Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Santa Clarita Owner’s Guide
We install and repair Boral clay and concrete tile roofing throughout Santa Clarita, and most full roof replacements here run $8,000 – $20,000 depending on roof size, tile selection, and whether the underlayment and flashing get rebuilt along with the field tile. Individual Boral tile and component repairs are far smaller – most single-tile or flashing repairs land in the $400 – $1,800 roof repair range. Boral is a tile manufacturer, not an installer, so we’re an independent contractor and not affiliated with Boral.

Owners usually don’t notice a Boral roof problem until the wet season does the introductions. A hairline crack in a field tile becomes a stain on the ceiling two rooms away. A lifted ridge cap shows up as grit in the gutter after a wind event. Or a roofer walks the roof for an unrelated reason and says the words nobody wants to hear: “Your underlayment is shot even though your tile looks fine.” That last one is the most common call we get in Santa Clarita, and it’s the one where the diagnosis matters most, because Boral tile routinely outlasts the felt underneath it by a wide margin.
Key Takeaways
- Boral tile is durable; the underlayment and flashing under it are what usually fail first in Santa Clarita’s sun.
- Matching a replacement tile to your existing profile and color is the whole game – Boral has discontinued several lines.
- Most single-tile and flashing repairs fall in the $400 – $1,800 range; full replacement is $8,000 – $20,000.
- We pull permits on eligible roofing work and back it with the written 90-Day Done Right Promise.
Which Boral Models This Applies To
Boral’s residential roof line splits into two families you’ll run into on Santa Clarita homes: clay tile and concrete tile. On the clay side you have profiles like Saxony 900, Barcelona 900, and the flat or low-profile shingle-style clay. On the concrete side, the big names are the flat-profile and the “shingle-style” concrete tiles, plus the trim pieces – ridge, hip, starter, and eave closures – that make a roof watertight at the edges. Those trim and closure pieces are where we spend most of our repair time, because they take the wind and the sun first.
Here’s the compatibility gotcha most homeowners miss: Boral has retired and reformulated several clay and concrete lines over the years, and tile dimensions are not universal across manufacturers. A replacement field tile that’s 1/4 inch wider or a slightly different profile than yours won’t interlock correctly with the course next to it, and you’ll get a water path you can’t see until the next storm. When we source a match, we verify the profile, dimensions, and color against what’s actually on your roof – not against a catalog photo.
Identifying your tile: check the original build or re-roof permit records (the county and city keep these), measure a field tile’s exposed width and thickness, and photograph the back stamp if there is one. That stamp is the closest thing to a model number you’ll get. On the OEM-versus-aftermarket decision: for field tiles, a quality aftermarket tile that matches the profile is usually fine and often the only option if a line is retired. For ridge, hip, and closure pieces – the ones doing the structural waterproofing – we push toward the OEM part or a dead-match equivalent, because a loose fit there is a leak waiting for winter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Cracked or broken field tiles. Usually impact damage from a fallen limb or something striking the roof, sometimes a tile that was walked on. A broken tile only leaks once the felt below it has been breached, but it lets water pool where it shouldn’t.
- Lifted or displaced ridge and hip caps. Caused by high wind and adhesive that’s aged out. Once a cap shifts, the ridge becomes an open channel for rain, and this is a common wind-damage find around Santa Clarita.
- Grit or granules in the gutters and downspouts. That grit is underlayment breaking down, not the tile. Tile roofs here very often look perfect from the street while the felt underneath is at the end of its service life.
- Dark streaks, moss, or efflorescence on shaded slopes. North-facing and tree-shaded slopes hold moisture longer; the staining itself is cosmetic, but it tells you which slopes are staying wet, and wet slopes age the underlayment faster.
- Ceiling stains or dampness after rain. The tile didn’t fail – the flashing around a vent, skylight, or chimney did, or the underlayment did. This is the symptom that means stop guessing and get someone on the roof.
One reality worth knowing for Santa Clarita specifically: the dry-season heat swings and the occasional hard rain do more to your underlayment and flashing than to the tile itself. A tile roof that looks untouched at 25 years old may have felt under it that’s already past its expected life. That’s the gap between “the part looks fine” and “the part is fine.”
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how Boral-related roofing work prices out in Santa Clarita:
| Work | Typical installed range |
|---|---|
| Roof repair (single tile, flashing, localized) | $400 – $1,800 |
| Tile roof repair (larger repair, ridge/hip caps) | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
Small repairs sit at the low end when it’s a handful of tiles or one flashing detail; the high end means several areas, ridge caps, and some underlayment work folded in. Full replacement is driven by square footage, whether the tile can be salvaged, how much underlayment and flashing get rebuilt, and the tile profile you choose. We write the parts and labor out line by line so you can see what the tile costs versus what the labor costs. On eligible work we pull the permit, and we back the job with the written 90-Day Done Right Promise – one call brings us back if something isn’t right.
DIY or Call Us?
There’s an honest line here. You can safely get on a ladder at the eave and look, photograph the ridges and valleys with your phone from a distance, check the attic for daylight or staining after a rain, and clear your gutters. That’s checking, and it’s worth doing.
Where it goes wrong: walking a tile roof. Boral clay and concrete tile are brittle, and pressing a foot in the wrong spot cracks tiles that were fine – your “free” inspection just cost you a repair. Climbing and working at roof height on a pitch is also genuinely dangerous, and this is the kind of work where the right move is a trained professional. Lifting tiles to diagnose or replace underlayment and flashing takes knowing where the water path runs and how to re-seat everything so it doesn’t leak. That’s not a weekend project.
If you’ve got a stain, a lifted cap, or a roofer told you the underlayment is done, call (833) 762-8116 for a free estimate. A live person answers the phone, and we’ll tell you straight whether it’s a repair or a replacement.
FAQs
Boral clay and concrete tile routinely last decades – often well past 40 years – but the underlayment and flashing underneath it typically don’t. That means the roof’s watertightness can fail long before the tile does, so the tile’s lifespan and your roof’s lifespan aren’t the same number. Call (833) 762-8116 for a free estimate if you’re unsure which one you’re up against.
Yes, in most cases – single tiles, a broken run, ridge caps, and flashing are all repairable, usually in the $400 – $1,800 range. Replacement only comes up when the underlayment is broadly spent or the tile is failing across whole slopes. Call (833) 762-8116 and we’ll give you a straight answer on repair versus replace.
Most single-tile and small flashing repairs are a same-visit job, done in a day; larger repairs or partial replacements take longer depending on access and how much underlayment is involved. Call (833) 762-8116 for a free estimate and a realistic timeline for your roof.
We match your existing tile by profile, dimensions, and color, and we check permit records and tile back stamps to identify a discontinued line. When an exact OEM match isn’t available, we tell you that plainly and offer a profile-matched equivalent – we don’t substitute and hope. Call (833) 762-8116 for a free estimate, and we’ll walk your roof and figure out what you actually need.
We also work with premium brands across the trades – KraftMaid, Cambria, and Silestone among them – the kind of materials you can look up yourself rather than take on faith. Every scope and every price change comes to you in writing before we touch the roof, and a live person answers the phone 24/7. Call (833) 762-8116 to schedule your free estimate in Santa Clarita and get a line-item quote on your Boral roof.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.