Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Home Additions & ADU: The Santa Clarita Owner’s Guide
We build Ameristar-compatible home additions and ADUs in Santa Clarita, and the installed range runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. An Ameristar addition doesn’t fail all at once; it announces itself one room at a time. You notice a hairline crack over the header where the old stucco meets the new. The bedroom over the addition stays two degrees cooler in January than the rest of the house. A window in the new wing won’t latch square anymore. Our crews have up to 28 years of experience reading those signals before they turn into a $20,000 problem.

Which Ameristar Models This Applies To
Ameristar refers to the manufactured components used in our addition work: prefabricated wall panels, roof truss systems, and modular ADU shells built to California code and finished on-site. Compatibility depends on three things: the shell series (light-gauge panel vs. structural truss), the tie-in method at the existing structure, and the foundation spec on your stamped plans. On Santa Clarita homeowners’ plans, we look for the structural stamp sheet and the panel schedule. Those two documents tell us the panel series, the truss spacing, and the load path – which is what determines whether a replacement component matches the original design or needs an engineered alternative.
Owners sometimes ask whether an Ameristar-compatible panel must come from the original manufacturer. It doesn’t have to. A California-licensed fabricator can build a matching panel to the stamped spec – same gauge, same anchoring schedule, same sheathing – and it passes the same inspection. OEM gives you a faster match to the original drawings. Aftermarket gives you flexibility when the original model line is discontinued, which happens more often in Santa Clarita than owners expect because our climate pushes the hardware harder.
Before assuming a specific part, measure the existing panel depth, check the truss spacing at the ridge, and locate the label plate on any modular section. That label is what we use to match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Home Additions & ADU Is Failing
- Vertical cracks over the addition’s header or corners. These usually trace to foundation settling or a compromised truss connector – the wood has moved, and the stucco followed.
- Interior doors that stick every spring. Santa Clarita’s dry summers and cooler winters push framing through seasonal movement; doors that stick every April and free up in July point to a moisture-related wood problem in the panel or the sill plate.
- Roof or wall leaks at the tie-in line. The seam between the original house and the new addition is the highest-stress joint on the structure; flashing failure there is the most common defect we find.
- Cold rooms over the addition in winter. Insulation compressed by settling, or a gap at the top plate, explains it every time.
- Windows that won’t latch or rack out of square. If the window was straight two years ago and won’t sit flush today, the panel it’s set in has moved.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the ranges we see across Santa Clarita jobs. Every quote is line-item.
| Scope | Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type, whether we’re tying into an existing roofline or building free, finishes (KraftMaid and Cambria if you want premium kitchen work in the ADU), and engineering requirements on the stamped plans. We quote parts and labor separately, in writing. Every price change gets a written change order before work starts. Permits are pulled and inspections signed on every eligible job. The 90-Day Done Right Promise is on the contract – if something we touched fails in 90 days, we come back.
DIY or Call Us?
An owner can safely check a few things: photograph the cracks over the header, note where the leak is showing on the ceiling, check the doors that stick, and pull the label plate off any modular component so we can identify the series. That’s it.

Where it goes wrong: anything load-bearing, anything at the roof tie-in, anything electrical. Cutting into a panel to inspect a truss connector, patching flashing yourself, or resealing a foundation crack without addressing the cause are jobs that create bigger failures and void your permit coverage. Structural work is not a weekend project.
For anything on the structural side, call (833) 762-8116. We’ll come look, and there’s no trip charge inside the county.
FAQs
Properly built and maintained, 50-plus years – but Santa Clarita’s dry heat and seasonal swings wear the tie-in line and the sill plate faster than the shell itself. Plan on inspecting the tie-in every five years and watching the sill plate for rot after wet winters.
Sometimes. Hairline cracks over a header, a single bad truss connector, or a compromised panel seam can often be repaired. Foundation failure or a rotted sill plate almost always means replacement of the affected section. We’ll tell you which one you have after we look – no upcharge for that diagnosis.
Panel or connector repairs often finish in one to three days on-site. Full addition rebuilds run six to twelve weeks depending on permits and inspection scheduling with the city. We schedule the permit review first, because that’s the piece we don’t control.
From California-licensed fabricators who build to the stamped spec, or from the original Ameristar model line when it’s still in production. We hand you the spec sheet for the part before we order it. You approve it in writing, and it goes on the change order.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.
Barrett & Sons Construction Santa Clarita is an independent service provider and is not affiliated with Ameristar. We also work with KraftMaid, Cambria, and Silestone. Call (833) 762-8116 to schedule your free estimate – a live person answers, day or night.