Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose Ameristar Construction
We provide independent Ameristar construction service in Santa Clarita: cabinet repair and refacing, full kitchen remodeling, backsplash work, and repair of Ameristar building products like roofing shingles and exterior trim. What sets our Ameristar work apart is that we know the specific box constructions, glide designs, and door-joint behavior of the Avondale, Bristol, and Jamestown lines, so we can tell you whether your kitchen needs a targeted fix or a full installation. We are not authorized, sponsored, or endorsed by Ameristar. We’re an independent provider, and we’ll say plainly when a repair makes sense and when it doesn’t. Call (833) 762-8116 for a free estimate.

Why Trust Barrett & Sons Construction Santa Clarita for Your Ameristar Construction?
Ameristar cabinets show up in a lot of Santa Clarita kitchens, and our crews have worked on enough of them to recognize a problem before we open a single drawer. Our technicians have up to 28 years of experience, and that time has been spent learning how each Ameristar line is actually built: the stapled particleboard boxes on the Avondale and Bristol lines, the nylon roller glides that wear out first, the hinge plates that strip their screw holes after years of daily use.
That matters for warranty safety. When we replace an Ameristar glide or hinge, we match the OEM part whenever it’s still available, because a mismatched aftermarket glide can stress the drawer box and void the coverage you still have. When OEM parts are discontinued, we use aftermarket soft-close units sized for the Ameristar box and tell you exactly what changed. Every eligible job includes permits pulled and inspections signed. Every scope and price change arrives as a written change order before work begins. And every completed job is backed by our written 90-Day Done Right Promise.
Santa Clarita cabinetry takes a beating that cabinet lines built for milder climates weren’t designed around. Valley summers push past 100°F, and that heat cycling is hard on painted shaker doors and wood panels alike. We plan repairs around it rather than pretending it isn’t happening.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Santa Clarita
These are the failures we see most often on Ameristar products in Santa Clarita homes, and what’s usually causing them:
- Worn drawer glides on Avondale and Bristol cabinets. The nylon rollers inside the glide assembly flatten and crack with age, so drawers start to sag, stick, or drop off their track. It’s a small part causing a big annoyance, and on a sound box it’s one of the cheapest fixes in the kitchen.
- Cracked stile-and-rail joints on Bristol painted shaker doors. Painted shaker doors move as the wood expands and contracts through Santa Clarita’s dry summers and cooler winters, and the paint film along the center panel and joint lines cracks first. Hairline cracks aren’t structural failure. They’re a sign the door needs gluing, clamping, and refinishing before the joint opens further.
- Uneven yellowing on Avondale oak uppers. Oak cabinets near windows darken and yellow unevenly when kitchen grease and UV light hit them together, and the uppers closest to a window go first. Refinishing can even the tone, but only if the finish underneath is still intact.
- Loosened hinges pulling out of particleboard. Ameristar hinges work loose at the screw holes over time, and once the particleboard around a hole crumbles, the door drops out of alignment and won’t stay adjusted. A hinge that just needs tightening is a five-minute fix. A stripped hole needs a proper repair, not a bigger screw.
- Swollen cabinet boxes after a leak or spill. Particleboard that has soaked up water swells and never goes back down. No hardware swap or reface fixes a swollen box, and we’ll tell you that honestly instead of selling you a reface that will fail in a year.
Ameristar Parts & Our Repair-vs-Replace Approach
Ameristar OEM hinges, drawer glides, and shelf clips are still available for most of the lines we see, and they’re the right choice when the cabinet box is square and dry. Matching the OEM part keeps your warranty intact and keeps the drawer geometry the way Ameristar designed it.
We don’t claim to stock Ameristar parts locally, because we don’t. We source the correct part for your specific line and box size, which sometimes means a short wait and always means the right fit instead of whatever’s on a shelf. When OEM parts are discontinued, an aftermarket soft-close glide is a solid upgrade, and we’ll tell you which is which.
The honest stance on repair versus replace: reface or repair Ameristar boxes that still have good joinery. Replace cabinets where the particleboard has swollen from moisture, because no hardware or veneer fixes that. If your boxes are sound and the doors are just showing their age, a targeted repair usually beats a full tear-out by a wide margin. Call (833) 762-8116 and we’ll walk your kitchen with you before you spend a dime.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We open every drawer and door on the Ameristar cabinets in question, check glide condition, test hinge screw holes for stripped particleboard, and inspect box corners for swelling. On Avondale oak, we check finish wear and yellowing under the kitchen lighting, not just in daylight.
- 2
Repair or install, in writing. You get a written scope with line-item pricing before anything is ordered: which glides, which hinges, which door repairs. If the job grows, the change order comes to you before work proceeds.
- 3
Test under load. Every repaired drawer gets loaded and cycled. Every door gets checked for alignment and swing. A cabinet that opens smooth empty can still bind once it’s full of pots.
- 4
Warranty and follow-up. Completed jobs carry our written 90-Day Done Right Promise. If a glide we installed fails or a door we repaired cracks again, one call brings us back.
An Ameristar Bristol shaker kitchen with painted doors often develops hairline cracks at the stile-and-rail joints along with a few drawers that stick on worn nylon glides. A qualified local pro typically pulls the affected doors, glues and clamps the joints, and replaces the glides with OEM or soft-close aftermarket units sized for the Ameristar box. If the boxes are square and dry, the fix is usually hardware and finish touch-up rather than full replacement.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Santa Clarita
We work on the Ameristar cabinetry lines common in Santa Clarita homes: the Avondale line with its raised-panel oak and maple doors, the Bristol line with shaker-style painted or stained doors, and the Jamestown line with flat-panel slab doors. We also repair and replace Ameristar building products, including roofing shingles and exterior trim, which matters more in this valley than most people realize. Santa Clarita’s dry Santa Ana winds and 100°F summers age exterior trim and roofing faster than coastal climates do, and fire-resistant roofing choices are a real priority in the wildland-urban interface neighborhoods. If you have an Ameristar product we haven’t named, call and ask.
We Also Service These Brands
We’re not a single-brand shop. Alongside Ameristar, we install and service KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures. That means when we tell you an Ameristar repair is the right call, it’s because it’s the right call, not because it’s the only brand we know. If a replacement makes more sense with a different line, we’ll say so.
FAQs – Ameristar Construction Service in Santa Clarita
Is Barrett & Sons Construction Santa Clarita authorized by Ameristar?
No. We are an independent Ameristar service provider, not authorized, sponsored, or endorsed by Ameristar. We work on Ameristar products as an independent contractor and source OEM-compatible parts for the repairs we make.
Do you use genuine Ameristar/OEM parts?
Yes, whenever they’re still available for your specific line. OEM hinges, glides, and shelf clips are the right choice for warranty safety. When a part is discontinued, we use quality aftermarket soft-close units sized for the Ameristar box and tell you exactly what we substituted.
How long does Ameristar service take?
Most targeted repairs, like replacing glides or re-gluing door joints, are done in a day once the correct parts arrive. Full cabinet installation or a kitchen remodel takes longer, and you’ll get a written timeline with your written scope before anything starts.
What Ameristar models/series do you cover?
We cover the Avondale (raised-panel oak and maple), Bristol (shaker-style painted or stained), and Jamestown (flat-panel slab) cabinetry lines, plus Ameristar building products like roofing shingles and exterior trim. If you’re not sure which line you have, call (833) 762-8116 and we’ll help you identify it.
Will service void my Ameristar warranty?
Not when it’s done right. Using OEM parts and correct installation practices keeps your coverage intact. Improper repairs, like oversized screws in stripped hinge holes or mismatched glides, can void it, which is one reason we document everything we change. Call (833) 762-8116 for a free estimate and a written scope.
How much does Ameristar construction cost in Santa Clarita?
Here’s what the work typically runs in this market:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Roof Repair | $400 – $1,800 |
A targeted glide or hinge repair sits well below the cabinet installation range, which is exactly why diagnosis matters before you commit to a number. Call (833) 762-8116 for an exact quote, estimates are free.
Book Your Ameristar Service in Santa Clarita, CA
Before you replace a kitchen you might only need to repair, get a straight answer from someone who knows the Ameristar lines by name. We’ll diagnose the actual failure, put the scope and pricing in writing, and tell you when a fix beats a replacement. Estimates are free, we pull permits and pass inspections on every eligible job, and our written 90-Day Done Right Promise backs the work. Call Barrett & Sons Construction Santa Clarita at (833) 762-8116.
Written by the team at Barrett & Sons Construction.