Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Santa Clarita Owner’s Guide
Kitchen remodeling with Mr-Glass products in Santa Clarita typically runs $14,000 to $45,000 installed, depending on whether you’re swapping cabinets, counters, and backsplash or doing a full tear-out. We handle Mr-Glass-compatible kitchen work across the Santa Clarita Valley, and every job starts with a free written estimate – not a phone number guessed at the door. To be clear up front: Barrett & Sons Construction Santa Clarita is an independent service provider and is not affiliated with Mr-Glass.

Most Santa Clarita owners don’t go looking for this page until something gives. A cabinet door that won’t stay closed. A drawer that sags no matter how many times you tighten the screws. A countertop seam that’s started to show a hairline crack after a hot summer. Or a backsplash tile that’s popped loose above the range. By the time you’re reading this, you’ve usually already stood in the kitchen with a flashlight, poked at the failing piece, and asked yourself whether it’s a five-dollar fix or a five-figure problem. That’s exactly the question we answer below.
Key Takeaways
- Installed kitchen remodeling in Santa Clarita runs $14,000-$45,000; smaller kitchens land $9,000-$20,000.
- Cabinet installation alone is $4,000-$13,000; countertops $2,000-$6,500; backsplash $800-$2,500; islands $3,000-$10,000.
- Identify your Mr-Glass model line before ordering anything – the hardware spec changes between series.
- We don’t stock parts and we don’t carry them on a truck. We source the right part for your model and install it.
- Every eligible job gets permits pulled and inspections signed, with written change orders before any scope change.
Which Mr-Glass Models This Applies To
Mr-Glass kitchen products show up in Santa Clarita homes in a few recognizable configurations: full cabinet runs with matching door fronts, drawer boxes on side-mount or undermount slides, and countertop and backsplash packages designed to sit alongside those cabinets. The model and series matter because the mounting specs, hinge boring patterns, and slide lengths change between lines. A drawer slide that fits one series won’t line up on another, and a cabinet door ordered against the wrong hinge pattern will hang crooked no matter how carefully it’s installed.
Before you order anything, find three things. First, the model or series label – it’s usually on a sticker inside a cabinet door or on the back panel of a drawer box. Second, measure the drawer box itself: width, depth, and the slide length. Third, photograph the hinge and the mounting plate, front and side. Those three pieces of information are what determines whether you get the right part the first time.
On the OEM-versus-aftermarket question: for structural cabinet hardware and anything load-bearing, go OEM or a spec-matched equivalent. For cosmetic items – a door front, a filler strip, a shelf pin – a quality aftermarket match is fine and usually cheaper. The failure mode we see most in Santa Clarita is an owner ordering an aftermarket slide that’s close but not exact, then discovering the drawer sits a quarter inch proud of the cabinet face. Close isn’t the same as correct.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
Santa Clarita’s dry summers and the temperature swings between an air-conditioned kitchen and a hot garage put real stress on cabinet and counter materials. Here’s what we see go first, and why:
- Drawers that sag or stick. The slide has worn or the mounting screws have pulled out of the cabinet side. Once a screw hole strips, tightening it does nothing – the hole needs to be filled and re-drilled or the slide relocated.
- Cabinet doors that won’t stay closed or hang crooked. The hinge has failed or the hinge plate has loosened. In dry Santa Clarita air, wood cabinet frames can shrink slightly, which puts extra load on the hinge over time.
- Countertop seams showing hairline cracks. Thermal movement, not impact, is the usual culprit. A seam that’s opened up is a sign the adhesive has given way and needs to be reset before water gets in.
- Backsplash tile popping loose. Usually a thinset failure, often above the range where heat cycles hit hardest. A loose tile means the bond behind it has failed, not just the tile.
- Water staining or soft spots under the sink. A slow leak from a supply line or disposal connection has been soaking the cabinet base. This one needs to be handled before any cosmetic work, because soft cabinet base material won’t hold a new slide or shelf.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen work runs in Santa Clarita, installed, with parts and labor broken out honestly:
| Item | Installed Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: cabinet count and whether you’re reusing boxes or replacing them, counter material (a Cambria quartz surface sits at the top of that range; a laminate sits at the bottom), and whether the job needs electrical or plumbing moved. We don’t quote a number on the phone and change it at the door. Every scope, every allowance, and every price change arrives as a written change order before work happens. Every completed job is backed by our written 90-Day Done Right Promise: if it’s not done right, one call brings us back. You can also use our Free Second Opinion on Any Written Estimate if you already have a quote in hand.
DIY or Call Us?
Some of this you can check yourself safely. Open the cabinet, look at the hinge plate and the slide, photograph what’s there, and confirm your model number. That much is free and it helps you either way.
Where DIY goes wrong: replacing a load-bearing cabinet run, resetting a countertop seam, or re-setting backsplash tile over a failed thinset bed. Cabinets carry real weight, and a counter that isn’t seated correctly can crack under load. If your cabinet base is soft from a leak, that’s not a hardware swap – that’s a repair that needs to happen first. And if you’re looking at anything that involves moving a gas line for a new range location, stop there: gas work isn’t a homeowner job, and it’s not something to guess at. That needs a licensed professional, plain and simple.
We’ve been doing this work in Santa Clarita for over 29 years, founded in 1998 and owner-operated from day one. Tom Barrett and his sons are on-site most days, and every eligible job gets permits pulled and inspections signed – because the last contractor most folks used told them permits were optional. Call (833) 762-8116 and you’ll get a live person, 24/7.
FAQs
Quality cabinets hold up well, but the hardware – hinges and slides – is usually the first thing to go, often in the 10-to-15-year range with daily use. Santa Clarita’s dry air and hot summers speed up wear on wood frames and adhesive, so door alignment and countertop seams deserve a look every few years. Call (833) 762-8116 for a free estimate on replacing the failing hardware or cabinet run.
Sometimes yes. A loose hinge plate can often be re-seated, and a drawer slide that’s simply out of alignment can be adjusted back into line. What can’t be saved is a stripped screw hole in the cabinet side, a failed thinset bed behind a loose backsplash tile, or a cabinet base that’s gone soft from a leak – those need actual repair or replacement. We’ll tell you which one you’re looking at during a free estimate, and give you the free second opinion if you already have a written quote. Call (833) 762-8116.
A single hardware swap or door replacement is usually a short visit. Cabinet installation runs several days, and a full kitchen remodel typically takes a few weeks depending on scope and whether electrical or plumbing moves. We give you the schedule in writing before we start and update it in writing if anything shifts. Call (833) 762-8116 for a free estimate and a realistic timeline.
We start with your model or series label, the drawer box measurements, and photos of the hinge and slide – those three things are what confirm the correct spec. We don’t keep parts in stock or carry them on a truck, so we match the part to your exact model line and order it. If you’re working with KraftMaid, Cambria, or Silestone alongside your Mr-Glass cabinets, we handle those too. Call (833) 762-8116 to get the process started with a free estimate.
If your Mr-Glass kitchen has a failing part and you’re ready to know what it’ll cost to fix it right, call Barrett & Sons Construction Santa Clarita at (833) 762-8116 for a free estimate. You’ll get upfront pricing, a written scope, permits pulled where they’re required, and our 90-Day Done Right Promise on every job. Ask about our $40 Off Any Repair Over $200 offer, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.