Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Construction in Malibu, CA | Barrett & Sons Construction Santa Clarita
We provide independent GAF service across Malibu, and the one thing that sets our work apart here is that we build for two threats at once: salt-laden marine air that eats fasteners, and Very High Fire Hazard Severity Zone rules that demand ember-resistant everything. A GAF roof in Malibu has to pass both tests, and most crews only plan for one. We’re Barrett & Sons Construction Santa Clarita, an independent GAF installer, not factory reps and not tied to the manufacturer. We install and repair GAF systems to spec and to local code. Call (833) 762-8116 for a free estimate.

Why Malibu Residents Choose Us for GAF Service
GAF is the most common shingle brand on Malibu roofs, so when yours fails, you want a crew that already knows the product line inside and out. Timberline HDZ, Timberline UHDZ, Grand Sequoia, Liberty SBS self-adhered roofing – we’ve pulled, nailed, and repaired all of them across this coastline. We stay current with GAF installation requirements and product updates, so your roof meets manufacturer specs and clears the city’s inspections.
What you get is experience without the factory script. We’re independent, which means we tell you when a repair is the smarter call and when replacement is the honest answer. Parts are OEM-compatible, sourced to your specific job rather than pulled off a shelf. Our crews carry up to 28 years of hands-on experience, and every scope is written down before a nail moves. When you call, a live person picks up – day or night – and that’s not a call center in another state.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Solve in Malibu
GAF systems are built well. In Malibu, they meet conditions the factory spec sheet never fully accounts for. Here’s what we see most:
- Salt-air corrosion of galvanized nails and drip edge. On ocean-facing slopes, standard galvanized fasteners back out and edge metal lifts within a few seasons. The salt fog in Malibu accelerates this faster than inland crews expect, which is why we spec stainless or hot-dip galvanized fasteners on anything within reach of the marine layer.
- Ember intrusion at ridge vents and roof-to-wall intersections. In Very High Fire Hazard Severity Zones, standard vents become ember entry points. During Santa Ana events, that’s the difference between a roof that holds and one that doesn’t. Ember-resistant vent upgrades close the gap.
- Premature cracking on south- and west-facing roofs. Thermal cycling from intense UV plus Santa Ana wind swings stresses Timberline shingles on the hottest exposures. Granule loss shows up early, and cracking follows.
- Wind uplift at perimeter edges. When GAF’s high-wind nailing pattern gets skipped or starter strip adhesion fails, the first big Santa Ana gust peels the perimeter. Edge work is where a lot of Malibu roof failures start.
- Wind-driven rain intrusion at valleys. Heavy winter storms push water into valley flashings that were never detailed for driving rain. We find it after the fact, usually as a ceiling stain on a hillside home.
GAF Service in Malibu: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every GAF roof we touch in Malibu, and it’s not equally true one town over. The city’s Very High Fire Hazard Severity Zone requires Class A roofing and ember-resistant vents. GAF’s Timberline shingles meet Class A only when installed with specific underlayment and venting components – a matched assembly, not just a shingle. Coastal contractors have to verify that assembly against the permit before approval, because the building department checks the whole system, not the product name on the bundle. Pair that with the California Coastal Commission gauntlet and the geotechnical reviews for bluff-top parcels on Point Dume and Carbon Beach, and you get a roof where the wrong underlayment or a standard vent can stall your inspection for months. We plan the assembly up front so the inspector signs the same roof GAF warrants.
GAF Models & Products We Service in Malibu
We work across the GAF lines Malibu homeowners actually have overhead: Timberline HDZ and Timberline UHDZ architectural shingles, Grand Sequoia for the heavier-profile look, and Liberty SBS Self-Adhered Roofing for low-slope sections and rebuilds. For accessories, we use GAF-certified ridge vent, starter strip, and drip edge to keep your warranty intact – then upgrade fasteners to stainless or hot-dip galvanized and swap in ember-resistant vents where the fire zone requires it. Parts are sourced per job. We don’t claim a local warehouse, and we don’t need one to get the right components to your roof.
See the difference
Before
After
Before
After
Before
AfterGAF Service Pricing in Malibu
Pricing on a GAF roof in Malibu runs higher than inland because of the corrosion and fire-zone upgrades, not because of the shingles themselves. Here’s what our published ranges look like:
| Service | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
What drives the number: roof size and pitch, decking condition, whether the fire zone forces ember-resistant vents, and how much corrosion we find on the existing fasteners. A free estimate includes a deck inspection, a written line-item quote, and a clear call on repair versus replacement. No change orders after the fact – every scope change comes to you in writing first. Call (833) 762-8116 to schedule yours.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – GAF Construction in Malibu
Yes, but only when installed as part of GAF’s matched Class A assembly – specific underlayment and venting included. The shingle alone doesn’t carry the rating in a Very High Fire Hazard Severity Zone. We verify the full assembly against your permit so the inspection clears the first time, and we walk you through exactly which components are required. Call (833) 762-8116 to review your roof’s assembly.
Salt air corrodes standard galvanized nails, drip edge, and metal components on ocean-facing roofs, leading to fastener back-out and edge lifting. The fix is upgrading to stainless or hot-dip galvanized fasteners and checking edge metal at every service. On a bluff-top home, that’s not optional – it’s the difference between a ten-year roof and a shorter one.
Isolated damage – a few lifted shingles, one bad valley – is usually repairable. Replacement is the wiser call when multiple shingle fields show corrosion or ember-entry points across the roof. We’ll tell you which one you’re looking at after a deck inspection, and we put repair-versus-replace in writing. Call (833) 762-8116 for a straight answer.
Roof replacement in Malibu runs $8,000 – $20,000, with metal installations at $15,000 – $40,000 and repairs from $400 – $1,800. Fire-zone upgrades and salt-air fastener changes push the upper end. Call (833) 762-8116 for an exact quote – estimates are free.
They can add months before a permit is issued, especially on bluff-top and canyon parcels that need slope-stability review and caisson foundations. The roof assembly has to clear the Coastal Commission and fire-zone requirements together, so we plan the matched GAF system early to avoid a stalled inspection. Every eligible job gets permits pulled and inspections signed – the permit inspector works for you, not for us. Call (833) 762-8116 to start the paperwork right.
Service Areas Near Malibu
We also work GAF roofs in Agoura Hills, Calabasas, Topanga, and Santa Clarita. Same coastal corrosion plan, same fire-zone discipline. If you’re just over the hill, we make the drive, and we treat your 90265 ZIP with the same care as the Malibu coast.
Book Your GAF Service in Malibu Today
Whether it’s a full GAF Timberline replacement on a Point Dume home or a storm-damage repair after the next Santa Ana, we’ll give you a written scope, OEM-compatible parts, and a free estimate. Our published offers stand: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. Call (833) 762-8116 – a live person answers, and we’ll schedule your visit.
Written by the team at Barrett & Sons Construction Santa Clarita.