A Barrett company - serving Santa Clarita, CA

Owens Corning Home Additions & ADU in Santa Clarita, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Home Additions & ADU: The Santa Clarita Owner’s Guide

If your home addition or ADU has an Owens Corning system in the envelope, we install and repair the building components around it, and a permitted addition in Santa Clarita typically runs $45,000 – $130,000 depending on size, foundation, and finish. Standalone ADUs land higher, at $90,000 – $220,000. We’re an independent contractor, not affiliated with Owens Corning, and we pull every permit the City of Santa Clarita requires and pass inspection before anyone gets paid.

Two professional contractors installing a new front door at a home. in Santa Clarita, CA

Call (833) 762-8116

Owners usually call us after a slowdown they can’t explain. The ceiling in the new room sweats during a June heat wave. An upstairs addition feels hotter than the rest of the house even with the AC running. The Owens Corning insulation batt in the attic of the addition has sagged or pulled away from the wall cavity. Or the utility bills on the new square footage came in well above what the builder promised. In Santa Clarita’s dry, hot summers and cool valley nights, the building envelope is what separates a comfortable addition from an expensive one, and the Owens Corning products inside that envelope only perform when they’re installed to spec.

Which Owens Corning Models This Applies To

Owens Corning makes products across several categories, and which one lives in your addition changes what we’re looking at. The most common in Santa Clarita homes is Owens Corning PINK fiberglass batts, sold in R-values from R-11 up to R-38 and sized for standard 16-inch or 24-inch on-center framing. If your addition is older, you may have Owens Corning AttiCat blown-in in the ceiling assembly. Foam sheathing and the Foamular line show up on newer construction and on exterior wall assemblies where a rigid board was used behind siding.

How to identify what you’ve got: look for the Owens Corning label on the batt face or the printed R-value on the kraft paper. Batt width matters more than most owners realize. A 15-inch batt in a 16-inch bay leaves a gap that guts your R-value, and a batt compressed into a smaller cavity does the same. For a partial repair, a quality aftermarket batt of the same R-value and correct width performs the same as OEM. What it can’t fix is an assembly that was framed wrong from the start. We’ll measure the cavity and confirm the R-value before we quote anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Home Additions & ADU Is Failing

  • Ceiling is hot to the touch in summer. Insulation in the addition’s ceiling has settled, been compressed, or was installed short of spec. In Santa Clarita, attic temps over 140°F in July make any gap obvious.
  • Walls feel cold in winter, warm in summer. Missing, thin, or displaced batts in the exterior wall cavity. Often the original installer skipped a bay, or a plumber moved a batt and never replaced it.
  • Condensation or moisture on the ceiling or wall. A vapor barrier was installed on the wrong side of the assembly, or a gap lets warm moist air hit a cold surface. Left alone, this turns into mold in the addition’s framing.
  • Energy bills jumped after the addition finished. The addition is losing heat or cool air through an assembly that isn’t sealed. Air leaks around outlets, top plates, and window rough openings are common culprits.
  • Visible sagging or bare spots in the attic or crawl space. A batt has fallen out of place or been disturbed by a later HVAC or electrical job. The R-value in that area is effectively zero.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Owens Corning-compatible home additions and ADU work in Santa Clarita runs $45,000 – $130,000 for a permitted addition, with standalone ADUs at $90,000 – $220,000. That range covers framing, insulation, drywall, finish, and the permit and inspection process. What pushes you toward the top: a larger footprint, a slab or pier foundation on a sloped lot, an upgraded envelope, and finish upgrades like the KraftMaid, Cambria, or Silestone products we also install in kitchens and baths.

We quote parts and labor as line items on a written estimate, not as a single bundled number. Every price change before or during the job arrives as a written change order before work proceeds. The finished job is covered by our written 90-Day Done Right Promise: if something isn’t right, you call once and we come back and fix it.

Two professional contractors installing a new front door at a home. in Santa Clarita, CA

DIY or Call Us?

An owner can safely check a few things on their own. Look in the attic and crawl space for visible sage-orange PINK batts or gaps. Note the printed R-value on the batt face. Feel the addition’s ceiling and exterior walls in mid-afternoon. Take photos of what you find.

The part where DIY goes wrong is everything past the inspection. Replacing a batt in a bay is one thing; diagnosing why the assembly is failing is another. Get the vapor barrier on the wrong side and you’ve created a mold problem in three years. Compress a batt and you’ve quietly dropped your R-value. Miss the permit and inspection and the addition can become a headache come resale. We’re licensed, insured, and pull the permits so the inspector signs off on the work. Call (833) 762-8116 for a free estimate before you buy a single bag of insulation.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch