Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Santa Clarita Owner’s Guide
CGI is a window, door, and glazing brand, not a builder of additions or ADUs. On this page we’re talking about the one part of a CGI product that actually fails in a Santa Clarita addition or ADU: the glazing, glass units, and sliding door hardware in CGI windows and patio doors installed in these structures. A full home addition in Santa Clarita typically runs $45,000 – $130,000, and an ADU $90,000 – $220,000. Replacement of failed CGI glass units and door components on an existing addition usually falls in the low thousands, often same-day for hardware.
Owners usually find the problem the same way. A hazy, fogged pane in the addition’s window. A sliding patio door that sticks, then drags, then won’t latch. A cold draft in the new bedroom during a Santa Clarita cold snap. These are the CGI glazing and hardware failures we get called out for most.

Which CGI Models This Applies To
CGI manufactures several window and door lines, and the right replacement glass unit or hardware depends on which one is in your addition. Before we order anything, we read three things off the existing product: the manufacturer label etched in the glass or printed on the spacer, the frame and sash dimensions, and the glazing thickness. That label is your key. It tells us the series, the glazing package, and the low-E or tempered designation, which matters because California’s Title 24 energy rules on a permitted addition or ADU often require specific glazing ratings at the time of construction.
OEM CGI glass units are the cleanest match when the model is current. When the series has been discontinued or the hardware is obsolete, a quality aftermarket unit from a reputable glazing supplier made to the same dimensions and rating is a sound substitute, and we’ll tell you plainly which one you’re getting. We don’t carry parts and we don’t stock glass. We measure, we match, and we install.
Barrett & Sons Construction Santa Clarita is an independent service provider. We aren’t affiliated with CGI.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Glazing or Door Hardware Is Failing
Here’s what we see on additions and ADUs across Santa Clarita, and what’s actually going on underneath:
- Foggy or hazy glass. The sealed glass unit’s moisture barrier has failed and interior air is condensing inside the pane. It won’t clear on its own, and the insulation value is gone.
- Sliding patio door drags or won’t lock. Usually worn rollers, a bent track, or a failing multi-point latch. Common on the west- and south-facing doors in the addition where sun and thermal movement work the frame hardest.
- Cold draft along the sash or threshold. Weatherstripping has flattened, or the glazing seal is compromised. In the high-desert edge of Santa Clarita where nights drop hard, you’ll feel this before you see it.
- Water staining on the interior sill. A failing glazing seal or flashing detail letting water past. On an addition this can reach the framing if it’s ignored through a rainy season.
- Cracked or chipped pane. Impact or thermal stress fracture. On an addition’s tall glass, this is a safety issue and wants attention sooner rather than later.
If you’re seeing any of these, it’s worth a look before the dry season ends. Call (833) 762-8116 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For context on the scope you’re working within, a full home addition in Santa Clarita runs $45,000 – $130,000 and an ADU $90,000 – $220,000. Replacement of failed CGI glass, glazing, or door hardware on an existing addition is far less:

| Item | Typical range |
|---|---|
| Replacement sealed glass unit (per window) | $250 – $800 |
| Patio door roller / hardware replacement | $200 – $650 |
| Weatherstripping and threshold refresh | $150 – $450 |
| Full sliding door panel replacement | $600 – $2,000 |
The range swings on glazing size, tempered versus standard, and whether the door is a standard slider or a multi-panel. What drives it most is the match: an obsolete series can mean a custom-cut unit. Every price change arrives as a written change order before we start, and the work is backed by our 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can safely check yourself. Open and close the sliding door and listen for the drag. Look at the window glass for fog between the panes. Feel along the sash and threshold for a draft. Clean the door track and see if that resolves the sticking, because sometimes it’s just grit. Those checks cost nothing and tell you a lot.
Where it goes wrong: cutting and setting a sealed glass unit yourself. Glass units are heavy, sharp, and a tempered pane that shatters unexpectedly can cause serious injury, and a poorly seated unit will fog again within a season. Replacement of a full door panel on a permitted addition also involves getting the opening and flashing right, or you’ll be chasing water next winter. That part belongs in the hands of an experienced installer. Our team’s technicians have up to 28 years of experience with glazing and door work. Call (833) 762-8116 to schedule your free estimate.
FAQs
A sealed glass unit typically lasts 10 to 20 years before the moisture barrier fails. Sliding door rollers and latches usually wear out in 8 to 15 years. In Santa Clarita’s dry heat and hard sun, sun-facing glazing on an addition tends to age faster than the rest of the house. Call (833) 762-8116 for an exact assessment.
Sometimes. Worn door rollers and weatherstripping can often be replaced on their own, which is the cheaper path. A fogged sealed glass unit, though, is not repairable once the seal is gone; the unit has to be replaced. Call (833) 762-8116 and we’ll tell you honestly which you’re facing before you spend anything.
Hardware like rollers and weatherstripping is usually a short visit, under two hours. A full glass unit replacement typically takes one to three hours per window, depending on size. If we need to order an exact-match unit for an obsolete series, plan on a few days for the part to arrive, then the install itself. Call (833) 762-8116 for a realistic timeline.
We identify the CGI series from the glass label and dimensions, then order an OEM unit when the model is current or a quality aftermarket equivalent made to spec when it isn’t. We don’t stock parts or carry them on a truck; we match and order the right one. Call (833) 762-8116 for a free second opinion on any written estimate.
If your addition or ADU has a CGI window that’s fogged, a patio door that won’t glide, or a draft you can’t pin down, we’d like to take a look. Call Barrett & Sons Construction Santa Clarita at (833) 762-8116 to schedule your free estimate. We also service KraftMaid, Cambria, and Silestone products across the trades. Every eligible job gets permits pulled and inspections signed, and we don’t move until the scope and price are in writing.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.