Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Driveway & Pavers: The Santa Clarita Owner’s Guide
We install and repair American Standard-compatible driveway and paver systems in Santa Clarita, and a full paver driveway typically runs $7,000 – $18,000 installed. A concrete driveway replacement runs $4,500 – $12,000, and a simple reseal or re-sand sits between $250 – $700. Most Santa Clarita homeowners find us after a winter of noticing that the joints between pavers have gone soft, the base is settling unevenly, or the drive is holding standing water against the garage door after a storm. When the pavers are moving, the problem is almost never the pavers themselves. It’s what’s underneath them.

Barrett & Sons Construction Santa Clarita is an independent service provider, not affiliated with American Standard. We install their hardscape products and we work on them. Our crews have up to 28 years of experience with pavers, and we pull permits and sign inspections on every job where the city requires them.
Key Takeaways:
- Paver driveway installed cost in Santa Clarita: $7,000 – $18,000.
- Most paver failure in Santa Clarita traces to base prep and drainage, not the paver itself.
- Reseal and re-sand (the ongoing maintenance step) runs $250 – $700.
- We issue a written change order before any scope change on your job.
Which American Standard Models This Applies To
American Standard’s paver and hardscape line covers a range of unit styles: the classic rectangular concrete paver, permeable grid systems, and larger format slabs. The face style matters less than the base and the edge restraint, which is where the real compatibility questions live. If you’re matching new units to an existing American Standard drive, measure an in-place unit across its length and width to the nearest eighth inch, not just its nominal label. A 6×9 nominal paver is often 5 15/16 x 8 15/16 in the hand. Measure several from different parts of the drive; a settled or sun-exposed drive will have slightly different finished dimensions than the spec sheet.
You’ll usually find the product name and style stamped on the packaging of leftover stock, in the original installer’s paperwork, or embossed on the underside of a lifted unit. If you have any of those, bring them in when we look at your job. On the OEM-versus-aftermarket decision: American Standard sells a matched unit that keeps color and thickness consistent with what’s already on the drive, and that’s what we recommend when we’re matching an existing run. Aftermarket equivalents fit dimensionally but can differ in tone and thickness by a few thousandths, which shows up as lippage across the drive in a year or two. When we’re pulling up a whole drive, the choice opens up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Driveway & Pavers Is Failing
Here’s what we actually see when we walk a Santa Clarita driveway, and what each symptom usually means underneath:
- Sinking or dipping in one area, usually the apron or near the garage door. That’s base failure or soil washout, not a broken paver. Santa Clarita’s clay-heavy soil holds water and stays soft after rain, and if the base wasn’t compacted and drained correctly, the drive follows the soil down.
- Joint sand washing out every rainy season, or weeds sprouting in the joints. Fine sand that’s improperly compacted (or settled out) leaves the pavers sliding against each other and lets seed take hold. Re-sanding with polymeric sand is a real fix, but only if the base underneath is still solid.
- Lippage, where one paver sits proud of its neighbors. Some is expected over a long drive’s life. If it’s appearing in a concentrated run in one spot, the base under that run has settled.
- Standing water or puddling after storms. A paver drive needs positive slope to fall away from the house and off the drive. Flat or slightly back-sloped sections trap the water, and that trapped water is what accelerates the next failure.
- Edge units pushing out or the restraint pulling loose. The edge restraint holds the whole field together. When it fails, the pavers spread and open joints widen across the drive.
None of these is a paver problem. They’re all base, drainage, or edge problems that the paver above them is telling you about.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers break down on a Santa Clarita job. On a full paver driveway installation or replacement, most homeowners land between $7,000 and $18,000, and the range is driven by square footage, base depth required on your soil, the paver unit you choose, edging, and whether drainage work is needed. A concrete driveway replacement runs $4,500 – $12,000, an asphalt pour $3,500 – $9,000, and a reseal with new joint sand $250 – $700.
What drives you toward the top of a range here: deeper excavating on clay soil, drainage corrections, and hauling off old material. What keeps it low: a straight drive, good existing drainage, and a standard unit style. Every scope we write up is line-itemed, and any change during the job comes to you in a written change order before anyone touches it. Materials are named, and you’ll see your materials list before day one. Every completed driveway carries our 90-Day Done Right Promise, in writing.

DIY or Call Us?
Some driveway work is safe for a homeowner to check and even to do. Walking the drive after rain and marking where water pools is genuinely useful and costs nothing. Sweeping and re-sanding a few loose joints yourself is fine. Most driveway failures in Santa Clarita are more than one person and a wheelbarrow can handle, though. Pulling and re-setting pavers on a soft base means re-excavating, re-grading, and recompacting in lifts, and doing it on top of the failing base just buries the real problem. Base compaction in California clay drives is the step that gets skipped, and it’s the one that determines whether the drive lasts.
Re-sealing and re-sanding a whole drive can wait a few weeks without getting worse, but a drive settling toward the house or holding water against the garage wall should be looked at soon, before the water finds its way inside. Call (833) 762-8116 and we’ll come take a look, tell you what’s actually failing underneath, and give you an honest estimate.
FAQs
A correctly installed paver driveway built on a properly compacted, drained base will last 25 to 30 years or more here. The pavers themselves outlive the base under most drives, so the real age clock is on the base and drainage. Call (833) 762-8116 if yours is showing sinking or open joints and we’ll take a look.
Often, yes. If the failure is isolated to a section (a settled apron, a failed edge restraint, a drainage low spot), we can pull that area, rebuild the base correctly, and re-set the matching units. Whole-drive replacement makes sense when sinking and open joints are showing up across the field and the base is failing broadly. We’ll tell you honestly which one you’re looking at.
A typical residential paver driveway takes 3 to 5 working days once we start, depending on square footage, how much base the soil requires, and drainage work. Concrete runs a little faster. We don’t promise same-day driveways, because proper base prep and compaction can’t be rushed and still hold up.
We source American Standard hardscape through supplier channels and match your existing unit by style, color, and thickness so the repair blends. If you have the original installer’s paperwork or a leftover unit, bring it; it shortens the match significantly.
No change happens without your signature. Every scope, every allowance, and every price change is written on a change order and signed before any work moves forward. We don’t hand you a surprise invoice at the end.
Call (833) 762-8116 to schedule your free estimate. We’ll walk the drive with you, check the base and drainage, and tell you what’s actually failing. We also work with KraftMaid, Cambria, and Silestone on the inside of the house if a kitchen or bath project is coming up alongside the drive.
KraftMaid, Cambria, Silestone.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.