Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Malibu, CA | Barrett & Sons Construction Santa Clarita
We provide independent Therma-Tru service across Malibu, from Point Dume remodels to Carbon Beach rebuilds. What makes our Therma-Tru work here different is that we treat the door as part of the whole exterior: the frame, the flashing, the seal, and the fire-zone rules around it. A fiberglass slab that looks fine on an ocean-facing wall can still be leaking, sticking, or failing an ember-intrusion check.

Barrett & Sons Construction Santa Clarita is an independent contractor. We are not authorized, sponsored, or endorsed by Therma-Tru, and we don’t pretend to be. We’re owner-operated, founded in 1998, with our technicians bringing up to 28 years of experience. Call (833) 762-8116 for a free estimate.
Why Malibu Residents Choose Us for Therma-Tru Service
We work on Therma-Tru door systems every week – Fiber-Classic and Smooth-Star slabs, rot-prone jambs, prehung units that never sat square. After a decade of marine air and sun, we know how these assemblies actually behave. That matters more in Malibu than almost anywhere, because the salt fog off the Pacific eats hardware long before the door skin shows wear.
We’re also the contractor who answers his own phone. A live person picks up 24 hours a day, every day. We pull permits on every eligible job, and every price change arrives as a written change order before work starts. If you’ve already been quoted by one of the national outfits, bring us that estimate – your free second opinion on any written estimate costs you nothing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Solve in Malibu
- Salt-eaten hinges and strike plates. On ocean-facing doors, the fasteners and lock hardware corrode well before the fiberglass slab fails. You end up with a door that drags, sticks, and won’t latch true – even though the panel looks perfectly good.
- Rotten jambs on older bungalows. The original wood or composite jambs and thresholds on Malibu’s 1950s to ’70s beach homes rot from wind-driven rain and coastal fog. The Fiber-Classic slab survives fine, but the frame swells and binds around it.
- Heat-cycled seals and weatherstrip. Sun and Santa Ana heat cycling dry out weatherstrip and warp cheaper skins. The result is daylight gaps and, on a Very High Fire Hazard site, ember paths the WUI inspection flags.
- Bad head flashing on bluff-top walls. Missing or improvised flashing lets water track behind the frame on hillside and bluff-top walls. You usually see it as interior staining, not an obvious exterior breach.
- Delaminated skins from sun exposure. Cheaper fiberglass skins delaminate under hard UV. Once that happens on a Malibu south-facing entry, the slab isn’t worth saving – the whole prehung unit gets replaced.
Therma-Tru Service in Malibu: What Local Conditions Mean for Your Equipment
Malibu’s Very High Fire Hazard Severity designation and its Wildland-Urban Interface ignition-resistant construction rules apply to door and window assemblies, not just roofs. That’s the part most homeowners don’t expect. Entry and patio doors here have to resist ember intrusion and meet non-combustible assembly standards that a Santa Monica or Pacific Palisades job never triggers. A door swap that would be a straight half-day replacement over the hill becomes a WUI paperwork and assembly question on a Point Dume parcel. It’s why we check the fire-zone rules before we touch the threshold, and why a door that “works fine” can still fail inspection.
On a typical Malibu beach bungalow, the Therma-Tru entry door sticks and the threshold shows dark staining long before the Fiber-Classic slab shows any wear. The culprit is usually a rotted composite jamb and corroded hinges from constant salt air and fog. A qualified local pro pulls the unit, checks the rough opening for water intrusion and flashing, then re-hangs the sound slab in a rot-resistant frame with OEM hardware – or replaces the whole prehung unit if the slab is delaminated. On hillside or bluff-top parcels, the same visit often turns up missing head flashing and weatherstrip gaps that have to be corrected for WUI ember-resistance.
Therma-Tru Models & Products We Service in Malibu
We service the Therma-Tru Fiber-Classic Collection fiberglass entry doors, the Smooth-Star Collection smooth fiberglass doors, the premium Classic-Craft Collection with its wood-grain look, and the fiberglass patio and sidelite units with multi-point hardware. We use genuine Therma-Tru replacement hinges, sills, sweeps, weatherstrip, and multi-point hardware so the frame geometry and warranty stay intact. We work with our suppliers to source parts for each job – we don’t claim to stock a warehouse of Therma-Tru parts locally. We’ll only substitute an imported aftermarket lockset when the door is out of warranty and the grade genuinely matches. You can look up every brand we install yourself, which is the point.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Malibu
What drives cost on a Therma-Tru job in Malibu is the frame condition, the flashing work, and how far the assembly has to be brought up to fire-zone requirements. Simple hardware and sweep replacements sit at the low end. A re-hang in a new rot-resistant frame lands in the middle. A full prehung replacement with corrected flashing and WUI-compliant hardware runs higher. Window and roof assemblies that get caught up in the same project use our standard local ranges.
| Service | Typical Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Window Replacement | $4500 – $15000 |
Your free estimate includes a written line-item scope, so you know what’s allowance and what’s firm before we start. No trip charge inside the county. Call (833) 762-8116 for an exact quote – estimates are free.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Malibu
Do Malibu fire-zone rules actually apply to replacing a Therma-Tru entry door? Yes. Malibu’s Very High Fire Hazard Severity and WUI rules apply to entry and patio door assemblies, so a replacement here has to meet ember-resistance and non-combustible assembly standards that most neighboring cities never enforce. We check the rules before we order the unit. Call (833) 762-8116 to schedule your free estimate.
Why does my ocean-facing Therma-Tru door stick even though the fiberglass looks fine? Because the failure is almost always in the hardware and frame, not the slab. Salt air corrodes hinges and strike plates and swells the jamb, so a perfectly sound Fiber-Classic panel drags and won’t latch true. Call (833) 762-8116 for a free estimate.
Is it worth re-hanging a Therma-Tru slab in a new frame instead of buying a whole new door? Usually yes. A sound Fiber-Classic or Smooth-Star slab with a rotten jamb is worth re-hanging in a new rot-resistant frame with OEM hardware, which costs less than a full prehung unit. We only recommend replacing the whole assembly if the slab is delaminated or warped. Call (833) 762-8116 for an exact quote.
Can a Therma-Tru door be flashed correctly on a bluff-top or hillside wall? Yes, with the right detailing. Bluff-top and hillside walls take more care than a flat-lot install because water tracks behind a poorly flashed frame and shows up inside. We correct head flashing and weatherstrip as part of the job so the assembly drains the way it should. Call (833) 762-8116 to get a written scope.
How does salt air shorten the life of Therma-Tru hinges and locksets in Malibu? Significantly. On ocean-facing doors, marine air corrodes fasteners and lock hardware long before the fiberglass shows any wear – often within a decade. That’s why genuine Therma-Tru replacement hardware matters; it keeps the frame geometry and warranty intact. Call (833) 762-8116 for a free estimate.
Service Areas Near Malibu
Beyond Malibu itself, we serve Calabasas and Agoura Hills, plus Topanga, Santa Clarita, Stevenson Ranch, and Castaic. Our Malibu service area covers the 90265, 90263, and 90264 ZIPs. If you’re near the coast or over the hill, ask us about Malibu service area coverage when you call.
We also handle Therma-Tru service across the wider region and work with neighbors in Agoura Hills and Calabasas.
Book Your Therma-Tru Service in Malibu Today
Sticking door, rotting jamb, or a WUI inspection note? Call (833) 762-8116 for a free estimate. We answer live any time, offer a free second opinion on any written estimate, and no trip charge inside the county. Senior and veteran homeowners get a permanent 10% discount.
Written by the team at Barrett & Sons Construction Santa Clarita.