A Barrett company - serving Santa Clarita, CA
M

Mr-Glass Construction Service in Santa Clarita, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Clarita Homeowners Choose Mr-Glass Construction

We provide independent Mr-Glass construction service in Santa Clarita: we install, repair and re-fit Mr-Glass frameless shower enclosures, mirrors and interior glass, and we fit the glass, hardware and seals to the actual opening rather than to a catalog photo. That’s the difference. A sliding panel that’s been dragging on a curb for a year needs the opening re-leveled, not just a new roller. Our technicians have up to 28 years of experience, and every completed job is backed by our written 90-Day Done Right Promise.

Worker operating a plate compactor to level gravel for driveway installation in Santa Clarita, CA

Call (833) 762-8116

One thing to be clear about up front: Barrett & Sons Construction Santa Clarita is an independent Mr-Glass service provider. We are not affiliated with, authorized by, or sponsored by Mr-Glass. We work on their products because we know them, not because they’ve endorsed us. If you want a straight read on what your enclosure actually needs, call us at (833) 762-8116.

Why Trust Barrett & Sons Construction Santa Clarita for Your Mr-Glass Construction?

Mr-Glass makes a good enclosure. The problems we see in Santa Clarita homes almost never come from the glass itself. They come from hardware that’s worn past its service life, seals that hardened two summers ago, and a wall jamb that was never shimmed square in the first place. Knowing which of those three you’re looking at saves you from paying for the wrong fix.

We work on the Mr-Glass lines we see most in this valley: the Series 500/600-style 3/8-inch frameless sliding systems, the pivot and neo-angle doors with through-glass hinges, the semi-frameless bypass doors with anodized top rails, and the custom mirror and interior glass work. When a part is still available from Mr-Glass, we use the OEM roller, guide, hinge or sweep so the holes, cutouts and glass thickness match exactly. When a proprietary part has been discontinued, we size a quality aftermarket piece to the actual glass rather than drilling new holes to make something else fit.

That’s the warranty-safe way to service an enclosure, and it’s the approach we take on every Mr-Glass job in Santa Clarita. We’re licensed and insured, we put the scope and any price change in writing before work starts, and our work carries the 90-Day Done Right Promise. If it’s not right, one call brings us back.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Fix in Santa Clarita

Here’s what actually fails on Mr-Glass enclosures in this valley, and why. Most of these are hardware and seal problems, not glass problems.

  • Bottom guide and roller wear on frameless sliding doors. The nylon rollers flat-spot and the bottom guide wears oval, so the panel drops and drags on the curb. Once it drags, the sweep seal lifts off the curb and water escapes under the door instead of back into the pan. In Santa Clarita this happens faster than people expect because mineral-heavy water leaves deposits on the track that grind the rollers down.
  • Through-glass pivot hinges loosening in the cutouts. The hinge gaskets compress over time, and in a home that’s seen a few small tremors the screws back off a quarter turn. The door sags, the strike-side seal gaps at the top, and you get a wet bathroom floor after every shower. Retorquing a through-glass hinge isn’t a homeowner job; the glass can chip at the cutout if it’s clamped unevenly.
  • Anodized and coated top rails pitting and corroding. Hard water and high-mineral conditions eat the finish at the wall jamb and at every hinge contact point, and the corrosion stains the glass right where it sits. Left alone, a pitted rail is what eventually cracks a panel.
  • Silicone and vinyl sweep seals failing at the curb and wall jambs. The vinyl sweep hardens in the summer heat and stops flexing; the silicone at the curb shrinks and pulls away. Water tracks onto the bathroom floor and, over a season or two, into the subfloor. This is the failure that costs the most when it’s ignored.
  • Panels out of square after a remodel or a slab issue. On the post-tension slabs common in Valencia and parts of Saugus, a wall that’s a half inch out of plumb shows up as an enclosure that never closes flush no matter how many times the hardware is adjusted. The fix is shimming and re-leveling the opening, and knowing where the tension cables run before anyone drills.

Mr-Glass Parts & Our Repair-vs-Replace Approach

OEM parts are the right first choice on Mr-Glass enclosures because they match the original cutouts, hole spacing and glass thickness. A Mr-Glass OEM roller or guide drops into the existing door without drilling, and that keeps the enclosure’s original sealing geometry intact. Where a proprietary part has been discontinued, an aftermarket roller, guide or sweep sized to the actual glass is the honest alternative. What we won’t do is drill new holes in a good panel to force a part that doesn’t belong.

Parts are sourced per job. We don’t claim to stock Mr-Glass components, and we won’t tell you a part is on a shelf when it isn’t. We identify what’s needed, confirm availability, and put the material cost in the written estimate before we order.

Repair versus replace comes down to three questions. Is the glass chipped at a hinge cutout or a roller hole? Is the panel out of square? Is the opening itself the problem? If the answer to the first two is no and the third is fixable, new hardware and seals will give you years more service. If the glass is chipped at a cutout or the panel has warped, another round of hardware is money spent on a door that will keep failing. Call (833) 762-8116 and we’ll tell you which one you’re looking at, free.

Our Mr-Glass Service Process – Step by Step

  1. 1
    Diagnosis. We check the panel for square, test the rollers and guides for flat spots, inspect each through-glass hinge for gasket compression and screw torque, and look at the curb and jambs for silicone failure and water staining. On a Santa Clarita job we also look at the water: mineral deposits on the track tell us how fast the hardware has been wearing.
  2. 2
    Written scope. You get the findings in writing, with the parts and the labor itemized. If the scope changes mid-job, the change order comes to you before the work continues. No surprise invoice at the end.
  3. 3
    Repair or install. Hardware and seals are replaced, the opening is re-leveled and shimmed, and the curb and jambs are re-sealed with silicone rated for a wet environment. On a new installation we set the glass to the actual opening, not to the nominal dimension.
  4. 4
    Test and warranty. We run water through the enclosure before we leave and check for tracking at the curb and jambs. Then the 90-Day Done Right Promise goes on the paperwork. If a seal fails or a door starts dragging again inside that window, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Products We Service & Install in Santa Clarita

We work on the Mr-Glass product families that show up in Santa Clarita bathrooms and homes most often:

Worker operating a plate compactor to level gravel for driveway installation in Santa Clarita, CA
  • Frameless sliding shower door systems, including the Series 500/600-style 3/8-inch enclosures
  • Pivot and neo-angle frameless shower doors with through-glass hinges
  • Semi-frameless bypass shower doors with anodized top rails
  • Custom mirrors, glass shelving and interior glass panels

That covers frameless glass shower enclosures, walk-in showers and shower remodeling, and tub-to-shower conversions. Most of the Mr-Glass work we do in Santa Clarita is one of those three, and it’s usually paired with tile, waterproofing and vanity work that has to line up with the glass.

We Also Service These Brands

Mr-Glass is one part of what we do. On the same bathroom we regularly fit KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your project touches the kitchen or the rest of the house, we carry premium brands across every trade: GAF and CertainTeed roofing, Andersen and Marvin windows, Belgard and Techo-Bloc hardscapes. One company, one written scope, one number to call.

FAQs – Mr-Glass Construction Service in Santa Clarita

Is Barrett & Sons Construction Santa Clarita authorized by Mr-Glass? No. We’re an independent Mr-Glass service provider and we are not affiliated with, authorized by or sponsored by Mr-Glass. We install and service their products because we know the hardware and the failure modes, and every recommendation we make is based on what your opening actually needs. That independence is a benefit: we’ll tell you when a repair is the right call and when it isn’t.

Do you use genuine Mr-Glass/OEM parts? Yes, whenever the OEM part is still available. Mr-Glass OEM rollers, guides, hinges and sweep seals match the original cutouts, hole spacing and glass thickness, which keeps the enclosure sealing the way it was designed to. Where a proprietary part has been discontinued, we use a quality aftermarket piece sized to the actual glass rather than drilling new holes to force a fit. Parts are sourced per job, and the cost goes in the written estimate before we order.

How long does Mr-Glass service take? A hardware and seal refresh on a frameless sliding door is usually a single-visit job once the parts are in hand. A full enclosure replacement takes longer because the opening has to be re-leveled and the curb and jambs re-sealed and cured. We give you the timeline in the written scope so you’re not guessing, and if the schedule moves we tell you before it does.

What Mr-Glass models/series do you cover? We cover the frameless sliding systems including the Series 500/600-style 3/8-inch enclosures, the pivot and neo-angle frameless doors with through-glass hinges, the semi-frameless bypass doors with anodized top rails, and custom mirrors, glass shelving and interior glass panels. If you’re not sure which one you have, send a photo of the top rail and the hinge and we can usually identify it.

Will service void my Mr-Glass warranty? Servicing an enclosure with correct OEM or properly sized aftermarket parts doesn’t void a manufacturer warranty, but we’re independent and we can’t speak for Mr-Glass on coverage. What we can tell you is that we put our own 90-Day Done Right Promise in writing on every job, and we won’t drill new holes in a panel or clamp a through-glass hinge unevenly, because that’s the kind of work that does create problems. Ask us before you sign anything and we’ll walk you through it.

How much does Mr-Glass construction cost in Santa Clarita? It depends on whether you’re repairing hardware or replacing an enclosure. Here are the ranges we quote in Santa Clarita:

Service Typical Range
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Shower Replacement $3,000 – $8,500
Bathroom Remodel $9,000 – $28,000
Small Bathroom Remodel $5,000 – $12,000
Bathroom Vanity Installation $800 – $3,000

Call (833) 762-8116 for an exact quote on your Santa Clarita bathroom. Estimates are free, and there’s no trip charge inside the county.

Book Your Mr-Glass Service in Santa Clarita, CA

If your Mr-Glass door is dragging on the curb, leaking at the jamb, or you’re planning a tub-to-shower conversion and want the glass done right the first time, call Barrett & Sons Construction Santa Clarita at (833) 762-8116. A live person answers, day or night. We’ll schedule a free estimate, put the scope and any change in writing, and back the work with our 90-Day Done Right Promise. Ask about the free second opinion on any written estimate, and our permanent 10% senior and veteran discount.

Written by the team at Barrett & Sons Construction Santa Clarita.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch