Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Santa Clarita Owner’s Guide
Barrette kitchen remodeling in Santa Clarita typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop square footage, and whether the layout changes. When a Barrette cabinet component fails – a soft-close hinge that won’t hold, a drawer glide that grinds, a door that sags off its hinge plate – the fix is usually a matched part swap, not a full cabinet replacement. Most owners find out the morning a door hangs crooked or a drawer stops closing flush, and they start hunting for the exact hinge or glide that matches their cabinet line.

Which Barrette Models This Applies To
Barrette cabinet hardware and door systems vary by product line, and the hinge or glide that fits one series often won’t fit another. The fastest way to identify what you have is to pull one hinge off a door and read the stamped model number on the plate, or measure the hinge cup bore (most Barrette European-style hinges use a 35mm cup) and the door overlay. Drawer glides are trickier: undermount soft-close glides are sized by cabinet depth and drawer box width, and a glide from a different line will bolt up but won’t track right.
Barrette’s OEM parts are the safest match, but quality aftermarket equivalents exist for common hinge patterns and cost less. The gotcha is that aftermarket glides rated for the same load often have a different mounting hole pattern, which means new screw holes in the cabinet side. On a Santa Clarita kitchen with original Barrette boxes, that’s usually fine, but it’s worth knowing before you drill. We install Barrette-compatible components, KraftMaid, Cambria, and Silestone, and we’re an independent service provider – not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
These are the failures we see most in Santa Clarita kitchens, and what’s actually behind each one:
- Doors that won’t stay closed or drift open. The soft-close hinge spring has lost tension or the adjustment screw has backed out. Barrette hinges are adjustable in three directions, and a five-minute re-tension often buys another year.
- Drawers that grind or won’t close flush. Undermount glide clips wear out or the glide rail has bent from an overloaded drawer. Once the clip tabs snap, the drawer box drops and rubs the cabinet face.
- Sagging door corners. The hinge plate screws have stripped out of the cabinet side, common in particleboard boxes after years of Santa Clarita’s dry summer air cycling the wood.
- Drawer fronts that pull loose. The mounting screws into the drawer box have stripped. This is a screw and glue fix, not a glide replacement.
- Soft-close that slams. The dampener piston has failed or gummed up. On Barrette glides the dampener is often a separate replaceable clip, which is cheaper than a whole glide.
Replacement Cost & What’s Included
A single hinge or glide swap in Santa Clarita runs $40 – $120 in labor when it’s a one-off, and we waive the trip charge inside the county. Full Barrette kitchen remodeling, when the failure is widespread or you’re ready to update, lands in these ranges:
- Kitchen remodel (full): $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: cabinet line and box count, countertop material and square footage, whether plumbing or electrical moves, and whether the layout changes. Every scope, allowance, and price change arrives as a written change order before work happens. The installed work is backed by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a hinge by tightening the adjustment screws, and you can swap a soft-close dampener clip if you can identify the exact part number. Where DIY goes wrong on Barrette cabinets is drilling new glide holes in the wrong spot, over-tightening hinge plates into particleboard until the screws strip, or buying an aftermarket glide that bolts up but won’t track. Cabinet parts aren’t dangerous the way a garage door spring is, but a mis-drilled cabinet side is expensive to undo. If you’re not sure which Barrette line you have, call us at (833) 762-8116 and we’ll help you identify the part before you order anything.
FAQs
Barrette soft-close hinges typically hold up 10 – 15 years under normal use, and undermount glides 8 – 12 years. In Santa Clarita’s dry inland climate, the seasonal wood movement speeds up hinge-plate loosening, so we often see screws strip a few years earlier than in coastal homes. Call (833) 762-8116 for an exact quote – estimates are free.
Yes, often. Re-tensioning the hinge adjustment screws or replacing just the soft-close dampener clip brings many Barrette hinges back to full function for a fraction of a full swap. If the hinge plate screws have stripped the cabinet side, that’s a repair too – we fill and re-set them rather than replace the door. Call (833) 762-8116 to schedule a free estimate.
A single hinge or glide swap takes 15 – 30 minutes; a full kitchen’s worth of hardware takes a half day to a full day depending on cabinet count. We bring the correct part for your line so there’s no return trip. Call (833) 762-8116 – estimates are free.
We identify your cabinet line from the hinge plate stamp or door measurements, then source the OEM part or a verified aftermarket equivalent that matches the bore and overlay. You’ll see the part spec in writing before we order. Call (833) 762-8116 for a free estimate.
Why Santa Clarita Owners Call Barrett & Sons
Barrett & Sons Construction has been owner-operated since 1998, and Tom Barrett’s sons run the crews – no franchise dispatching strangers to your kitchen. Every eligible job gets permits pulled and inspections signed, every price change is a written change order before work starts, and every completed job carries the 90-Day Done Right Promise. Our technicians have up to 28 years of experience. We publish Tom’s name, address, and license number so you can look it up before you sign anything, and a live person answers the phone 24 hours a day. Standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. If a Barrette cabinet part in your Santa Clarita kitchen has failed, we’ll match it, price it honestly, and stand behind the work.
Call (833) 762-8116 to schedule your free estimate on Barrette kitchen remodeling or a parts swap in Santa Clarita and nearby areas.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.