in Santa Clarita, CA

Call (833) 762-8116

Barrett & Sons Construction is an independent Santa Clarita remodeling company. We are not affiliated with KraftMaid, and we say that plainly. What we do is source the right replacement, install it to spec, and stand behind the work with our 90-Day Done Right Promise.

Which KraftMaid Models This Applies To

KraftMaid has built bathroom vanities and linen cabinets under several lines over the years, and the part you need depends on which one is in your Santa Clarita home. The most common in this area are the Brookfield, Deerfield and Hartford door styles, plus semi-custom vanity runs from the Waypoint and Premiere series. Each line uses different hinge boring patterns, drawer box dimensions and toe-kick heights, so a replacement door from one series usually won’t line up on another.

Here’s how to identify yours before you call anyone. Open the cabinet door and look for a manufacturing label stuck to the inside of the frame or the back panel. It carries the door style, finish code, and often the original order number. If the label is gone, measure the door width and height to the nearest sixteenth of an inch and note the hinge type: European concealed, face-frame overlay, or inset. Write down the drawer box depth and the glide brand if you can see it.

The OEM-versus-aftermarket decision matters more on KraftMaid than on cheap builder-grade cabinets, because the finish match is the whole ballgame. A factory door in the same stain code will match. A generic aftermarket door will be close and slightly wrong, and in a bathroom with a north-facing window you’ll see it every morning. If the cabinet box itself is sound and only the front is failing, a factory-matched door and drawer front is often the honest answer. If the box has swollen from moisture, no door swap saves it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Bathroom Remodeling Is Failing

  • Soft or crumbling cabinet bottom near the sink or shower. Particleboard and MDF cores soak up slow leaks from a supply line or a failing caulk bead and lose all their strength. By the time you feel the give, the damage has usually been spreading for months.
  • Drawers that stick, sag or won’t stay closed. Undermount glides wear at the track, and in Santa Clarita’s dry summer air the wood box shrinks just enough to throw the alignment off. A glide that needs a shove is a glide on its way out.
  • Doors that rub, gap or won’t sit flush. Concealed hinges fail at the adjustment screw first, then at the arm. A door that suddenly needs re-hanging after years of sitting fine usually means the hinge plate has pulled or the wood around it has dried and loosened.
  • Peeling finish, bubbling veneer or white haze on the cabinet face. Steam from a shower without a working fan does this. In a Santa Clarita bathroom with a small window and no exhaust, the finish breaks down faster than the cabinet underneath.
  • A shower pan that flexes, a tub surround that rocks, or grout that keeps cracking no matter how often you patch it. Movement underneath is the cause, not the grout. That points to a failed pan, a loose substrate, or water getting past the waterproofing layer.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Santa Clarita homeowners, the numbers break down like this. A single vanity installation with a KraftMaid-compatible cabinet runs $800 – $3,000. A shower replacement is $3,000 – $8,500, and a tub-to-shower conversion is $3,500 – $10,000. A walk-in shower installation runs $4,500 – $12,000. The full bathroom remodel range for this market is $9,000 – $28,000, and a small bathroom remodel is $5,000 – $12,000.

What drives the range is what’s behind the old part: whether the subfloor is sound, whether the waterproofing has to be rebuilt from the studs, and whether the valve or drain has to move. Our quotes are line-item, with the part, the labor, the tile, and the permit each written out separately. If a hidden problem turns up once the wall is open, you get a written change order before we touch it, not a surprise invoice at the end.

Every eligible Santa Clarita job gets permits pulled and inspections signed. The permit inspector works for you, not for us. And every completed job is backed by our 90-Day Done Right Promise, in writing on the contract.

construction workers installing exterior siding on a home addition project in Santa Clarita, CA

DIY or Call Us?

Some of this you can safely check yourself. You can open the cabinet, read the label, measure the door, tighten a hinge screw, and confirm whether the leak is active by drying the area and checking it the next day. You can also run the shower fan test: hold a tissue to the grille and see if it pulls.

What we don’t recommend is pulling a shower pan, cutting into a tub surround, or opening a wall to chase a leak on your own. Water damage hides behind tile and under subfloor, and a pan that comes out wrong floods the room below. Beyond that, moving a drain or a valve without a permit is a code problem you’ll inherit when you sell. Tile work, waterproofing and cabinet replacement done to spec are the jobs that need the call. If you’re in Santa Clarita and you’re not sure which side of the line your project sits on, call us and we’ll tell you straight. There’s no trip charge inside the county, and the second opinion on any written estimate is free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch