Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Santa Clarita Owner’s Guide
A CGI bathroom remodel in Santa Clarita typically runs $9,000 to $28,000 installed, depending on whether you’re working with a builder-grade hall bath in Canyon Country or a primary suite in Valencia that needs a full tile shower and a new vanity. We work with CGI-compatible fixtures across their product lines, and we don’t outsource the rough-in. If your CGI bathroom is giving you trouble right now – a leaking shower pan, a vanity that’s pulling away from the wall, a tub surround that’s cracked at the drain – here’s what it will take to make it right.

Most Santa Clarita homeowners don’t go looking for bathroom remodeling advice until something gives. The shower starts weeping around the drain flange. The tile on the tub deck sounds hollow when you step out. The vanity drawers stick after a wet winter, or the caulk at the tub-to-floor joint opens up for the third time. That’s usually when the calls start.
Which CGI Models This Applies To
CGI makes a wide range of bathroom fixtures, and matching the right replacement part to the right unit comes down to a label and a measurement. On most CGI shower pans and tub surrounds, you’ll find an identification sticker on the underside of the pan or the back edge of the surround – it lists the model series and a production date. On CGI vanities, the model number is stapled to the inside of the cabinet box behind the door hinge.
What most people get wrong: CGI’s shower pans come in specific dimensional families, and a 60-inch pan from one series won’t drop into the curb and drain location of another. Measure the pan at the curb, at the drain center, and along the back wall to the nearest eighth of an inch. Mismatch by a half-inch and you’re pulling back the tile you just set.
On the OEM-versus-aftermarket question, CGI replacement parts are generally worth the extra for drain assemblies, valve cartridges, and pan rough-in components. For cosmetic parts like escutcheons, trim kits, and vanity hardware, quality aftermarket equivalents work fine and cost less. We order both – tell us the model number and we’ll pull the correct part. Barrett & Sons Construction Santa Clarita is an independent contractor, not affiliated with CGI.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
- Shower pan cracks at the drain or curb. This is the most common CGI shower pan failure we see, and in Santa Clarita’s dry climate, the pan gets stressed by seasonal expansion and contraction. If water is leaking below the pan, the subfloor is already getting wet.
- Tile coming loose on a tub surround or shower wall. Usually the backer board failed or the thinset lost bond because moisture got behind the tile. Once one tile pops, others nearby are on the same failing substrate.
- Vanity door sag and drawer problems. On CGI vanities, the hinge plates work loose when the cabinet box takes on moisture. Sticking or sagging drawers usually mean the box is swelling, not just that the slide failed.
- Caulk joints opening repeatedly at tub or floor. That’s a sign the joint is moving, not a caulk problem. Reapplying caulk over a moving joint will fail again within a season.
- Drain or valve leaks on CGI shower fixtures. If the valve cartridge is dripping behind the wall, it’s a rough-in issue that needs the wall opened – not a cosmetic fix.
Replacement Cost & What’s Included
Installed bathroom remodeling in Santa Clarita runs $9,000 to $28,000, and here’s what drives it:
| Scope | Typical Installed Range |
|---|---|
| Full bathroom remodel (moderate scope) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: tile selection and square footage, whether the pan or rough-in is rebuild from subfloor up, whether the wall behind the tile needs replacing, and fixture brand. Parts and labor are quoted separately on every written estimate. Every price change comes to you in writing before work starts. The work is backed by our 90-Day Done Right Promise on every job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely check the model label on your CGI unit, measure the pan, reset a sticking vanity drawer, and re-caulk a joint that’s genuinely still. But there’s a line. A leaking shower pan or a leaking valve cartridge behind the wall is not a DIY job. Water damage to the subfloor and framing is expensive, and a rough-in mistake will cost more to fix than doing it right the first time. There’s no step-by-step we’ll give you for the shower pan swap – that’s the kind of work that needs to be done with the right tools and the wall open.
If you’re not sure whether your issue is cosmetic or structural, call us. We’ll tell you straight. Call (833) 762-8116 and we’ll get someone out. Estimates are free.
FAQs
A properly installed CGI bathroom that’s kept caulked and ventilated will last 15 to 25 years on the tile and fixtures under Santa Clarita’s climate. The variables are ventilation and whether the pan was set on a properly prepared substrate – do those right and the system lasts; skip them and you’ll be back in five.
Sometimes. Small surface cracks can be repaired with a specialized patch kit, but if the pan is cracked at the drain or the curb, or if water has gotten below it, replacement is the only fix that stops the leak. Call (833) 762-8116 and we’ll take a look and tell you which one you have.
Plan on 2 to 4 days for a shower replacement once the right CGI-compatible pan and surround are on site. Ordering the correct parts takes 5 to 10 business days depending on the model. We don’t start demolition until everything is in hand.
We order directly from CGI’s parts system using the model number and production date from your unit’s label. If a part is discontinued, we identify the correct current-series equivalent so it fits your existing rough-in. Bring us the sticker off the pan or the vanity box and we’ll do the rest.
Get a Straight Price on Your CGI Bathroom Remodel
We’re a Santa Clarita contractor you can look up, not a call center. Every scope, every allowance, and every price change is written down before we touch a thing – because an allowance that isn’t on paper is a surprise waiting for a date. Permits get pulled and inspected on eligible jobs, and our crews are brought in by Tom’s sons, not a dispatch system. We also install and service KraftMaid, Cambria, and Silestone products.
Call (833) 762-8116 for a free estimate. A live person answers, day or night. Ask about our $40 Off Any Repair Over $200, our Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.