Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Santa Clarita Owner’s Guide
We build and finish KraftMaid cabinetry into home additions and ADUs in Santa Clarita, and the installed range for that work runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, with garage conversions landing between $30,000 – $80,000. If you’re here because a KraftMaid cabinet box, door, or drawer in an existing addition has failed, we can match the part and price it in writing.

Owners usually find the problem the slow way. A drawer in the ADU kitchen starts dragging in July, or a cabinet door near a Santa Clarita west-facing window won’t stay closed by August. Sometimes it’s water: a supply line under a KraftMaid vanity in a converted garage lets go, and the particleboard core swells before anyone notices. By the time you’re searching for a part number, the failure has usually been developing for a season or two.
Key Takeaways
- KraftMaid builds cabinet lines in several box constructions and door styles; the part must match the line, not just the color.
- Additions and ADUs in Santa Clarita face real heat cycling, and cabinet hardware and hinges take the brunt of it.
- We’re an independent contractor and not affiliated with KraftMaid; we source and install compatible parts.
- Every price change on an addition or ADU job reaches you as a written change order before work proceeds.
Which KraftMaid Models This Applies To
KraftMaid has built cabinet lines under different construction standards over the years, and the part that fits one won’t always fit another. The reliable way to identify what you have is to open a door and look at three things: the hinge brand stamped on the hinge cup, the interior finish and box material, and any label on the back panel or inside a drawer box. KraftMaid has used Blum and Grass hinges across different eras and lines, and the cup bore and overlay pattern differ between them. A 110-degree Blum clip-on and a Grass TEC won’t swap without redrilling, and redrilling a finished face frame in a Santa Clarita addition is how a small repair becomes a cabinet refacing.
Measure before you call anyone. Door overlay (full overlay versus partial), cabinet depth, and drawer box width at the slides are the three numbers that decide whether a replacement drops in or fights you. For drawer slides, measure the cabinet interior depth: a 21-inch box needs a 21-inch slide, and undersized slides are the most common mismatch we correct in ADU kitchens around Santa Clarita.
On OEM versus aftermarket: for hinges and slides, a quality aftermarket equivalent from Blum, Grass, or Salice is often the better long-term call, because these are the same hardware makers KraftMaid has sourced from. For doors, drawer fronts, and finished end panels, go OEM or go through a finisher who can match the stain and sheen, because a color mismatch in an open ADU kitchen is visible from the front door. Cambria, Silestone, and Kohler finishes come up often in these same kitchens, and matching across brands is where a written spec sheet saves a job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Home Additions & ADU Is Failing
- Doors that won’t stay closed or drift open. The hinge spring has fatigued or the cup screws have wallowed out the particleboard. In Santa Clarita heat, the wood swells and shrinks against a fixed hinge plate, and the screws loosen a little more each season. This is the single most common call we get on ADU cabinetry.
- Drawers that drag or jump the track. The slide rollers flat-spot or the cabinet box has racked slightly. A converted garage slab in Santa Clarita moves with our clay soils, and a box that was square at install can be a quarter-inch out of square in five years.
- Swollen or soft box corners under a sink or vanity. A slow supply-line weep or a drain drip saturates the core. Particleboard doesn’t dry back to shape; once it swells, the fix is a new box, not a patch.
- Finish cracking or peeling on door faces near windows. UV and the daily temperature swing on a west-facing wall in Santa Clarita age a factory finish faster than the rest of the kitchen. It shows first at the stiles and around the panel.
- A gap between cabinet and wall that keeps widening. The addition’s framing or the cabinet’s attachment has moved. This one matters because it’s a building issue, not a cabinet issue, and replacing the cabinet without addressing it just repeats the failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Parts and labor on a KraftMaid cabinet repair or replacement in a Santa Clarita addition or ADU typically run $400 – $1,800 for hinges, slides, and a door or drawer front, and $2,000 – $6,500 when a full cabinet box, vanity, or island section is replaced as part of the job. The range is driven by three things: whether the part is OEM or a matched aftermarket equivalent, whether the finish has to be color-matched, and whether the failure traces back to the building (framing, plumbing, or slab movement) rather than the cabinet.
You get a written line-item quote before anything is ordered, so you see the part cost and the labor separately. If the scope changes once we open the wall, that change arrives as a written change order before we proceed, not as a surprise on the final invoice. Every eligible job includes permits pulled and inspections signed, and every completed job carries our written 90-Day Done Right Promise: if it isn’t right, one call brings us back.
DIY or Call Us?
You can safely do the diagnosis yourself. Open the doors, photograph the hinge stamp, measure the drawer box and cabinet depth, and check for soft spots under the sink. That information is what lets us quote accurately over the phone.
Where DIY goes wrong is at the install and at anything behind the cabinet. Adjusting a European hinge is fine. Redrilling a stripped hinge plate in a finished face frame, cutting a drawer box to fit slides, or pulling a vanity to chase a supply-line leak is where homeowners in Santa Clarita end up with a bigger repair than they started with, and a slow leak behind a cabinet can run for weeks before it shows. If water is involved or the cabinet has separated from the wall, stop and call us at (833) 762-8116. The diagnosis call is free, and there’s no trip charge inside the county.
FAQs
KraftMaid cabinet boxes generally hold up well past 20 years, but hinges and drawer slides are the wear items and often need replacement in the 10-to-15-year range, sooner in a hot Santa Clarita addition where the cabinets sit against an exterior wall. Call (833) 762-8116 for an exact quote on your part; estimates are free.
Often, yes. Hinges can be adjusted and loose plates can be re-secured with proper inserts, and a single failed slide can be swapped without touching the box. Repair stops being the answer once the cabinet core has swollen from water or the box has racked out of square, because the new part won’t sit true on a bad box.
A hinge, slide, or door-front swap is typically a one-visit job of an hour or two once the right part is in hand. A cabinet box or vanity replacement in an ADU runs longer because it usually involves disconnecting plumbing and sometimes a permit, so we schedule it as a half-day to full-day visit and tell you which upfront.
We identify the line and hardware from the label and hinge stamp, then order the OEM part or a matched equivalent from Blum, Grass, or Salice depending on what your cabinet was built with. We don’t carry parts on a truck or stock them locally; we order to your specific cabinet, which is why the measurements matter. Call (833) 762-8116 and we’ll walk you through what to look for.
If you’re in Santa Clarita and a KraftMaid cabinet in your addition or ADU has failed, call (833) 762-8116 for a free estimate. We’ll confirm the part, give you a written price, and put the fix on the schedule. Our crew members have up to 28 years of experience, and we’re proud to have served local communities for over 29 years as an owner-operated company. We also work alongside Cambria, Silestone, and Kohler finishes in the same kitchens.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.