Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Home Additions & ADU: The Santa Clarita Owner’s Guide
We install and service Wellborn-compatible home additions and ADUs in Santa Clarita, from garage conversions to full two-story bumps, with installed pricing that typically runs $45,000 to $130,000 for additions and $90,000 to $220,000 for a detached or attached ADU. We’re an independent provider and not affiliated with Wellborn, so our job is to make their cabinetry and millwork specs fit a real Santa Clarita build. There’s no same-day version of this work. Additions and ADUs are permitted construction with plan check, footings, framing inspections, and finish schedules. What you get on the first visit is a written scope, a written allowance schedule, and an honest number.

Owners usually come to us after a smaller outfit quoted one price verbally and handed them a different invoice at the drywall stage. That’s the moment the Wellborn cabinets already ordered start looking like a liability instead of an upgrade. We put every scope, every allowance, and every price change in writing before a nail moves.
Key Takeaways
- Wellborn cabinetry belongs in an addition or ADU plan from day one, not bolted on after framing.
- Installed range in Santa Clarita: $45,000 – $130,000 for additions, $90,000 – $220,000 for ADUs, $30,000 – $80,000 for a garage conversion.
- Every eligible job includes permits pulled and inspections signed. Wellborn door and drawer fronts are built to standard frameless and face-frame specs, which matters when your cabinet layout meets a wall that was already there.
- The 90-Day Done Right Promise is written on every contract. If something’s off after we finish, Tom comes back and makes it right.
Which Wellborn Models This Applies To
Wellborn makes cabinets across several lines, and the line you pick drives the spec sheet you’ll hand your installer. Their premium lines versus their standard lines differ in box construction, door profile availability, and finish options. In practice, the two things we verify before anything gets ordered are the cabinet line and the exact door style, then the finished end panels and any applied moldings that have to match.
To identify what you have or what you’re planning, look for the label inside the cabinet door or on the back of the box. It carries the series or model code and a finish code. If the label is gone, we measure the box depth (12 inches for uppers, 24 for bases is standard), the door overlay, and the hinge style. That tells us which Wellborn line it’s compatible with.
On the OEM-versus-aftermarket call: for a brand-new addition, we spec genuine Wellborn parts through their dealer network because the door and drawer fronts, matching fillers, and crown moldings have to line up with the exact line and finish you ordered. For a repair inside an existing addition, a quality aftermarket hinge or drawer glide that matches the mounting pattern is often the smarter buy. It saves money and the visible parts stay Wellborn. We also work alongside KraftMaid, Cambria, and Silestone when a plan calls for them, but the Wellborn spec is what we plan the layout around.
Compatibility gotcha we see often: Wellborn boxes are built to standard dimensions, but additions built in the 1990s and early 2000s around Santa Clarita often have wall runs that are out of square by more than an inch. The cabinet fits the spec. The wall doesn’t. We laser-check every run before the Wellborn order goes in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Home Additions & ADU Is Failing
If you’re reading this page with a Wellborn cabinet already in a finished addition, you’re probably chasing a specific failure. Here’s what we see.
- Doors that rub or won’t sit flush. Usually the cabinet box has shifted because the wall behind it moved. In an addition, the new wall and the original house wall settle at different rates, and that shows up as a bind at the hinge side. The Wellborn door isn’t the problem. The wall plate is.
- Drawer glides that stick in one direction. On base cabinets near a sliding door or a garage conversion wall, the culprit is often temperature swing rather than the glide. Santa Clarita’s inland swings run 30 to 40 degrees between morning and afternoon in summer. Standard glides bind when the box moves less than the front does, so the glide gets blamed for a stone-cold assembly.
- Finish peeling on the underside of an upper cabinet. On a south-facing addition wall, the underside of a Wellborn upper takes direct radiant heat through a single-pane window. That’s a sun exposure problem, not a finish defect. It’s a California reality on any addition with west or south glass.
- Visible gaps at the wall or ceiling line. Applied crown and filler strips telegraph the failure of the wall it’s attached to. On a permitted addition we build, that line gets scribed and filled as part of finish work, not caulked over.
- Cabinet doors that sag on the hinge side. Almost always the hinge screws have lost bite in a thin panel, or the assembly wasn’t blocked at the studs. We block every Wellborn cabinet run to studs, not to drywall.
Replacement Cost & What’s Included
For a Santa Clarita homeowner planning a Wellborn-equipped addition, the installed range is $45,000 to $130,000 for an addition and $90,000 to $220,000 for an ADU. A garage conversion with Wellborn cabinetry typically runs $30,000 to $80,000. Those ranges are driven by foundation work, the number of wet walls, your window package, and the Wellborn line you choose.
Inside the ranges, kitchen work in the new space lands here:
- Kitchen remodel within the addition: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
Every written quote itemizes the Wellborn line, door style, finish, and any aftermarket hardware. Every change order is written and approved before work proceeds, so there is no invoice at the end that doesn’t match a number you already signed. All work on an eligible job is backed by our 90-Day Done Right Promise, and permits and inspections are part of the job, not an add-on.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do yourself: measure the run, photograph the labels inside the Wellborn doors, check for out-of-square walls with a level, and jot down the finish and series codes. That gives us everything we need to put a real number in front of you. What you should not do:
- Tear out framing or footings. Additions carry structural loads and require engineering and permits. Cutting into a bearing wall without a licensed pro is a genuine safety risk, not a shortcut.
- Replumb or rewire the new space. Gas, electrical, and water lines in a Santa Clarita addition need permitted, inspected work. This is where most DIY projects fail code and get red-tagged.
- Build the cabinet boxes into a crooked wall. The Wellborn box is built to spec. If the wall isn’t, the cabinet will fight the wall forever.
The work isn’t “harder than it looks.” It’s work that needs a permit and an inspector’s signature, and pulling that off without a contractor is where the day goes wrong. Call (833) 762-8116 and we’ll walk your plan through the real cost.
FAQs
A permitted addition built to current code should hold up 50 years or more on its foundation and framing. The Wellborn cabinetry inside it has a practical service life of 20 to 30 years with normal use, but sun exposure on inland-facing walls is the real variable. Santa Clarita’s west and south exposures take heat that finishes and hardware feel. Call (833) 762-8116 for an exact quote, and estimates are free.
Yes, in most cases. Door rubbing, sagging hinges, and drawer glides are hardware-and-adjustment fixes, not a rebuild. The one thing that almost never gets repaired is a structural or code problem. If the addition has out-of-square walls or an unpermitted footing, we recommend a second opinion before anything else. Free Second Opinion on Any Written Estimate is one of our standing offers.
A garage conversion typically runs 6 to 10 weeks. A ground-up or second-story addition typically runs 16 to 24 weeks, and an ADU runs 16 to 30 weeks depending on foundation, utility tie-ins, and plan check turnaround at the city of Santa Clarita. The written schedule we hand you maps to those inspections, and any schedule change arrives as a written change order. Call (833) 762-8116 for a free estimate.
Genuine Wellborn orders go through Wellborn’s dealer network, and we confirm your line, door style, and finish code with them before the order is placed. For hardware in an existing cabinet, we source a mounting-compatible aftermarket part and check it against the original spec. KraftMaid, Cambria, and Silestone runs are sourced the same way when your plan calls for them. We don’t claim parts in stock or on a truck, so there’s no “we’ll bring it out today” promise we can’t keep.
Get a Free Estimate on Your Wellborn Addition or ADU
If you’re planning a Wellborn-equipped addition or ADU in Santa Clarita, the next step is a written scope and a real number. Call (833) 762-8116 and a live person answers, any hour. We’ll set a time to walk the property, put the Wellborn line and finish schedule in writing, and hand you a quote you can look up against the brands before you sign anything. Every eligible job gets permits pulled and inspections signed, and every price change is on paper before a nail moves. That’s the 90-Day Done Right Promise: one call brings Tom back if it isn’t right.
Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.