Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Santa Clarita Owner’s Guide
We install and repair Boral driveway and paver systems across Santa Clarita, and a typical paver driveway runs $7,000 – $18,000 installed, with repairs and re-laying priced far lower. Boral is a real brand with real specs, so the work starts with matching the product, not guessing. Most Santa Clarita owners find out something is wrong the same way: a paver rocks underfoot after a rain, sand washes out between joints, or a section of drive near the garage apron shifts and the whole line goes out of joint. We’re an independent contractor and not affiliated with Boral, but we know their product lines and how they hold up in our heat and clay soil. Call (833) 762-8116 for a free estimate.

Which Boral Models This Applies To
Boral’s hardscape catalog is broad, and what you have matters for how we repair it. The most common lines you’ll run into on a Santa Clarita driveway are the concrete paver series (including the older and the current profile lines), Boral’s stone and brick paver options, and their segmental retaining wall blocks where a driveway meets a slope. The company has changed some series names and molds over the years, so a paver pulled from a 2009 install may not match today’s catalog exactly.
To identify what you have, pull one loose or cracked paver and check the underside or edge for a mold mark, series stamp, or color code. Measure it: length, width, thickness, and the joint spacing. Boral pavers commonly run in the 2 3/8-inch to 3 1/8-inch thickness range for driveways, and driveway-rated product is thicker than what goes on a walkway. That thickness is the number that matters. An OEM replacement from the same series gives you the exact color and dimension; a quality aftermarket paver can work for a repair if the thickness and color are close, but dye lots drift and a patch will read as a patch. For a full replacement, matching the brand and series keeps the whole drive consistent. We’ll tell you straight which path makes sense for your Boral job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
Pavers are tough, but they fail in predictable ways, and each symptom points to a different cause:
- Pavers rocking or wobbling underfoot. The bedding sand or base has shifted or settled. In Santa Clarita, our shrink-swell clay soil and summer heat move a lot, and a thin base gives way first.
- Sand washing out of the joints. Water is getting under the pavers instead of running off. That usually means the slope or drainage has changed, or joint sand wasn’t topped off after the last rainy season.
- Sunken or heaved sections. Base failure or a tree root pushing up from below. One low spot near the garage apron is the classic early warning.
- Cracked or chipped pavers. Point loads from a heavy vehicle, a dropped trailer tongue, or freeze-thaw cycling in the high-desert edges of the valley. Cracks in a cluster often mean the base beneath is failing, not just the paver.
- Efflorescence (white chalky film) that keeps coming back. Moisture moving through the paver and salts surfacing. It’s cosmetic at first, but recurring blooms can signal water trapped under the field.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Boral paver work runs in Santa Clarita, installed:
| Job | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The range depends on square footage, whether the base needs rebuilding or just re-sanding, paver series and thickness, and how much cutting the layout needs around curves and the garage apron. We price parts and labor as separate line items so you can see what the product costs versus the work. Every price change comes to you as a written change order before we touch the job. The finished work is backed by our written 90-Day Done Right Promise: if something’s not right, one call brings us back.
DIY or Call Us?
Some things you can check yourself safely. Walk the drive and mark the rocking pavers with chalk. Sweep a hose over it and watch where water pools. Look for the low spot near the apron. Re-sanding joints is a reasonable weekend job if the base is sound.
Where DIY goes wrong is the base. Lifting pavers to fix a sunken section without rebuilding the compacted base underneath just moves the problem a few months down the road, and on our clay soil it comes back fast. A driveway that’s shifting in several places usually needs the base and drainage evaluated, not a fresh layer of sand. That’s judgment work, and it’s where a trained crew earns its keep. If your Boral drive has more than one or two trouble spots, call us at (833) 762-8116 for a free estimate before you dig anything up.
FAQs
Twenty to thirty years or more when the base is built right and joints are kept full. The pavers themselves outlast the installation; it’s the base and joint sand that fail first in our heat and clay soil. Keeping joints topped up and resealing every few years gets you the long end of that range. Call (833) 762-8116 for a free assessment of your drive.
Often, yes. A handful of rocking or cracked pavers can be pulled, the base re-compacted, and new matching pavers set in place. If the failure is spread across the whole drive or the base is gone, a partial repair won’t hold and replacement makes more sense. We’ll tell you which one your drive actually needs. Call (833) 762-8116 for a free second opinion.
A small repair is usually a day. A full paver driveway install typically runs several days to a couple of weeks depending on square footage, base work, and weather. We give you a written schedule up front so you know what to expect. Call (833) 762-8116 to get your project on the calendar.
We identify your paver by series, mold mark, dimensions, and thickness, then source from Boral’s current catalogs and supplier channels to get the closest match. Older series sometimes can’t be matched exactly, and we’ll tell you that before you commit rather than after. Color and dye-lot differences are flagged up front. Call (833) 762-8116 to start with a free estimate.
If your Boral driveway is rocking, washing out, or due for a full replacement, we’ll walk it with you, put the scope and the price in writing, and pull the permits where they’re needed. We install Boral hardscape alongside brands like Belgard and Techo-Bloc, and we work with KraftMaid, Cambria, and Silestone on the interior side when a project runs inside too. Call (833) 762-8116 for a free estimate on your Santa Clarita driveway or paver project.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.