Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Santa Clarita Owner’s Guide
We build and complete Sterling-line home additions and accessory dwelling units across Santa Clarita, and the installed range you should plan around is $45,000 to $130,000 for a home addition, with ADUs landing between $90,000 and $220,000. Most owners don’t discover a problem with the structure or its rough-in until something stops working the way it should: a door that won’t close flush, a bathroom vent that runs but never clears the mirror, a subpanel that trips when the ADU’s heat pump kicks on, or a finish that starts lifting after the first hot summer. That’s the moment you learn that the piece you thought was the whole problem is one part inside a larger assembly. We’re an independent Santa Clarita contractor, not affiliated with Sterling, and we’re happy to look at what you have before you spend a dollar.

Key Takeaways
- Plan on $45,000 to $130,000 for a Sterling-line addition in Santa Clarita, and $90,000 to $220,000 for an ADU.
- Identify your Sterling series before anything is ordered. Model and serial plates live in different places on additions and ADUs.
- Every job we take has permits pulled and inspections signed, with change orders in writing before work moves.
- A live person answers (833) 762-8116 around the clock.
Which Sterling Models This Applies To
Sterling’s line covers a lot of ground, and the part that fits one series won’t fit the next. Older Sterling addition packages often use dimensional framing and standard R-values that are a full step behind what current California code expects, which matters when you’re matching a wall panel, a header, or a window unit to an existing footprint. Newer Sterling ADU kits ship with tighter envelopes and factory-set electrical and plumbing rough-in points, so the replacement part has to match the rough-in, not just the opening.
Here’s how to find what you actually have:
- Look for the plate, not the sticker. On Sterling additions, the model and serial plate is usually on the interior face of a structural panel or inside the mechanical closet. On ADU units, check the electrical subpanel door and the data plate near the water heater.
- Measure the opening, not the part. Pull three measurements: width at top, bottom, and middle. If they don’t agree, you have a rough opening problem, not a parts problem.
- Get the series number before you order. A Sterling part ordered against the wrong series is a return and a lost weekend.
On the OEM-or-aftermarket question: for structural pieces and anything that touches the building envelope, we order OEM or a spec-equivalent rated to the same load. For trim, hardware, and finish items, a quality aftermarket part is often the smarter buy. We don’t claim to stock Sterling parts, and we don’t carry parts on a truck. What we do is source the right part, get it to your Santa Clarita address, and install it correctly the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
Santa Clarita sits in a hot, dry, wind-exposed valley with big day-to-night temperature swings. That climate is hard on the seams, sealants, and fasteners in any addition, and it’s the reason we see the same five symptoms on this side of the valley over and over.
- Doors and windows that stick in summer and free in winter. That’s thermal movement working against a frame that’s lost its anchor or a header that’s deflecting. Caught early, it’s a re-anchor and a shim. Caught late, it’s structural.
- Water stains or soft spots at the tie-in where the addition meets the original house. The flashing and sealant at that junction take the worst of the wind-driven rain and the worst of the UV. When it fails, water finds the framing behind the drywall.
- A bathroom or kitchenette vent that runs loud but moves no air. Usually a failed damper, a collapsed flex duct, or a fan sized for a smaller room than the one it serves. In an ADU, that’s moisture trapped in a small space.
- A breaker that trips when the mini-split, water heater, or range turns on. This is a load or a wiring problem, not a “reset it and forget it” problem. It’s the one on this list you don’t sleep on.
- Stucco or siding cracking along a straight line. A long, straight crack follows a seam or a joint. Hairline spiderweb cracking is normal. Know the difference before you panic or ignore it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest installed range for Santa Clarita, priced the way we actually quote it:
| Scope | Installed Range |
|---|---|
| Home addition (Sterling-line) | $45,000 to $130,000 |
| ADU construction (Sterling-line) | $90,000 to $220,000 |
| Garage conversion to ADU | $30,000 to $80,000 |
What moves you up or down that range: the footprint and the roofline tie-in, whether the foundation is slab or raised, how much of the existing rough-in can be reused, and the finish level you choose. A like-for-like panel replacement sits at the bottom of the range. A rebuild that opens the envelope, corrects a deflection, and re-flashes the tie-in sits higher, and we tell you which one you’re looking at before we start.
Parts and labor come to you line by line, in writing. Every scope, every allowance, and every price change arrives as a written change order before work happens. If a hidden condition turns up once the wall is open, you get the number in writing and you decide, not us. Every completed job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can absolutely check yourself. Walk the addition’s perimeter and look for straight cracks at seams. Run the vent fan and hold a tissue to the grille to see if it’s actually pulling air. Check that the model plate matches what you were told you have. Write down which breaker trips and what was running when it did. That information saves us time and saves you money.
Where DIY goes wrong on this job: anything that touches the electrical subpanel, the structural framing, or the building envelope. Those aren’t a weekend project, and a bad connection in a subpanel is a fire risk, plain and simple. Structural work done without the right load rating and the right fasteners can pass a glance and fail an inspection. We’re licensed and insured, we pull the permits, and the inspector signs off because the work is right, not because we got lucky.
If you’re not sure which of these you’re looking at, call us at (833) 762-8116. We’ll tell you what it is and what it should cost before anyone swings a hammer.
FAQs
A properly built Sterling-line addition should hold up 40 to 60 years in Santa Clarita’s climate, but the parts that fail first are the sealants, flashings, and fasteners at the tie-in, and those need attention every 8 to 12 years. The structure isn’t the weak point here. The junctions are. Call (833) 762-8116 for a free estimate if you’re not sure when yours was last checked.
Often, yes. A sticking door, a vent that won’t pull, a cracked seam, or a failed flashing is usually a targeted repair, not a rebuild. The exception is deflection or water damage in the framing: once structural members are compromised, patching it is money thrown at a bigger problem. We’ll tell you honestly which one you have after we look. Call (833) 762-8116 to schedule the visit.
A targeted repair runs one to three days. A panel or section replacement runs about a week. A full addition or ADU build runs six weeks to four months depending on size, permits, and finish level. The parts arrive before the crew does, so the clock starts when the material lands. Call (833) 762-8116 for a written schedule with your estimate.
We match the Sterling series number to the correct OEM part or a spec-equivalent aftermarket part rated to the same load and climate exposure, then order it to your Santa Clarita address. We don’t stock Sterling parts and we don’t carry them on a truck. We confirm the part number with you in writing before it’s ordered, so there are no surprises. Call (833) 762-8116 and we’ll start the lookup.
If your Sterling addition or ADU in Santa Clarita is showing any of these signs, the cheapest move is the earliest one. Call Barrett & Sons Construction Santa Clarita at (833) 762-8116 for a free estimate, and a live person will answer. We work Santa Clarita and the surrounding areas. We also service KraftMaid, Cambria, and Silestone installations, so if your project touches the kitchen or bath, that’s covered too.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.