Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose PGT Construction
Barrett & Sons Construction Santa Clarita provides independent PGT construction service in Santa Clarita – window replacement, impact window installation, roof repair and slider work on PGT WinGuard, Aluminum Series and SolarMax units. What makes our PGT work different is that we actually know the product line: we read PGT’s own literature, understand which series hold up in this valley’s heat and wind, and use genuine OEM parts wherever they still exist. We are not affiliated with or authorized by PGT. We’re an independent provider, and we say so plainly.

Every eligible job gets permits pulled and inspections signed, every price change arrives as a written change order before work begins, and every finished job carries our 90-Day Done Right Promise. Call (833) 762-8116 to schedule a free estimate in Santa Clarita.
Why Trust Barrett & Sons Construction Santa Clarita for Your PGT Construction?
Our technicians have up to 28 years of experience, and a good share of that has been spent working on PGT units specifically. PGT’s aluminum frames and impact glass are a different animal from a standard vinyl window – the profiles are proprietary, the rollers and locks are brand-specific, and a generic replacement part often seats wrong and starts dragging again within a year. We’ve learned where PGT edges hold up and where they don’t in Santa Clarita’s hundred-degree summers and dry Santa Ana winds.
Warranty-safe service matters here. When a PGT insulated glass unit fails, the repair has to be done without disturbing the frame seal or the factory attachment points, or you risk a warranty question you didn’t need. We work to preserve what the manufacturer will still honor, and we tell you upfront when a unit is out of warranty so there’s no surprise later.
Owner-operated since 1998, Barrett & Sons still answers the phone with a live person, day or night. Tom Barrett’s name and license number are published. Look them up before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Santa Clarita
These are the PGT issues we see most often in Santa Clarita homes, and why each one shows up:
- Fogged or failed insulated glass on PGT WinGuard windows. The IGU seal breaks down after years of heat cycling – Santa Clarita summers routinely pass 100°F, and that expansion and contraction eventually lets moisture between the panes. You see cloudiness and can’t clean it off. It’s a glass-seal failure, not dirt.
- Sliders that drag, jump the track, or won’t latch. On PGT sliding glass doors, the bottom rollers flat-spot and the aluminum track scores over time. The door isn’t crooked – the rollers are worn and the track has lost its smooth surface, so the panel drops slightly and stops catching the strike.
- Worn weatherstripping and pile seals on PGT aluminum sliders. The mohair seals at the jamb and meeting stile break down and let air and dust through. Inland valley dust accelerates it. You feel a draft, or find grit on the sill, and the door still looks fine from the outside.
- Screen frame and hardware corrosion on aluminum units. Pitting shows up on frames, handles and locks in the high-dust inland air. It’s cosmetic until the lock won’t throw cleanly, and then it’s a security problem.
- Post-storm glazing and roof tie-in gaps. After Santa Ana winds or hail, a PGT opening can look fine while the flashing or shingles around it have lifted. That gap is where water gets in, which is why we check the glazing and the roof together.
PGT Parts & Our Repair-vs-Replace Approach
PGT OEM glass, rollers, locks and weatherstrip are the right call wherever they’re available. The frame profiles are proprietary, and aftermarket rollers often sit wrong in the track and cause the same drag within months. We source parts per job rather than claiming a stocked shelf, and we tell you what’s OEM and what isn’t before you approve anything.
The honest repair-vs-replace call depends on the frame. If a unit has failed glass only and the frame is sound, re-glazing is the right fix – it saves the frame and the factory seal. If the frame itself is corroded, or the unit is a discontinued profile where parts are gone, replacement makes more sense than chasing a part that no longer exists.
A typical scenario: a homeowner notices a PGT slider getting stiff, then hard to latch. A tech usually finds flat-spotted rollers and a scored aluminum track, not a failed frame. On the window side, a fogged WinGuard unit is almost always a broken IGU seal – re-glaze the sash or swap the whole unit, depending on frame condition. After a wind event, the same visit often turns up lifted shingles or flashing gaps around the opening, so both get checked before sign-off. Call (833) 762-8116 and we’ll walk you through the options for your Santa Clarita home.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We look at the specific PGT unit – series, glass condition, roller and track wear, seal and hardware state – and pinpoint the actual cause instead of guessing. You get a clear finding, not a sales pitch.
- 2
Repair or install, in writing. Whether it’s re-glazing a WinGuard sash or setting a new impact window, the scope and any price change are on paper before a single tool comes out of the truck.
- 3
Test. We operate the slider, check the latch and seal, and confirm the glass and opening are watertight before we pack up.
- 4
Warranty. Every completed job is backed by our written 90-Day Done Right Promise. If something’s off, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Santa Clarita
We work on the PGT lines Santa Clarita owners actually have. PGT WinGuard aluminum impact windows in single-hung, casement and fixed configurations. PGT WinGuard vinyl impact sliding glass doors. PGT Aluminum Series sliding glass doors. And PGT SolarMax energy-glass units in aluminum frames. Some older series are discontinued, so parts availability varies – we’ll tell you honestly whether your exact profile can still be serviced or whether replacement is the cleaner path. Nothing here is a claim about what we keep in stock; parts are matched to each job.
We Also Service These Brands
PGT isn’t the only line we know. Barrett & Sons Construction Santa Clarita also works with KraftMaid and Cambria in kitchens, plus Silestone and Kohler in baths – brand-name materials you can look up yourself, not mystery parts off a van. That matters when a single job touches more than one trade.
FAQs – PGT Construction Service in Santa Clarita
Yes, in many cases. If the frame and sash are sound and only the insulated glass unit has failed, re-glazing restores the window without replacing the whole unit. Frame condition decides it, so we inspect before recommending either path.
Most often it’s worn bottom rollers and a scored aluminum track, not a failed door. New rollers and track work usually fix it. If the frame is corroded or the profile is discontinued, replacement becomes the better call.
Replacement of windows typically does require a permit, and in Santa Clarita’s master-planned neighborhoods an HOA architectural review can add a layer on top of the city inspection. We pull permits and get inspections signed on every eligible job, and we factor HOA approval into the schedule. Call (833) 762-8116 for a free estimate.
The Aluminum Series holds up well here if it’s installed and sealed correctly. The weak point isn’t the frame – it’s the IGU seal and the weatherstripping, which age faster under 100°F summers and dry Santa Ana winds. Proper installation and timely seal service make the difference.
Sometimes, depending on the series. Original rollers, locks and glass are the right call when they’re available, because the frame profiles are proprietary. When a profile is discontinued, we source what’s correct and tell you when replacement beats chasing parts.
Here’s what the work typically runs in the Santa Clarita market:
| Service | Typical Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Exact cost depends on how many units, the series and glass, and whether the opening needs repair. Call (833) 762-8116 for an exact quote – estimates are free.
Book Your PGT Service in Santa Clarita, CA
If you’ve got a fogged PGT window, a slider that won’t latch, or storm damage around a PGT opening, call Barrett & Sons Construction Santa Clarita at (833) 762-8116. We pull permits, put every change in writing, and back the work with our 90-Day Done Right Promise. Estimates are free.
Written by the team at Barrett & Sons Construction Santa Clarita.