Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Santa Clarita Owner’s Guide
Unilock bathroom remodeling in Santa Clarita typically runs $9,000 to $28,000 installed, and it is planned work: we schedule it around your calendar, pull the permits, and pass the inspections, so expect a firm date on the calendar rather than a same-day scramble. The range covers everything from a straightforward hall bath refresh to a full primary bath with a new shower, vanity, and tile work inside your existing footprint.

Owners usually start asking about Unilock when a failed piece shows itself: a hairline crack working across a wall paver the last installer set beside the tub, a grout line that won’t stay closed no matter how many times it gets patched, or that hollow knock you hear when you tap a shower wall. You didn’t buy a problem. The material was likely set over a substrate that wasn’t prepped for it, and that’s a different repair than swapping a single piece.
Typical Barrett & Sons Pricing in Santa Clarita
| Project Scope | Installed Price Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Which Unilock Models This Applies To
Unilock is known first for hardscape: pavers, retaining walls, and pool decking. Bathroom remodeling is a different scope, and we want to be straight with you about that. If you already own Unilock material you want used in a bath (a paver run as a shower curb, a cut paver border, a decorative accent), we’ll quote it as an installation scope. If you’re starting from scratch on a bath remodel, we install the premium bath fixtures you actually want and steer you to the right trade. We’re an independent service provider, not affiliated with Unilock.
To identify exactly what you have, look for a stamped code or series name on the side or underside of the piece (Unilock marks many product lines this way). If the stamp is buried, photograph the face, a corner cut, and a straight-on shot with a tape measure in frame. Knowing the series matters most for matching color and face texture on a partial replacement, and it matters less for a full bath rebuild where the material gets specified fresh. OEM Unilock is the safest route when you’re matching an existing run. A quality aftermarket equivalent gets you there cheaper and faster when color-matching isn’t a factor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- Hairline cracks spreading across a paver or stone, usually from a substrate that flexed or from thinset that wasn’t specified for the material. Cracks follow the slab’s movement, not the tile’s quality.
- Hollow knocking on a shower wall when you rap it with your knuckle. That sound means voids behind the material, and voids lead to loose pieces and water behind the wall.
- Grout that keeps cracking in the same line, no matter how often it’s patched. Repeated failure at one joint is a movement problem, and patching the symptom over and over wastes your money.
- Efflorescence or dark blistering on grout or stone, especially near the shower. That’s moisture finding a path it shouldn’t, and in Santa Clarita’s dry heat it often shows up as white powder rather than a wet spot.
- A vanity or wall piece that pulls away from the wall at the caulk joint. Seasonal expansion here is real, but a joint that opens wider every season means the piece is anchored to something that moves more than it should.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Unilock bath scopes land between $9,000 and $28,000 in Santa Clarita. Smaller baths come in around $5,000 to $12,000, and a tub-to-shower conversion sits between $3,500 and $10,000 depending on the drain location and what’s behind the old wall when we open it up.
What drives the range is honest: the substrate condition, how much demo is needed, whether the plumbing moves, and the finish level of the material you choose. We quote parts and labor separately so you can see where the money goes. Allowances go on the contract, and any change in scope arrives as a written change order before the work moves. Every eligible job includes permits pulled and inspections signed, and the finished work is backed by our written 90-Day Done Right Promise. Materials we install come from brands you can look up: KraftMaid, Cambria, Silestone, plus the fixtures you pick yourself.
DIY or Call Us?
You can safely check a lot on your own. Tap for hollow spots, photograph and measure the pieces, run the shower and watch for water beading toward the wall, and dry a suspected moist area with a fan and see if the powder comes back. That information is useful and saves everyone time.
What we don’t recommend is pulling a bath wall apart or resetting material over an unverified substrate. Setting a paver or stone piece over a slab that’s moving or a cavity that’s hollow just gives the crack a fresh start, and the water path gets worse, not better. A failed waterproofing layer behind the wall is not a weekend fix. Call (833) 762-8116 for a free estimate. We’ll tell you what’s actually failing before anyone recommends a scope.
FAQs
A properly installed bath scope should hold well past 15 years with normal use. The lifespan depends far more on the substrate and waterproofing than on the material itself, and Santa Clarita’s dry summers plus wet winters put real stress on exterior-facing walls.
Sometimes. A single hairline crack or a loose piece can be reset when the substrate under it checks out, and we’ll tell you honestly whether repair makes sense. Repeated failures in the same spot point to a bigger problem, and patching again just moves the cost down the road. Call (833) 762-8116 for an honest assessment.
A single-piece fix can run a few hours. A full bath scope usually takes several days to a week or more depending on demo, substrate, and how many trades are involved. We schedule around you and give you a written timeline before the first day. Call (833) 762-8116 for a real schedule on your job.
We source by the exact series or finish, not by color description. Bring the stamped code or a clear photo with measurements and we’ll match it right the first time. If exact matching isn’t possible, we’ll show you options before anything gets ordered. Call (833) 762-8116 to start the conversation.
Yes, on every eligible job in Santa Clarita. Permits get pulled and inspections get signed, and you get the paperwork. The last contractor told you permits were optional. They weren’t.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.