A Barrett company - serving Santa Clarita, CA

Toto Home Additions & ADU in Santa Clarita, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Toto Home Additions & ADU: The Santa Clarita Owner’s Guide

If you’re planning a Toto-equipped addition or ADU in Santa Clarita, the realistic installed range is $45,000 – $130,000 depending on square footage, foundation work, and finish level. We’re an independent construction company, not affiliated with Toto, and we build additions and ADUs where Toto fixtures are specified for the bathrooms and kitchen. These are planned builds, not same-day jobs; the design, permits, and site work set the timeline before a single fixture gets set.

Two professional contractors installing asphalt roof shingles with pneumatic nail guns in Santa Clarita, CA

Call (833) 762-8116

Most Santa Clarita owners don’t start with a part problem. They start with a plan. Maybe the guest bath in your addition is going in over a Toto Washlet-ready toilet, or you’ve spec’d a Toto one-piece in the ADU and need the plumbing rough-in to match. The “failure” we see isn’t usually a broken fixture, it’s a mismatch: a drain rough-in set at the wrong distance, a supply line at the wrong height, or a Toto model that doesn’t fit the framed space. That’s where the guide below earns its keep.

Key Takeaways

  • Toto additions and ADUs in Santa Clarita run $45,000 – $130,000 installed; ADUs alone run $90,000 – $220,000.
  • Compatibility is a rough-in problem first, a fixture problem second. Measure before you order.
  • Permits get pulled and inspections get signed on every eligible job.
  • Every scope and price change arrives as a written change order before work proceeds.
  • Backed by our written 90-Day Done Right Promise.

Which Toto Models This Applies To

Toto isn’t one product line, and that matters when you’re building. The common residential fixtures you’ll spec into a Santa Clarita addition or ADU fall into a few families: the Drake and Eco Drake two-piece toilets (the workhorse, 1.28 gpf, standard 12-inch rough-in), the Aquia and Ultramax one-piece models, the Nexus and Carlyle lines for a more finished look, and the Washlet seat systems that many owners want wired in from the start.

Here’s the compatibility gotcha most people miss: Toto one-piece toilets and many Washlet-ready models need a GFCI-protected outlet within reach of the seat, and if you don’t plan that into the framing and electrical rough-in, you’re cutting drywall later. We’ve seen it in Stevenson Ranch builds where the outlet went in on the wrong wall after inspection. Figure the outlet location at the drawing stage, not after the tile’s up.

To confirm what you have or what you’re ordering, read the label inside the tank lid or on the back of the bowl, and measure the rough-in (the distance from the finished back wall to the center of the closet bolts). For a Toto, that number drives the whole spec. On OEM versus aftermarket: for Toto specifically, we recommend genuine Toto fill and flush valves when a fixture is under warranty, because the tolerances are tighter than generic replacements and the aftermarket units don’t always seat the same way.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Toto Home Additions & ADU Is Failing

When a Toto-spec’d addition or ADU has problems, they usually show up in one of five ways. Each points to a specific cause:

  • The toilet rocks or the flange sits proud of the finished floor. This is a rough-in error, not a fixture defect. The closet flange was set at the wrong height for the finished tile or LVP, so the toilet won’t sit flush. Catching it before the floor goes down saves a tear-out.
  • The Washlet outlet is on the wrong wall or isn’t GFCI. Electrical rough-in got planned before the fixture layout was final. Moving it after drywall means cutting and patching, so we lock the outlet location on the drawing.
  • The drain is slow or gurgles in the new bath. Usually a venting problem in the addition’s new drain run, not a Toto issue. A new bathroom needs its own vent path, and a shortcut there shows up as a slow drain within weeks.
  • Condensation or moisture on the addition’s exterior wall near the bath. In Santa Clarita’s hot, dry summers and cool nights, a poorly sealed wall assembly in a new bath sweats. That’s an insulation and vapor-barrier detail, and it’s fixable if you catch it before the drywall is painted.
  • The ADU’s water pressure drops when the Toto flushes. Undersized supply lines for the new fixture load. A 1.28 gpf Toto is efficient, but the supply run to a detached ADU needs to be sized for the whole building’s demand, not just one fixture.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Santa Clarita addition or ADU, here’s how the numbers break down. These are installed ranges, and every scope is written down before work starts:

Project Installed Range
Home Addition $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000
Bathroom Remodel (if you’re redoing the Toto bath) $9,000 – $28,000
Walk-In Shower Installation $4,500 – $12,000

What drives the range: square footage, foundation type, whether the ADU is detached or attached, electrical and plumbing runs, and finish level. A garage conversion is the lowest-cost path to an ADU because the shell and slab already exist. What’s included in every quote: permits pulled, inspections signed, a written scope, and written change orders for anything that shifts. We don’t stock Toto parts on a truck; fixtures get ordered to spec for your job. Your written line-item quote shows parts and labor separately, so you can see exactly what the Toto fixtures cost versus the build. Every completed job is backed by the 90-Day Done Right Promise.

DIY or Call Us?

Some things you can safely check yourself. Read the label inside the tank lid to confirm your Toto model. Measure the rough-in with a tape. Test the Washlet outlet with a plug-in GFCI tester. Those are safe, five-minute checks.

Two professional contractors installing asphalt roof shingles with pneumatic nail guns in Santa Clarita, CA

What you shouldn’t DIY: roughing in a new drain, setting a closet flange at the right height, running electrical to a bath, or cutting into a wall to move a supply line. These are the exact steps where a small mistake turns into a flooded subfloor or a failed inspection. The permit inspector works for you, not for us, and a rough-in done wrong fails that inspection and costs more to fix than to do right the first time.

If you’re past the checking stage and into the building stage, call us at (833) 762-8116 for a free estimate. We’ll walk the site, talk through the Toto spec, and put a written scope in your hands.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch