Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Santa Clarita Owner’s Guide
We handle Dvele home additions and ADU work in Santa Clarita, and installed costs for the addition and ADU scope we see most often run $45,000 – $130,000, with dedicated ADU builds running $90,000 – $220,000 and garage conversions at $30,000 – $80,000. We are an independent service provider and are not affiliated with Dvele.

Owners usually find us after the first walkthrough uncovers a real problem: a factory panel-to-site connection that never got properly flashed, a module-to-module seal on a Santa Clarita roof that started weeping after a winter rain cycle, or a mechanical chase where the factory routing doesn’t line up with the site utility stub. On a modular Dvele addition, the failures show up in the seams, the flashing, and the utility tie-ins, not in the box itself. That’s where the money and the mess live, and it’s where a qualified crew makes the difference.
Key Takeaways
- Dvele modular additions require site-specific flashing, sealing, and utility rough-in work that factory drawings don’t fully cover
- Installed addition and ADU scopes typically run $45,000 – $130,000 in the Santa Clarita market
- Every eligible job needs Santa Clarita building permits pulled and inspections signed – we do that
- Every scope change gets a written change order before work moves
Which Dvele Models This Applies To
Dvele builds modular and panelized home product lines, and the scope of site work varies by configuration: single-story additions, two-story additions, detached ADUs, and garage conversions each have different foundation, roofing connection, and utility-entry requirements. When we scope a Dvele job in Santa Clarita, we work from the actual panel schedule and factory drawings that ship with the product, not from a generic addition sketch.
The compatibility gotcha most owners miss: Dvele factory modules are engineered to a specific foundation and utility penetration layout, and the site contractor’s work has to match that layout – not approximate it. If your foundation was poured or your utility stubs set before the Dvele drawings were finalized, you can end up with mismatched penetration points and a chase routing problem that costs real money to correct. We verify that alignment before framing starts.
On the materials side, Dvele’s factory assembly includes specified roofing, cladding, and window product. Where a match or upgrade is needed, we source through premium lines – Andersen and Marvin on windows, GAF and CertainTeed on roofing – so you can look up exactly what’s going on your home. Nothing off a mystery van.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
Modular additions in Santa Clarita’s climate fail in predictable places. Here’s what we actually see:
- Water intrusion at module-to-module seams. The factory seal between Dvele panels relies on gaskets and sealant that can degrade under Santa Clarita’s hot summer-to-cool-winter cycling; when the seal fails, water tracks into the wall cavity before you see a stain inside.
- Failed flashing at the roof-to-addition connection. Where the new roof meets the existing house, improper step flashing or a missing kick-out is a leading cause of drywall damage within the first few Santa Clarita rainy seasons.
- Foundation settling at the module bearing points. Dvele modules concentrate loads at specific bearing locations; if the site foundation wasn’t engineered or compacted correctly for Santa Clarita’s expansive clay soils, you’ll see cracks at the module joint and door frames that stop latching.
- Utility chase misalignment. Plumbing and electrical stubs that don’t line up with the factory chase routing create kinked lines, inaccessible shutoffs, and inspection failures.
- Condensation and air infiltration at penetrations. Improperly sealed penetrations let Santa Clarita’s hot, dry air pull moisture through the wall assembly, which shows up as musty odors and higher energy bills.
Replacement Cost & What’s Included
Here’s how addition and ADU work prices out in the Santa Clarita market right now:
| Scope | Installed Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: foundation and site work, utility extension distance, whether permits and inspections are needed (they almost always are in Santa Clarita), and finish level. A garage conversion to an ADU is at the low end because the shell exists; a detached ADU with a new foundation and full utility run is at the high end.
Our quotes are written line-item. Every scope, every allowance, and every price change appears on paper before a nail moves – the allowance that isn’t on paper is a surprise waiting for a date. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise: if it’s not done right, one call brings us back.
Standing offers we keep: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside Santa Clarita County, and a permanent 10% Senior & Veteran discount.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Be honest with yourself about where the line is. A homeowner can safely check for visible water staining at seams, note doors that have stopped latching, and look for gaps in exterior flashing. That’s inspection, and it’s useful information to hand a contractor.
What a homeowner should not do: open up sealed roof-to-wall junctions, re-flash a modular roof connection, cut into the factory chase to reroute utilities, or re-engineer foundation bearing. Those are the places where DIY goes wrong – and on modular additions the failures compound quietly until a small flashing problem becomes structural. The permit inspector works for you, not for us, and a proper inspection trail protects the value of your Santa Clarita home.
Call us at (833) 762-8116 and we’ll tell you straight what needs doing.
FAQs
A properly built Dvele modular addition with correct site flashing, sealing, and foundation work should give decades of service. The factory assembly holds up well; the lifespan question is really about the site work at the seams, roof connection, and utility penetrations. In Santa Clarita’s climate, that means checking the flashing and seals after every wet winter. Call (833) 762-8116 for a free assessment of your specific setup.
Often yes – many Dvele addition issues are flashing and sealing failures, not full-system failures. A roof-to-addition connection that’s leaking can typically be re-flashed and re-sealed without touching the module assembly. Foundation and bearing problems are usually repairable with underpinning or drainage correction. We’ll give you a written line-item diagnosis before recommending anything. Call (833) 762-8116 for a free second opinion on any written estimate you already have.
A flashing or sealing repair can be completed in a few days. A garage conversion to ADU runs weeks to a couple months depending on utilities and finishes, and a full detached ADU build runs several months. Santa Clarita permit and inspection timelines factor in. We give you a written schedule with the scope, and every change to that scope comes as a written change order first. Call (833) 762-8116 to talk through your timeline.
We work from the Dvele drawings and panel schedule that come with your product, then source matching roofing, cladding, windows, and flashing through premium brands – Andersen and Marvin on windows, GAF and CertainTeed on roofing – and through suppliers who can verify the spec. For kitchens and baths inside a Dvele ADU or addition, we can also bring in KraftMaid, Cambria, and Silestone. Call (833) 762-8116 and we’ll walk through what your particular Dvele model needs.
Talk to Us Before You Sign Anything
Ask anyone on your street – or look up the license number yourself. We’re owner-operated, we pull every permit, and we put every price change in writing before work starts. Call (833) 762-8116 for a free estimate on your Dvele home addition or ADU in Santa Clarita.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.