A Barrett company - serving Santa Clarita, CA

Cambria Home Additions & ADU in Santa Clarita, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU: The Santa Clarita Owner’s Guide

If you’re planning a Cambria-surfaced addition or ADU in Santa Clarita, expect to spend roughly $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU, with Cambria quartz tops, sills and finish details priced inside that scope. We install Cambria-compatible additions and ADUs across the Santa Clarita Valley, and every eligible job comes with permits pulled and inspections signed. There’s no same-day swap here – additions are planned construction, and we’ll tell you the real schedule before you sign.

construction workers installing exterior siding on a home addition project in Santa Clarita, CA

Call (833) 762-8116

Owners usually land on this page after something has already gone sideways. Maybe a previous contractor set a Cambria vanity top or kitchen island in a new ADU and the slab is now drifting off the cabinet line. Maybe the addition’s window sills are fine but the framing behind them has moved. Or maybe you’re early in the process and you want to know how Cambria gets specified, sourced and installed in a Santa Clarita addition so the finish work doesn’t fail five years in. All three are the same conversation.

Key Takeaways

  • Cambria home additions run about $45,000 – $130,000 in Santa Clarita; ADUs run $90,000 – $220,000.
  • Cambria is engineered quartz – it doesn’t want direct sun-baked exterior exposure the way natural stone might tolerate it.
  • Most Cambria failures we see aren’t the slab; they’re substrate, framing movement, or a slab set without a proper moisture barrier.
  • Every price change arrives as a written change order before work happens.
  • Barrett & Sons is an independent contractor. We are not affiliated with Cambria.

Which Cambria Models This Applies To

Cambria sells engineered quartz by color line, not by “model number” the way an appliance does. The names you’ll see on a fabricator’s sample board – Brittanicca, Ella, Torquay, Whitehall, Portrush, Skara Brae, Annaleigh – are the product lines. When we spec Cambria for a Santa Clarita addition, we’re matching the specific color to the room it lives in: a kitchen island in Saugus gets a busier pattern that hides wear, while a bathroom vanity in Valencia usually wants something calmer. The color line matters less than the slab thickness, edge profile and where it sits.

Here’s the identification step most homeowners skip. Cambria slabs are generally 2 cm or 3 cm thick, and stock dimensions run roughly 55 by 120 inches, though your fabricator may template and cut differently. If you’re trying to match an existing Cambria surface – say, an island in your current kitchen and you want the same color in a new ADU – photograph the slab, measure the thickness with a tape, and pull the color name from the original invoice or the fabricator’s file. Cambria’s own dealer locator can confirm which colors are current.

The OEM-versus-aftermarket question doesn’t apply the way it would to a garage-door spring. You can’t buy a “generic Cambria.” What you can do is confuse Cambria with Silestone, another engineered quartz – and the two don’t always match edge-for-edge if you’re trying to blend. For a Santa Clarita addition where the kitchen island and ADU kitchen need to feel like the same house, lock the color and fabricator early. KraftMaid cabinetry, Silestone tops, and Kohler fixtures are brands we also install when Cambria isn’t the right call for a given room.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Home Additions & ADU Is Failing

Cambria quartz is dense and stable, so when something fails in an addition, it usually isn’t the stone itself. Here’s what we’re called out to look at across the Santa Clarita Valley.

  • A hairline crack radiating from a sink cutout or cooktop edge. The cause is almost always a stress concentration from a cutout made too close to the edge, or a cabinet frame that settled under the slab. Cambria needs a solid, level substrate; a new ADU’s subfloor that dried out and shrank will telegraph movement up through it.
  • Seam lines opening up on a long island or counter run. Seams in Cambria should be tight and nearly invisible when set correctly. When they widen, it’s adhesive failure or movement between cabinet sections – common in additions where new framing and existing framing meet and move at different rates.
  • Discoloration or a dull ring near an exterior window sill. Cambria sills in Santa Clarita additions take real sun. UV exposure alone can dull a finish over time, but a ring or haze points to moisture wicking behind the sill. Fix the flashing and drainage before you replace the stone.
  • A slab that rocks or sounds hollow when tapped. That’s a void under the surface – wrong adhesive, a low spot in the substrate, or a cabinet run set out of level. It’s a re-set, not necessarily a replacement.
  • Chipping along the front edge of an island. Usually impact damage combined with a thin edge profile. Cambria chips less than natural stone, but it isn’t impact-proof. A bullnose or eased edge holds up better in a busy ADU kitchen than a sharp square edge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Cambria surfaces inside a Santa Clarita addition are priced as part of the whole scope, and the honest range for the addition itself is $45,000 – $130,000. An ADU runs $90,000 – $220,000. A garage conversion – a common way Santa Clarita homeowners add a rentable unit without new footprint – runs $30,000 – $80,000.

What drives the Cambria line item within that scope:

construction workers installing exterior siding on a home addition project in Santa Clarita, CA
  • Slab count and thickness (2 cm versus 3 cm)
  • Edge profile and number of finished edges
  • Cutouts for sinks, cooktops and outlets
  • Color line – some patterns carry a premium
  • Fabricator templating and installation labor
  • Transport and any crane or slab-carry labor

We quote parts and labor as separate, itemized lines. If the slab you picked is on backorder and the substitute costs more, you get a written change order before we cut anything – no surprise invoice at the end. The work is backed by the 90-Day Done Right Promise, and permits are pulled and inspections signed on every eligible job.

DIY or Call Us?

You can safely check a few things yourself. Run your hand across the top and feel for high spots or movement. Tap the surface lightly and listen for hollow sounds that suggest a void. Shine a flashlight along the seam lines and see if the gap is widening. Measure the slab thickness and photograph the color name for a match.

What you should not do yourself: lift, cut, or reset a Cambria slab. A 3 cm slab of engineered quartz is heavy and unforgiving, and a dropped slab can cut a hand or crack beyond repair. Fabricators template with laser equipment and install with suction cups and two to three people for a reason. There’s also a real safety issue if you’re chasing a slab in an active addition where framing, electrical or gas work is open – leave that to the crew. If your Cambria surface is failing, call Barrett & Sons at (833) 762-8116 for a free estimate. Estimates are free, and a free second opinion on any written estimate you already have is one of our standing offers.

FAQs

How long does Cambria last in a Santa Clarita addition?
Cambria quartz typically lasts decades indoors – 20 to 30 years is a reasonable expectation when it’s set on a stable substrate. Outdoors or in a sun-baked exposure here, that figure drops. Santa Clarita’s hot, dry summers and cool winters move framing slightly, and a slab set without a moisture barrier or over an unstable substrate will show movement years before a properly set slab does. Call (833) 762-8116 for an exact assessment – estimates are free.

Can a failing Cambria surface be repaired instead of replaced?
Sometimes. Seams can often be re-adhered, and minor chips can be filled by a fabricator. A crack that runs from a cutout or a slab that’s rocking on a void is usually a re-set, not a patch. We’ll tell you honestly which you’re looking at. Call (833) 762-8116 for a free estimate.

How long does it take to install Cambria in a Santa Clarita addition or ADU?
The install itself is one to three days of work on site, but the real timeline is templating, fabrication and scheduling – typically two to four weeks from slab selection to install. The full addition or ADU schedule around it runs months, not days, and we’ll give you a written schedule. Call (833) 762-8116 to talk through your timeline.

How do you source Cambria for a Santa Clarita job?
We source through Cambria’s authorized dealer and fabricator network, and we lock the color and thickness in writing before any cut is made. If the color is backordered, you get the substitute option and a written change order before we proceed. Call (833) 762-8116 for a free estimate.

If you’re ready to talk through a Cambria-surfaced addition or ADU in Santa Clarita – or you’re looking at a slab that’s already failing – call Barrett & Sons at (833) 762-8116 for a free estimate. We’re an independent contractor, not affiliated with Cambria, and we back every completed job with the 90-Day Done Right Promise. Our technicians have up to 28 years of experience, permits are pulled and inspections signed on every eligible job, and every price change arrives as a written change order before work proceeds.

Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch