Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Santa Clarita Owner’s Guide
Windows and doors are not made by Schluter. Schluter Systems makes the waterproofing, uncoupling, edge-profile, and trim products that go around them: KERDI-FLEX flexible waterproofing membrane used at rough openings and thresholds, KERDI-BAND sealing strips for seams and corners, DITRA uncoupling membrane under tile at door transitions, RONDEC and SCHIENE edge profiles where tile meets a door jamb, and KERDI-TS and KERDI-LINE drains in adjacent wet areas. If a window leaks or a door threshold is passing water, the failing part usually is one of those Schluter membranes, bands, or profiles, not the window itself. In Santa Clarita, replacing a failed window or door runs $4,500-$15,000 for standard replacement and $8,000-$25,000 for impact-rated units, with the Schluter trim, membrane, and mortar work included in that range for the openings we touch. Owners usually find out hard: a water stain on the drywall under the window after the first big rain, bubbling paint at the door threshold, or a tile joint cracking right at the base of a slider.

Which Schluter Models This Applies To
Schluter’s window and door work is built around its waterproofing and trim lines, and the right part depends on where the failure is.
- KERDI-FLEX – the flexible membrane for sealing around rough openings, curbs, and anywhere the substrate moves. This is the go-to at window and door frames.
- KERDI-BAND – the sealing strip for seams, inside and outside corners, and the joint where the membrane meets the frame.
- KERDI-TS – a thin-set bonded waterproofing mat that lets you tie a threshold or balcony door into the membrane without a bonding flange.
- DITRA / DITRA-XL – uncoupling membrane for tile floors, including that strip right inside a door where the slab moves separately from the tile.
- RONDEC / SCHIENE – the metal and PVC edge profiles that finish tile against a jambs or a threshold.
Read the part: Schluter prints the product name and roll width on the packaging and along the roll edge. KERDI-BAND comes in widths from about 5 inches up to 7-1/4 inches; the wider the strip, the more overlap you get on each side of a seam. Match the membrane to the actual opening, not to what’s left in a bucket. On the OEM-versus-aftermarket question: we install genuine Schluter parts for one reason. The membrane system is only as good as the seam, and a knock-off band that doesn’t bond the same way as the KERDI-FLEX will fail at the corner within a couple of winters. For a window or door opening we do not substitute. Barrett & Sons Construction Santa Clarita is an independent service provider and is not affiliated with Schluter Systems.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
Five symptoms we see in Santa Clarita, and what each one is telling you.
- Water stain or paint bubble under the window. The KERDI-FLEX around the rough opening has let go or was never bonded correctly, and water is getting behind the frame.
- Peeling caulk or a soft threshold at an exterior door. The KERDI-BAND seam at the threshold has failed, and the sill is holding moisture it shouldn’t.
- Tile joint cracking at the door base. The uncoupling membrane under the tile is missing or short, so the slab’s movement is transferred straight into the grout.
- Musty smell near a tiled shower that backs a window wall. Waterproofing continuity between the shower and the window frame was never tied together; the membrane stops short.
- Loose or lifting edge profile at a jamb. The RONDEC or SCHIENE was set on an uneven substrate or without the right thin-set, and it’s pulling away.
Call us when the first one shows up. A small membrane failure under a window in Canyon Country or Saugus after a wet winter is usually a few hundred dollars to open, dry, and re-seal. Left through a second season, it becomes drywall replacement, framing repairs, and mold work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for the windows-and-doors work we do at Santa Clarita homes:
| Work | Santa Clarita Range | What’s Included |
|---|---|---|
| Standard window replacement | $4,500-$15,000 | Unit, rough-opening membrane (KERDI-FLEX/KERDI-BAND), flashing, trim, labor |
| Impact-rated window replacement | $8,000-$25,000 | Impact unit, membrane and sealing at openings, trim, labor |
| Door replacement with threshold waterproofing | Quoted per door | Door, KERDI-BAND threshold sealing, trim, labor |
| Membrane-only repair at an opening | Quoted per opening | Open, dry, re-membrane, re-tile or finish, labor |
What drives the range: the number of openings, window size and glass type, whether the existing opening needs framing repair, and how much trim and finish work gets redone. Impact-rated units sit at the top because the glass and frame are heavier and the installation is more involved. We give you a written line-item quote before anyone starts, and every price change gets a written change order before work moves. The work carries our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check some of this yourself. Look for stains, feel the threshold for softness, inspect the caulk line at a window’s exterior, and note any cracking at a door base. What you shouldn’t try to fix is the membrane itself. Waterproofing failures hide behind finish: dried-out thin-set, a short band at a corner, a membrane that was never bonded. Opening a window wall to chase a leak and re-sealing it right is a job for someone with the right materials and the experience to recognize the failure. Our technicians have up to 28 years of experience on exactly this kind of work, and we won’t disappear at the first sign of staining. If you’re not sure whether your opening needs a repair or a full window replacement, call (833) 762-8116 and we’ll come look, no trip charge inside the county.
FAQs
How long does a Schluter membrane at a window or door last? A properly bonded KERDI-FLEX or KERDI-BAND installation will outlast the window in a Santa Clarita climate, since the membrane isn’t exposed to sun. Failures come from installation, not the material: short overlaps, dirty substrate, or a membrane set over a wet surface. If your membrane was done right, expect 20-plus years.
Can the membrane be repaired instead of replaced? Often, yes. If water hasn’t gotten into the framing, we can open the finish, dry the substrate, and re-membrane the opening in a day or two. If you’ve had a wet winter with the leak going and the wall is soft, it’s a bigger repair. Call us to look before the next rain.
How long does the swap take? A membrane repair at one opening is typically one to two days, including dry time and finish. A full window or door replacement takes longer because the unit has to come out and go back in and the trim has to be redone. We’ll give you the timeline in the written quote.
How do you source the Schluter part? From authorized Schluter suppliers, matched to the product name and width on your existing roll or packaging. We don’t carry parts on a truck; we order what the job needs, genuine membrane and band, and install it once we’re on site. Call (833) 762-8116 for a free estimate.
Schluter isn’t the only brand we work with. We also install KraftMaid, Cambria, and Silestone in the rooms this window and door work runs into.
If a window in Santa Clarita is leaking or a door threshold is soft, don’t wait for the next storm. Barrett & Sons Construction Santa Clarita handles the membrane and trim work that makes a window or door opening watertight, with a written quote before we start and a straight answer if it’s a repair rather than a replacement. Call (833) 762-8116 to schedule your free estimate. Our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.