Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Santa Clarita Owner’s Guide
We install and remodel kitchens around Blanco sinks and faucets, and a full kitchen remodel in Santa Clarita typically runs $14,000 to $45,000 depending on cabinet line, countertop material, and how far the layout changes. When a Blanco part is the reason you’re calling, we can usually tell you within a short conversation whether it’s a swap or something bigger. Most owners don’t notice a failing part until something gives: a faucet that drips at the base after the handle closes, a pull-down spray head that sags and won’t seat, a sink clamp that lets the bowl move a hair when you press on the rim. In a Santa Clarita kitchen, hard water from the area’s mineral-heavy supply tends to be the quiet culprit, eating at seals and cartridges long before anything looks wrong from across the room.

Which Blanco Models This Applies To
Blanco builds a wide spread of kitchen products, and the part you need depends entirely on which line you own. The sink side includes undermount stainless lines and the granite and composite bowls sold under names like Diamond, Valea, and Precis, each with its own mounting clip style and template. The faucet side runs from the pull-down models in the Empressa, Artisan, and Sonoma families to the filtered-water and bar faucets, and the cartridges and spray heads are not interchangeable across those families even when the faucets look similar on the counter. The reliable way to identify your part is to find the model number stamped on the underside of the sink rim or on the tag under the faucet base, then match it against the parts diagram for that exact model. Blanco does sell replacement cartridges, spray heads, and mounting hardware as OEM parts, and for faucets the OEM cartridge is almost always the right call because aftermarket equivalents vary in stem length and seal geometry. For sink hardware and clips, a quality aftermarket set can work fine if the dimensions match.
One note we tell every Santa Clarita homeowner: we’re an independent remodeling contractor and not affiliated with Blanco, so we source parts the same way you would, through authorized channels, and we won’t pretend otherwise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Kitchen Remodeling Is Failing
Here’s what a failing Blanco part actually looks like in a kitchen we’re called out to:
- A drip at the faucet base that won’t stop. The cartridge seal has worn, usually accelerated by Santa Clarita’s hard water leaving mineral deposits on the ceramic disc. You’ll see a faint ring of water at the base after every use.
- The pull-down spray head won’t stay seated. The internal magnet or the hose weight has given out. The head hangs a couple of inches low and dribbles when you shut the water off.
- The sink bowl shifts when you press the rim. An undermount clamp has loosened or corroded. This one matters because a bowl that moves can eventually stress the seal and let water into the cabinet below.
- Water pools in the cabinet under the sink. Could be a failed basket strainer gasket or a cracked tailpiece, and it’s the symptom that does the most hidden damage to a cabinet floor if left alone.
- The handle turns stiff or grinds. Mineral buildup inside the valve body, common in kitchens near the Santa Clara River corridor where water hardness runs high. Usually a cartridge or valve replacement, not a whole faucet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Santa Clarita, here’s what the work typically costs, parts and labor together:
- Faucet cartridge or spray head replacement: roughly $140 to $320 installed, depending on the Blanco model and whether the part is OEM.
- Basket strainer or sink drain assembly: about $150 to $350 installed.
- Undermount clamp and seal re-set on an existing Blanco sink: $200 to $450, including resealing.
- Full Blanco faucet replacement: $350 to $900 installed, depending on the faucet line you choose.
- If the sink itself has failed and you’re replacing it, that folds into a countertop or cabinet job, which lands in our standard kitchen remodel range of $14,000 to $45,000.
What drives the range is straightforward: the exact Blanco model, whether the part is OEM or a quality equivalent, and how much cabinet or countertop has to come apart to reach it. We quote parts and labor line by line, in writing, before anything starts. If the scope changes once we’re in, you get a written change order first, not a surprise invoice. Every job we complete is backed by our 90-Day Done Right Promise.

DIY or Call Us?
Some of this you can safely check yourself. Turn the water off under the sink, look for the model number on the faucet tag or sink rim, and confirm whether the leak is at the base, the spray head, or the drain. That saves time on the phone.
Where DIY goes wrong is at the supply lines and the undermount hardware. Shutoff valves in older Santa Clarita homes are often stiff or seized, and forcing one can turn a $200 cartridge swap into a flooded cabinet and a drywall repair. Undermount clamps carry real weight, and a bowl that lets go under a full sink of water is a mess nobody wants. A cartridge that’s cross-threaded or seated wrong will leak worse than the one you removed. If the shutoff won’t turn freely or the bowl moves, stop and call us at (833) 762-8116. We pull the right part for your Blanco model, install it, and test it under pressure before we leave.
FAQs
Expect five to ten years on a cartridge, shorter if your water runs hard. The mineral content here works on ceramic discs faster than in softer-water parts of California, so a cartridge that’s grinding at year six isn’t unusual. Call (833) 762-8116 and we’ll confirm whether it’s the cartridge or the valve body before you buy a part.
Often yes. A stiff or dripping Blanco faucet is usually just a cartridge, and a loose undermount sink is usually a clamp and seal set, not a new sink. We’ll tell you honestly when a repair is the right call and when the part is far enough gone that a replacement makes more sense.
A cartridge or spray head is typically under an hour. A sink drain assembly or undermount re-set runs one to three hours, mostly because we test for leaks and let the seal set properly. We’ll give you a realistic window when we quote.
We match your exact model number and order through authorized Blanco channels, so you get the correct OEM part rather than a lookalike. If an equivalent aftermarket part will do the job safely for less, we’ll say so and let you decide. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and countertop side when a sink job turns into a bigger kitchen project.
Call Barrett & Sons Construction Santa Clarita at (833) 762-8116 for a free estimate. We’re owner-operated, every eligible job gets permits pulled and inspections signed, and a live person answers the phone around the clock. Ask about our free second opinion on any written estimate and the permanent 10% Senior and Veteran discount.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.