A Barrett company - serving Santa Clarita, CA

CGI Construction Service in Santa Clarita, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Clarita Homeowners Choose CGI Construction

Barrett & Sons Construction provides independent CGI construction service in Santa Clarita, installing and repairing the full range of CGI cabinetry, countertops, and standing seam metal roofing found in local homes. We are not affiliated with, sponsored by, or authorized by CGI; we’re an independent contractor whose crews have worked on these products across the Santa Clarita Valley. What sets our CGI work apart is that we match OEM parts to your existing product lines, keep every scope and price change in writing, and pull permits on every eligible job.

Two construction workers framing a wall for a bathroom remodeling project. in Santa Clarita, CA

Call (833) 762-8116

What Santa Clarita’s Market Means for CGI Work

Santa Clarita was built in layers, most of it master-planned from the 1960s through the 2000s. Valencia, Canyon Country, Saugus, and Newhall all carry HOA architectural review boards that dictate roof tile color, setback dimensions, and exterior finish choices before a city inspector ever sees a plan. That layered approval process is something contractors from neighboring Lancaster or Palmdale rarely face, and it shapes how we handle every CGI metal roof or exterior cabinetry install in Santa Clarita. A standing seam roof color that clears a city permit can still stall at the HOA desk. We plan for both.

Call (833) 762-8116 to schedule your free estimate. A live person answers, day or night.

Why Trust Barrett & Sons Construction Santa Clarita for Your CGI Construction?

Our crews know CGI products because they’ve worked on them, not because they read a spec sheet. That means we know where a Bellingham thermofoil door fails first, how a Cortland soft-close glide behaves after eight years of daily use, and what a StoneMark quartz edge chip actually looks like before you decide whether to repair or replace. Our technicians have up to 28 years of experience, and most of that now runs through Santa Clarita’s tract homes from the 1970s through the 1990s, where original cabinet runs and aging tile roofs are reaching the end of their service life.

We source OEM-compatible CGI replacement doors, drawer fronts, and hardware where they’re available, and we’ll tell you plainly when they aren’t. Every scope is written down before work starts, every price change arrives as a written change order before a nail moves, and every completed job is backed by our 90-Day Done Right Promise. If it’s not right, you make one call. Tom comes back. And every eligible CGI install gets permits pulled and inspections signed, because the permit inspector works for you, not for us.

Tom publishes his name, his address, and his license number. Look them up before you sign anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in Santa Clarita

CGI products hold up well when they’re installed correctly and maintained in the conditions they were built for. Santa Clarita’s high-desert climate and heavy daily kitchen use are the two things that wear on them fastest. Here’s what we see most:

  • Thermofoil delamination on CGI Bellingham cabinet doors. The failure clusters near the dishwasher and under the sink, where heat and steam break down the adhesive backing a thermofoil door is bonded with. Once the film lifts at an edge, moisture gets behind it and the peeling spreads. This is the single most common CGI cabinet complaint we hear in Santa Clarita homes built in the 1990s.
  • Soft-close drawer glides losing dampening on Cortland cabinets. After years of daily use, the dampening mechanism in a soft-close glide wears out or fails to catch, and drawers slam instead of easing shut. The cabinet box is usually fine. The glide is the part that retires.
  • Painted or stained finish chipping at corners and around pulls. Cabinet doors take repeated impact at their corners and at the pull location. When the finish chips through, the substrate underneath is exposed and starts to swell or discolor if it gets wet. Small chips are worth addressing early, before they turn into a door replacement.
  • Fastener back-out and sealant failure at standing seam metal roof penetrations. Metal roof panels expand and contract with Santa Clarita’s temperature swings, and fasteners at penetrations and panel laps can back out over time. Sealant at those points dries and cracks. Both are catchable on a routine roof inspection before they turn into a leak.
  • Quartz edge chips and seam failure on CGI StoneMark countertops. Quartz is tough but not chip-proof. A dropped pan at a sink edge, or a seam that opened when the cabinet run shifted slightly, shows up as a hairline crack or a rough edge. These are repairable in most cases with a color-matched epoxy fill.

CGI Parts & Our Repair-vs-Replace Approach

For CGI cabinets, genuine OEM replacement doors, drawer fronts, and hardware are the right call when they’re available. OEM parts match the door profile, the finish color, and the hinge boring pattern, which means a single damaged door can blend into a run that’s fifteen years old. Where OEM parts aren’t available or the lead time is prohibitive, quality aftermarket hinges and glides from brands we trust can extend the life of a cabinet for years without changing the look of the door face.

The repair-versus-replace decision comes down to the boxes. If the cabinet boxes are solid and the damage is limited to one or two doors or a run of drawer glides, a targeted repair is almost always worth it. If water damage or delamination has spread across multiple runs of cabinetry, full replacement is the more honest recommendation, and we’ll tell you that plainly. We don’t claim to stock CGI parts locally; we source what each job actually needs and tell you the lead time before you commit. Call (833) 762-8116 for a free second opinion on any written estimate you’re holding.

Our CGI Service Process – Step by Step

  1. 1
    Diagnosis. We see the actual product in your home, not a photo. For cabinets, that means opening doors, checking boxes for swelling, testing glide function, and confirming the door series. For a metal roof, it means walking the panels, checking fasteners and sealant, and looking for panel deflection.
  2. 2
    Repair or install. Once we know what we’re dealing with, we write the scope down. Every allowance, every line item, every brand name in writing. If a CGI door needs to be replaced with an OEM part, that part number and its lead time are on the estimate. If the HOA needs to approve a roof color or exterior finish, that approval happens before we touch the house.
  3. 3
    Test. Cabinets get opened and closed across the full glide range, checked for door alignment and reveal. Countertops get measured for level. Metal roof panels get walked again after installation or repair, with fasteners checked and sealant inspected at every penetration and lap.
  4. 4
    Warranty and 90-Day Done Right Promise. Every completed CGI job carries the written 90-Day Done Right Promise. If a repair fails or an install isn’t right, you make one call and Tom comes back to fix it. The promise is written on the contract, not buried in fine print.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Products We Service & Install in Santa Clarita

We service and install the CGI product lines most common in Santa Clarita homes. That includes the CGI Cortland cabinet collection, in both shaker and flat-panel door styles, which is the line you’ll find in a lot of Valencia and Saugus kitchens built in the 1980s and 1990s. The CGI Bellingham cabinetry series, with its thermofoil and painted finishes, comes next, along with CGI StoneMark quartz countertops and CGI standing seam metal roofing panels. Cabinet installation and refacing, quartz and granite countertop work, and standing seam metal roof repair round out our CGI sub-services. If you’re not sure which series you have, send a photo or call us and we’ll help you identify it before the estimate.

We Also Service These Brands

Barrett & Sons isn’t a single-brand shop. If your kitchen has KraftMaid cabinets next to a CGI StoneMark counter, or a Cambria island alongside Silestone perimeter counters and Kohler fixtures, we service all of it. Premium-brand depth means we match materials by what’s actually in your home, not by what a single manufacturer sells.

FAQs – CGI Construction Service in Santa Clarita

Service Typical Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000
Small Kitchen Remodel $9,000 – $20,000
Metal Roof Installation $15,000 – $40,000
Roof Repair $400 – $1,800

Call (833) 762-8116 for an exact quote. Estimates are free.

Book Your CGI Service in Santa Clarita, CA

If you have a CGI Bellingham cabinet peeling near the dishwasher, a Cortland glide that’s lost its dampening, or a standing seam roof that needs a closer look, call (833) 762-8116. We’ll schedule a free estimate, put every scope and price change in writing, pull permits on every eligible job, and back the work with our 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Santa Clarita.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch