Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Glendale, CA | Barrett & Sons Construction Santa Clarita
We provide independent Unilock paver service across Glendale, CA: driveway and patio installation, full replacement, and repairs on systems that have started to move. What makes our Unilock work here different is slope. Glendale is two cities stacked on each other, flat-lot bungalows and graded foothill pads, and a paver field only lasts when the base and drainage are built for the slope it sits on. We’re Barrett & Sons Construction Santa Clarita, an independent contractor, not affiliated with or authorized by Unilock. Call (833) 762-8116 for a free written estimate.

Why Glendale Residents Choose Us for Unilock Service
We’ve spent years installing and repairing Unilock hardscape systems across the Santa Clarita Valley and into the Verdugo foothills, and steep engineered lots are where that experience earns its keep. Unilock Brussels Block, Beacon Hill Flagstone, Hollandstone and Bristol Valley all behave differently on a grade, and we specify each one to the site rather than the other way around.
Homeowners between 50 and 70 in Glendale call us because the last outfit quoted one price on the phone and handed them another at the door. We put scope in writing, allowances in writing, change orders in writing, before a single paver moves. Our crews have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and the 90-Day Done Right Promise is on the contract, not buried in fine print. We’re owner-operated, and crew members are background-checked and uniformed on every visit. Ask anyone on your street, or look up the license yourself. Unilock service is what we do, and we stand behind it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Glendale
Most of what we repair in Glendale isn’t a bad paver. It’s a base or drainage decision made years earlier that the slope eventually collects on.
- Paver creep and joint sand loss on steep driveway aprons. Hollandstone and Brussels Block units migrate downhill when the base wasn’t compacted in lifts or the grade exceeds what a sand-set system can hold. On Glendale’s hillside driveways, that shows up as a growing gap at the top of the run.
- Edge restraint failure on hillside patios. Beacon Hill Flagstone perimeters lift and spread at the toe of Verdugo foothill slopes when plastic edge restraint was spiked too shallow. Santa Ana winds push the field, then winter rain finishes the job.
- Efflorescence and salt bloom after a wet winter. The white haze on newer Unilock pavers is cosmetic, but Glendale homeowners often read it as product failure and ask for a full tear-out. Usually it isn’t one.
- Base washout and differential settlement over graded pads. Where drainage wasn’t cut into the hillside before the pavers went down, water pools under the bedding. Units rock, then crack at the bond lines.
- Piecemeal repairs over old unpermitted flatwork. Much of Glendale’s older flat-lot stock has had additions and patio work done without permits, so a repair sometimes starts with figuring out what’s actually under the surface.
Unilock Service in Glendale: What Local Conditions Mean for Your Unilock Equipment
Here’s the part that surprises flat-lot paver contractors: Glendale permits and inspects under its own building department, not LA County’s. Hardscape and retaining-wall work on Verdugo foothill lots in 91207 and 91208 has to clear a Glendale-specific plan check and slope/drainage review before a single paver is touched. That’s a sequencing problem most installers never run into, and it changes the whole order of the job. You don’t lay a field, then figure out where water goes.
On a typical hillside paver job, the homeowner reports pavers on a graded pad that rock, pond water after winter storms, and lose sand out of the joints every rainy season. The usual cause is a base that was never tied to a proper drainage cut, plus shallow edge restraint at the low end of the run. A qualified local pro pulls a few courses back to inspect the base, cuts in drainage or a French drain at the toe, rebuilds the base in compacted lifts, and resets with proper edge restraint. New sand over the old problem just buys one more season.
Unilock Models & Products We Service in Glendale
We work across the Unilock lines Glendale homeowners actually have underfoot: Brussels Block, Beacon Hill Flagstone, Hollandstone and Bristol Valley, now part of the Elderado line. Each has its own thickness, profile and joint behavior, and the repair approach follows the unit, not a generic method.
Unilock makes its own OEM edge restraint, joint sand and polymeric products, and those are the right call when a repair has to match color and profile. Generic aftermarket sand is acceptable for small relaid sections. We source parts per job, matched to your existing field. We don’t claim local stock, because we don’t keep any. What we do is measure, specify and order what the repair actually needs.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Glendale
Glendale paver work runs the ranges below. Steep lots, drainage cuts and retaining walls push toward the top; a straightforward flat-lot patio sits near the bottom.

| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Concrete Driveway Installation | $4,500 – $12,000 |
A free estimate includes a base and drainage inspection, a written line-item scope, and a clear answer on repair versus replace. If the base under the field is sound, we patch. If it isn’t, patching the surface just buys one more season, and we’ll tell you that up front. Any scope change arrives as a written change order before work proceeds. Call (833) 762-8116 to schedule your free estimate.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Glendale
Are you authorized by Unilock? No. We are an independent contractor, not affiliated with or authorized by Unilock. We specify, install and repair their systems to spec because they hold up on this terrain. Call (833) 762-8116 with questions about your project.
Do you use OEM Unilock parts? Yes, for any repair that has to match color and profile. Unilock’s own edge restraint, joint sand and polymeric products are the default; generic aftermarket sand is fine for small relaid sections. Call (833) 762-8116 for a free estimate on your repair.
How long does Unilock paver work take in Glendale? A typical patio runs a few days on a flat lot; a hillside driveway with a drainage cut and base rebuild runs longer, and the Glendale plan review adds time before work starts. We give you the real timeline in writing, not a phone-call guess. Call (833) 762-8116 to talk through your schedule.
Which Unilock models do you cover? Brussels Block, Beacon Hill Flagstone, Hollandstone and Bristol Valley, now part of the Elderado line. If you’re not sure what’s under your patio, we’ll identify it during the estimate. Call (833) 762-8116 to book one.
Which Unilock paver holds up best on a hillside Glendale lot? It depends on the grade and drainage more than the model: Beacon Hill Flagstone suits patios with a firm edge restraint, while Hollandstone and Brussels Block need a base compacted in lifts on steep drives. For an exact quote on your Glendale lot, call (833) 762-8116. Estimates are free.
Service Areas Near Glendale
We work throughout the Glendale service area, including the foothill ZIPs and the flat-lot blocks near downtown. We also serve nearby communities such as Burbank, La Crescenta-Montrose, Santa Clarita, Stevenson Ranch and Castaic. Burbank and La Crescenta-Montrose sit on the same foothill slope conditions, so the same approach applies.
Book Your Unilock Service in Glendale Today
If your Glendale pavers are rocking, ponding or losing sand, call (833) 762-8116 to schedule your free estimate. A live person answers 24 hours a day. We’ll inspect the base, put the scope in writing, and tell you honestly whether it’s a repair or a rebuild.
Written by the team at Barrett & Sons Construction Santa Clarita.