Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Santa Clarita Owner’s Guide
We build and finish Boral-compatible home additions and ADUs in Santa Clarita, and most of these projects land between $45,000 and $130,000 depending on size and finish level. An ADU typically runs higher, from $90,000 to $220,000. These are planned builds, not emergency repairs, so scheduling follows permit timelines rather than same-day dispatch; we give you a written scope and a start window up front. When it comes to Boral components, the problems we see are rarely the material itself. They show up years later as hairline cracks at a control joint, a sill that won’t sit flat, or trim that starts pulling away after a hot Santa Clarita summer.

Which Boral Models This Applies To
Boral covers a wide range under one name, and the part you need depends entirely on which line went into your build. Their trim and siding products, block and masonry units, and roof tile lines each carry their own profile numbers and dimensional specs, and they don’t interchange. Before you order anything, find the product label or stamp on the back of a piece, or measure the actual face width, thickness, and length of the failing unit down to the sixteenth of an inch. A half-inch difference in profile is the most common reason a replacement piece won’t seat against the existing run.
That’s the compatibility gotcha worth knowing: two pieces that look identical at the supply yard can have different nailing flanges or lap dimensions, and mixing them mid-wall creates a joint that moves differently than the rest. On the OEM-versus-aftermarket question, we lean toward matching the original Boral profile when it’s still available, because color and texture batches drift between production runs. If the original line is discontinued, a quality aftermarket equivalent can work, but we always dry-fit a sample against the existing wall before committing to a full order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Boral products are durable, but Santa Clarita’s swing between dry 100-degree summers and cool wet winters works on every exterior surface. Here’s what owners typically notice first:
- Hairline cracks along a wall or trim run. Usually movement at a control joint or a fastener that’s backed out, not a material defect. Catching it early keeps water out of the framing.
- Trim or cladding pulling away from the wall. Often a fastener or adhesive failure behind the piece. Left alone, it invites wind-driven rain into the wall cavity.
- Chalking or fading that won’t wash off. Sun exposure on a finish that’s reached the end of its service life. Common on south and west faces in Santa Clarita.
- Roof tile that’s shifted, cracked, or slipped out of course. A broken tile or a failed fastener underneath lets the next layer of protection take the load. Worth a look before the rainy season.
- Efflorescence or staining on block or masonry. White powdery bloom or dark streaks usually point to moisture moving through the assembly. It’s a symptom to trace, not just a surface to clean.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a home addition or ADU build-out in Santa Clarita, the Boral material portion is a slice of the total, not the whole bill. Our published ranges: Home Addition $45,000 – $130,000, ADU Construction $90,000 – $220,000, and Garage Conversion $30,000 – $80,000. What moves the number is square footage, foundation and framing scope, how much Boral trim, siding, or masonry is specified, and the finish level you choose.
We price the material and the labor as separate line items so you can see exactly what a Boral component costs versus installation. Every scope, allowance, and price change arrives as a written change order before work starts, so there’s no surprise invoice at the end. Permits are pulled and inspections signed on every eligible job, and finished work is covered by our written 90-Day Done Right Promise. On a smaller isolated repair to existing Boral material, the $40 Off Any Repair Over $200 offer applies, and the Free Second Opinion on Any Written Estimate is there if you’re comparing bids.
DIY or Call Us?
You can safely handle the inspection side yourself. Find the product label or stamp, measure the failing piece, photograph the damage from a few angles, and note whether the issue is surface-level or structural. That information saves time on the estimate. Where DIY goes wrong on additions and ADU work is the structural and weather-tight side: cutting into a wall, re-flashing a roof penetration, or patching a foundation without knowing what’s behind it can turn a small repair into a much bigger bill. Roof work at height and anything touching the structural frame should go to a trained crew, full stop.
Barrett & Sons Construction Santa Clarita is an independent contractor and is not affiliated with Boral. We install and repair Boral-compatible materials, and we also work with KraftMaid, Cambria, and Silestone on the interior side of addition projects. If you’re not sure whether your issue is a part replacement or a larger scope, call (833) 762-8116. A live person answers, and the estimate is free.
FAQs
Most Boral exterior trim, siding, and roof tile products are built to last decades, commonly 30 years or more when installed correctly and kept painted or sealed. Santa Clarita’s intense sun and dry summers speed up finish fading on west-facing walls, so expect to recoat paint or sealant more often than in a cooler climate. Call (833) 762-8116 for an exact quote on repair or replacement; estimates are free.
Often yes, especially for a single cracked tile, a loose trim piece, or surface staining that hasn’t compromised the material. If the damage is isolated and the surrounding material is sound, a targeted repair is usually the right call. If the failure is widespread or moisture has gotten behind the assembly, replacement becomes the honest answer. Call (833) 762-8116 and we’ll tell you which one you’re looking at.
A single isolated repair, like one roof tile or a short trim run, typically takes a few hours to a day. A larger section replacement or anything requiring wall opening can run several days, and a full addition or ADU is a multi-week permit-driven project. We give you a written timeline before work starts, not a guess on the phone.
We start from the product label or stamp on your existing material and match the profile, dimensions, and batch where possible. If the original line is discontinued, we dry-fit a quality aftermarket equivalent against the existing wall before ordering the full quantity. We don’t claim to stock parts or carry them on a truck; sourcing is matched to your specific build. Call (833) 762-8116 to start with a free estimate.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.