Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Santa Monica, CA | Barrett & Sons Construction Santa Clarita
We provide independent Master Halco service across Santa Monica, handling vinyl and aluminum fence installation, gate hardware, and the driveway work that usually goes with it. What makes our Master Halco work here different is that we plan every fence line around the marine layer and salt air that eat ferrous metal on the west side, not around a generic coastal checklist. We work with Master Halco fencing and rail products every week. We’re an independent contractor and are not authorized, sponsored, or endorsed by Master Halco. Call (833) 762-8116 for a free estimate.

Why Santa Monica Residents Choose Us for Master Halco Service
Fence work in Santa Monica rewards familiarity. We know the residential and commercial galvanized chain link lines, the ornamental aluminum panels, the vinyl privacy systems, and the welded-wire and gate hardware that go with them, because we install and repair them often enough to have opinions about which ones last.
That matters most on the coast. A fence detail that works fine twenty miles inland can fail within a few seasons in the fog zone, and we’ve watched enough coastal runs go bad to know where the weak points are.
We match OEM Master Halco components whenever they’re available, because mixing low-grade aftermarket fittings is what causes early gate sag and post failure on coastal runs. We go to a quality aftermarket equivalent only when an OEM part is discontinued. Permits get pulled on every eligible job and every price change arrives as a written change order before work moves. Call (833) 762-8116 to set up your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Solve in Santa Monica
- Galvanized chain link rusting through at the fittings. In Ocean Park and north-of-Montana yards, salt-laden fog sits on the wire and collects in the fittings, and you get accelerated zinc corrosion and red rust well before the fence looks old. Coastal exposure cuts service life noticeably compared to the same fence inland.
- Failed posts below a fence that still stands. Line posts and post bases set in concrete that was never detailed for drainage take on heave and rot at grade on the marine-layer side. The fence line looks up and sound while the posts are quietly going underneath it.
- Chalky, fading vinyl panels. Vinyl privacy runs on south- and west-facing elevations in the fog zone pick up oxidation, an algae film, and UV fade. Gates sag when the hinges and posts weren’t sized for a true wind load.
- Gate failures at the joints, not the panel. Ornamental aluminum gates tend to fail where the powder coat chips and at hinge and finial fasteners. Dissimilar-metal contact plus salt air drives galvanic corrosion right there.
- Rotten framing behind “small” repairs. Pull a section of old fencing and you find sheathing, footings, or framing that the marine layer has been working on for years. This is where a fence job grows.
Master Halco Service in Santa Monica: What Local Conditions Mean for Your Equipment
Santa Monica’s regulatory layer is the part most homeowners don’t expect. Fences, gates, and hardscape work near the beach can fall under coastal development permit review and the city’s design and height limits, and the Land Use and Circulation Element adds another layer of scrutiny on top. So a Master Halco fence or gate install here is a permit-and-neighbor-notice job, not a weekend drop-in. That matters in the 90401 and 90404 ZIPs especially, where lots sit close together and a fence line can touch more than one property.
Then there’s the marine layer. Salt fog on the west side speeds corrosion on anything ferrous, enough that fastener and finish choice decides how long the fence lasts. A galvanized chain link that would run a long life in Castaic is a different proposition on a west-facing run off Ocean Park Boulevard. We specify hardware and finishes for that reality instead of defaulting to what’s cheapest on the pallet.
Master Halco Models & Products We Service in Santa Monica
We work across the Master Halco lines that make sense for Santa Monica properties: residential and commercial grade galvanized chain link, ornamental aluminum residential fencing, vinyl privacy fencing, and welded-wire with the gate hardware and fittings that hold it all together.
Parts get sourced per job, matched to the specific line and vintage of your fence; we don’t claim local stock, because every run is different and old fences often have mixed hardware. We check what’s still available from the manufacturer before we reach for a substitute, and when we do substitute, we tell you why in writing. That approach is the core of our Master Halco service, and it’s the same on a gate hinge as on a full perimeter.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Santa Monica
Here’s what fence and driveway work typically runs. These are ranges, not quotes; your property line, grade, drainage, and whether coastal or design review applies all move the number.
| Service | Typical Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
A free estimate includes walking the property line for setbacks, grade, and drainage, checking whether the existing posts can be salvaged or reset, and a written line-item scope. If the old fence comes out and rot or failed footings turn up, the added work arrives as a written change order before we do it. Call (833) 762-8116 for your free estimate.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Santa Monica
Powder-coated ornamental aluminum and quality vinyl privacy fencing hold up best in the fog zone, because neither relies on a galvanized coating that salt air will work through. Galvanized chain link is still the right answer for many yards, but coastal exposure cuts its service life and the finish and fittings you choose decide how much. We’ll walk your exposure with you and give you a written recommendation.
Often yes. Fence and gate work near the beach can fall under coastal development permit review and the city’s design and height limits, and some lots add neighbor-notice requirements on top. We confirm what applies to your parcel before the job is priced, pull the permits, and get the inspections signed. Call (833) 762-8116 and we’ll sort out your property’s situation.
The marine layer is the cause. Salt-laden fog sits on the wire and collects in the fittings on west- and south-facing runs, and that drives accelerated zinc corrosion and red rust. Coastal exposure takes years off a galvanized fence compared to an inland installation. If the frame and posts are sound, we can repair; if the wire is corroded through, replacement is usually the cheaper long-term move, and we’ll tell you which one you’re looking at.
Usually fixable. Sag on a coastal vinyl gate almost always traces to undersized hinges or a post that wasn’t sized for the wind load, not to the panel itself. We can rehang the gate with correctly specified hardware and reset or reinforce the post. If the panel has oxidized and gone brittle from UV exposure, replacement of that section is the better call. Call (833) 762-8116 for an honest read.
Yes, and it’s often the smarter way to do it. When a driveway replacement and a fence install happen together, the grading, drainage, and footing work get coordinated instead of done twice, and the marine-layer drainage details that protect your posts get built in from the start. Concrete driveway runs typically fall in the $4,500 – $12,000 range and full replacement in the $5,000 – $14,000 range, paired with vinyl fence at $3,500 – $9,000 or aluminum at $4,000 – $10,000. Call (833) 762-8116 for a combined written estimate.
Service Areas Near Santa Monica
We handle Master Halco fence and gate work in Santa Monica and the communities around it, including West Hollywood, Topanga, Calabasas, Agoura Hills, and Castaic. Same marine-layer planning applies on every run, whether you’re near the beach or up in the canyons.
Book Your Master Halco Service in Santa Monica Today
Whether you’re re-fencing a rear yard in Ocean Park or replacing a gate on a west-facing run, call (833) 762-8116 for a free estimate and a free second opinion on any written estimate you already have. A live person answers the phone. Inside the county there’s no trip charge.
Written by the team at Barrett & Sons Construction Santa Clarita.