A Barrett company - serving Santa Clarita, CA

Boral Windows & Doors in Santa Clarita, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Santa Clarita Owner’s Guide

We replace and repair Boral windows and doors across Santa Clarita, and most of those jobs land between $4,500 and $15,000 for a full window replacement and $8,000 to $25,000 when impact-rated units are involved. A single failed sash, hinge set, or balance arm usually runs far less and is typically a scheduled repair, not a same-day emergency. Most Santa Clarita owners discover the problem the same way: a window that won’t stay up, a door that drags on the threshold in August, or fog between the panes that showed up after a hot week in Newhall. By the time you notice, the part has usually been failing for a season.

Professional roofing team removing shingles into a dumpster using a chute in Santa Clarita, CA

Call (833) 762-8116

A quick word on who we are: Barrett & Sons Construction Santa Clarita is an independent service provider and is not affiliated with Boral. We work on Boral products because they’re common in this valley and we know the parts.

Key Takeaways

  • Most Boral window and door repairs in Santa Clarita fall under $1,000 in labor and parts; full replacement runs $4,500 – $15,000.
  • The part that fails first is almost always the balance or hinge assembly, not the glass.
  • Model number is stamped on the sash edge or the door jamb label. Bring it to the estimate.
  • Impact-rated swaps run $8,000 – $25,000 and need permit sign-off.

Which Boral Models This Applies To

Boral’s residential window line includes vinyl new-construction and replacement series, and their door line covers patio sliders and hinged entry doors. The compatibility gotcha most owners miss: Boral has used more than one balance and hinge platform across its vinyl series, and the parts are not interchangeable between them. A balance stamped for one series will fit the channel but ride at the wrong tension, and you’ll be back to a sash that slams shut within a month.

To identify your part, look in three places, in this order:

  • Sash edge or top rail – the model/series label is often a small sticker that peels off in heat.
  • Door jamb or hinge-side stile – Boral stamps the door series and handing here.
  • The original glass etch – the corner code tells you the unit’s rating even when the label is gone.

If the label is missing, measure the visible glass and the frame opening to the sixteenth of an inch and photograph the balance channel or hinge. That’s usually enough to match the series. On OEM versus aftermarket: for Boral, we source OEM when the part carries the sash weight (balances, tilt latches, hinge sets) and a quality aftermarket equivalent when it’s a gasket, weatherstrip, or screen frame where the spec is universal. We don’t stock parts and nothing rides on a truck – each part is ordered to your model, which is why the model number matters so much.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

  • The sash won’t stay open. The balance has lost tension or the spiral rod has snapped. This is the single most common Boral window failure we see in Santa Clarita.
  • Fogging or condensation between the panes. The sealed glass unit has lost its seal. In Santa Clarita’s dry heat and big day-to-night temperature swings, a failed seal shows up fast – often within a few summers.
  • The door drags or won’t latch. The hinge has worn or the frame has shifted. Sliders on a south-facing wall are especially prone because the track expands in the heat.
  • Drafts or water at the sill. Weatherstrip or sill gasket has flattened and cracked. This one gets worse quietly until the first big rain finds it.
  • Loose or cracked tilt latch. The plastic latch on tilt-in sashes gets brittle in the CA sun. A cracked latch is a security and fall risk on an upper floor.

Replacement Cost & What’s Included

Here’s how Boral window and door work prices out in Santa Clarita, parts and labor together:

Job Installed Range
Single failed balance or hinge repair Usually under $1,000
Window replacement (whole-house or major portion) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the range: number of openings, whether it’s a like-for-like sash swap or a full unit replacement, impact versus standard glass, and whether the rough opening needs work. We write the part, the labor, and any allowance into the scope before we start. If a hidden problem turns up once the old unit is out, you get a written change order before anything else moves. Every job carries our written 90-Day Done Right Promise, and we pull permits on every eligible job.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things you can check safely yourself: whether the sash label is readable, whether the balance channel is bent, whether the door hinge screws are stripped. Take photos. That information helps us match the part.

Where DIY goes wrong on Boral windows and doors is the swap itself. A window sash or patio door panel under tension is heavy and unforgiving, and an upper-floor window is a genuine fall hazard. The balances are coiled under load, and they can release hard if the sash isn’t held correctly. Hinges on a patio door carry the whole panel weight. This is work for someone with the right tools and a second set of hands – not a Saturday project with a ladder and good intentions. If you’re not sure which part failed, call (833) 762-8116 and describe what it’s doing. A live person answers, day or night.

FAQs

Ready to Get Your Boral Windows and Doors Fixed Right?

If your Boral window or door is failing, the fix starts with a free estimate. We’ll identify the model, tell you whether it’s a part or a full unit, and put the price in writing before we order anything. Barrett & Sons Construction Santa Clarita also installs KraftMaid, Cambria, and Silestone in kitchens and baths. We pull permits, write every change order before the work moves, and back it all with the 90-Day Done Right Promise. Call (833) 762-8116 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch