Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Santa Clarita Owner’s Guide
We install Owens Corning-compatible kitchen remodeling in Santa Clarita, and a full kitchen typically runs $14,000 to $45,000 installed, with smaller kitchens landing between $9,000 and $20,000. This isn’t a one-day job – most kitchens take a few weeks from demo to final inspection – so we schedule a free estimate rather than promise same-day work. Owens Corning is known best for insulation and roofing, and many Santa Clarita owners first notice a problem when their kitchen runs hot in August, their utility bill creeps up, or a remodeler opens a wall and finds old or missing insulation behind the cabinets. That’s usually where the conversation starts.

Which Owens Corning Models This Applies To
Owens Corning doesn’t make cabinets or countertops, so when we talk about Owens Corning in a kitchen, we’re talking about the building envelope and the products that sit behind and above the finishes. The main lines you’ll run into in Santa Clarita homes are Fiberglas insulation batts (R-13, R-15, R-19, and R-21 depending on the wall cavity), blown-in attic insulation, and Owens Corning’s rigid foam and duct products. The right spec depends on your wall depth and whether you’re insulating a 2×4 or 2×6 cavity.
To match the right product, look at the label on any existing batt – it lists the R-value and dimensions – or measure your cavity depth and width before you buy anything. For attic work, the depth of existing insulation tells you whether you’re topping off or starting fresh. On the OEM-versus-aftermarket question: Owens Corning fiberglass batts have close equivalents from other manufacturers that meet the same R-value and fire rating, and for a lot of kitchen walls that’s a fair, honest choice. Where we steer owners toward the Owens Corning spec is when it’s already in the wall and you want continuity, or when the product carries a specific rating the inspector wants to see. We’re an independent contractor and not affiliated with Owens Corning – we install to spec and pull the permit like any other job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
Insulation and envelope failures don’t announce themselves. They show up as small annoyances you learn to live with until a remodel forces the issue. Here’s what we see most:
- The kitchen is noticeably hotter than the rest of the house. That’s often missing or compressed wall insulation behind the cabinets, or a gap where the old batt sagged. In Santa Clarita’s dry summer heat, a thin wall shows it fast.
- Utility bills climb without a change in habit. Attic insulation that’s settled below its rated depth loses its R-value, and the kitchen – often over a garage or on an exterior wall – pays for it.
- Condensation or a musty smell near exterior walls. This points to a vapor or air-sealing problem, not just missing insulation. It needs a proper look before you close the wall back up.
- Visible sagging, torn, or darkened insulation when a wall is opened. Age, moisture, or pest damage – and once it’s compromised it isn’t coming back to full performance.
- Drafts around outlets and cabinet penetrations. Air moves through unsealed gaps that insulation alone won’t stop. Air sealing has to happen before the new material goes in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Kitchen remodeling in Santa Clarita runs $14,000 to $45,000, and what pushes you toward the top or bottom of that range is scope, not brand. A small kitchen remodel lands between $9,000 and $20,000. Cabinet installation alone is $4,000 to $13,000, countertops $2,000 to $6,500, a backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. Insulation and air sealing usually ride inside the wall-opening portion of the job rather than as a separate line, but we itemize it so you can see it.
What drives the range: how many walls get opened, whether the layout moves, the cabinet and countertop brands you choose, and whether electrical or plumbing needs to be brought up to code once the wall is open. We write every allowance and every scope item down before work starts. If the plan changes, it comes to you as a written change order before anyone touches the job – no surprise invoice at the end. Every completed kitchen is backed by our written 90-Day Done Right Promise.

DIY or Call Us?
You can absolutely check the easy things yourself: read the label on an exposed batt, measure your cavity depth, look at the attic insulation depth, and note where drafts come from. That’s useful information to have when you call.
Where DIY goes wrong is the part nobody sees on a video: opening a wall and finding moisture, mold, or a wiring or gas line you didn’t expect. Kitchen walls hold plumbing and electrical, and in an older Santa Clarita home that’s not a place to guess. Air sealing and insulation also have to be done in the right order and to the right spec, or you’ve spent the money and gained nothing. If a wall needs to come open, that’s the point to get a pro in. Call us at (833) 762-8116 for a free estimate – we’ll tell you honestly whether it’s a small patch or a bigger scope. We also work with KraftMaid, Cambria, and Silestone on the finish side when a kitchen goes further than the walls.
FAQs
Fiberglass batts themselves don’t really wear out – properly installed and kept dry, they can hold their R-value for decades. What fails is the installation: settling, compression, moisture, or air leaks that let the wall underperform. In Santa Clarita’s heat, a compromised batt shows up as a hot kitchen long before the material itself is “worn out.” Call (833) 762-8116 and we’ll take a look – estimates are free.
Sometimes, yes. If a batt is intact and just shifted or compressed, repositioning and air sealing can restore performance without a full replacement. If it’s wet, moldy, or pest-damaged, it has to come out. We’ll tell you which one you’re looking at before quoting anything.
A single-wall insulation and air-sealing repair is often a day or two. A full kitchen remodel where the walls come open is a matter of weeks, not days – demo, rough-in, insulation, drywall, then finishes. We don’t promise same-day on a remodel; nobody should. We’ll give you a realistic schedule in writing with your estimate.
We spec to the R-value and rating your wall needs, source the product to that spec, and confirm it against the label before it goes in. If Owens Corning is what’s called for, that’s what we install; if a rated equivalent makes more sense for the job, we’ll tell you why in writing. Call (833) 762-8116 to start with a free estimate.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.