A Barrett company - serving Santa Clarita, CA

Schluter Home Additions & ADU in Santa Clarita, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Santa Clarita Owner’s Guide

Home additions and ADUs in Santa Clarita typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, and the Schluter side of that budget is the waterproofing and tile assembly that keeps a new bathroom, kitchenette or slab shower from leaking into your framing. Those assemblies are planned and scheduled, not same-day – a permitted addition takes months, not a morning – so the honest timeline matters as much as the price. Owners usually discover the Schluter part has failed the same way: a soft or hollow-sounding tile edge, a hairline crack following the shower floor’s slope, or a musty smell in a new bathroom that no amount of cleaning fixes.

professional kitchen remodeling service in Santa Clarita, CA

Call (833) 762-8116

Which Schluter Models This Applies To

Schluter Systems makes hundreds of parts, and the right one depends on the model line, not the color you see. For a new addition or ADU, the assemblies most Santa Clarita owners end up replacing are DITRA and DITRA-HEAT uncoupling membranes under floor tile, KERDI and KERDI-BAND waterproofing for showers and wet areas, SCHIENE and JOLLY edge profiles where tile meets drywall or outside corners, and KERDI-LINE linear drains in curbless showers. Identification comes off the packaging label or the printed fleece backing – the exact series code, roll width (DITRA-HEAT comes in 30-1/8 inch and 38-5/8 inch rolls, and the mat size has to match your heat cable spacing), and the drain grate model stamped on the linear drain frame.

The OEM-versus-aftermarket question is real with Schluter. Generic uncoupling membranes and waterproofing sheets exist at half the price, and some install fine in dry interior rooms. In a shower or on a slab over Santa Clarita’s expansive clay soils, the fleece anchoring, the overlap method and the warranty-backed system are the reason people pay for Schluter. If a failed part sits inside a completed assembly, the replacement almost always means removing and re-setting tile – the membrane underneath can’t be patched from above. We’re an independent construction company, not affiliated with Schluter; we install their systems and we’ll tell you when a knockoff is fine and when it isn’t. For kitchen and counter surfaces in the same project, we also work with KraftMaid, Cambria and Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

Membrane and waterproofing failures hide behind tile, which is why they announce themselves late. Watch for these:

  • Hollow or drummy tile edges. You tap a tile and hear a hollow report near a wall or outside corner. That usually means the uncoupling membrane lost bond, often from thinset mixed too dry or a substrate that moved.
  • Hairline cracks along the shower floor slope. A crack that follows the drain’s fall instead of the tile grid points to a KERDI-LINE drain that’s out of level or a membrane that wasn’t overlapped correctly.
  • Musty smell or recurring grout discoloration. Water is getting past the waterproofing and sitting in the pan. In our climate the dry months hide it and the winter rains expose it.
  • Tile lifting at an outside edge profile. A SCHIENE or JOLLY profile that has pulled away from the wall usually means the profile was set with the wrong leg depth for the tile thickness.
  • Warm spots that stopped warming (DITRA-HEAT). An uneven or dead floor over the heat mat usually traces to a cable nicked during tile work or a thermostat wired to the wrong sensor.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For context on where this sits in the build, the Schluter assemblies for a new ADU bathroom usually land in the $4,500 – $12,000 range of a walk-in shower installation, and the waterproofing package under a full ADU floor runs several thousand dollars on its own depending on square footage and whether you add heat. Line items that move the number: the size of the wet area, whether it’s a curbless shower, whether the linear drain has to be relocated, and how much tile has to come up to reach the failed layer.

You get the part and the system, a written scope and allowances before work starts, and a change order in writing if the tear-out reveals something the estimate didn’t cover. Every eligible job gets permits pulled and inspections signed, and the finished work carries our 90-Day Done Right Promise – if it isn’t right, Tom comes back and makes it right. Call (833) 762-8116 for an exact quote on your Santa Clarita addition or ADU; estimates are free.

DIY or Call Us?

There’s a short list of things you can safely check yourself. Confirm the membrane’s series code from the packaging or backing. Look at the linear drain grate for a model stamp. Tap tile edges for hollow spots and note where they are. Check the thermostat and floor sensor if a heat mat quit. What you shouldn’t attempt is tearing into a waterproofed shower or floor pan – the failure is almost always underneath the tile, and a patch over a compromised membrane just traps the water where it does more damage. A wrong repair in a wet area turns a part replacement into a full re-tile, which is the expensive outcome nobody wants. If you’re unsure, call (833) 762-8116 and we’ll walk you through what we’d check first.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch