A Barrett company - serving Santa Clarita, CA

Wellborn Kitchen Remodeling in Santa Clarita, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Kitchen Remodeling: The Santa Clarita Owner’s Guide

Wellborn-compatible kitchen remodeling in Santa Clarita typically runs $14,000 to $45,000 installed, depending on cabinet line, door style, and whether the layout changes. We work with Wellborn cabinet products, source matching components, and handle the tear-out, fit, and finish. Most Wellborn parts we replace aren’t the cabinets themselves. They’re the small pieces that wear out first: drawer glide clips, hinges, and face-frame hardware that fail on a door you open fifty times a day. You usually find out when a drawer starts pulling crooked, a door hangs low at the bottom corner, or a soft-close glide stops catching. That’s the moment this page is for.

Construction workers installing roof trusses on a residential home addition project in Santa Clarita, CA

Call (833) 762-8116

Which Wellborn Models This Applies To

Wellborn builds across several lines, and the part that fits your cabinet depends on the series and the door style, not the brand name alone. Wellborn’s cabinetry lines include the Estate, Select, and Premier series, plus semi-custom and inset options, and drawer boxes and hinges differ between them. The label inside the cabinet door or on the back of the drawer box is the first thing to check. Wellborn typically stamps the series and a part number there, and that number is what a supplier needs. If the label’s gone, measure the drawer box opening and the hinge cup bore (commonly 35mm on Euro-style hinges) and photograph the failed piece next to a ruler. We install Wellborn-compatible parts and cabinetry, but we’re an independent contractor: Barrett & Sons Construction Santa Clarita is not affiliated with Wellborn. On the OEM-versus-aftermarket question, original Wellborn glides and hinges are worth it when the cabinet is staying put and you want the exact fit. A quality aftermarket equivalent is fine for a drawer glide that’s failed twice, as long as the mounting holes line up. We’ll tell you which one actually makes sense for your box.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Kitchen Remodeling Is Failing

  • Drawer pulls crooked or grinds when you open it. The glide clip or box rail has cracked, usually from weight over the rated load. Wellborn drawer glides are rated around 75 to 100 lbs depending on the line, and a drawer full of cast iron will find the limit.
  • Door hangs low at the bottom corner and won’t stay shut. A hinge plate has loosened or the hinge cup screw has stripped out of the particleboard. Santa Clarita’s dry summers and cooler winters work the wood and slowly loosen the screw holes.
  • Soft-close stops working and the door slams. The hydraulic damper inside the hinge has worn out. It’s the single most common Wellborn hinge failure we see, and it’s a hinge swap, not a cabinet rebuild.
  • Drawer box separates at the corner. The dovetail or stapled joint has worked loose from repeated load. Once the box is wracked, the glide can’t track straight no matter how you adjust it.
  • Face frame or shelf sags under weight. A shelf pin or support has pulled, common on older boxes loaded past spec. Left alone, the cabinet frame itself starts to bow.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Wellborn-compatible kitchen work runs in Santa Clarita, parts and labor together:

Job Installed range
Full kitchen remodel (Wellborn cabinetry) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

The range depends on door style, cabinet line, box count, and whether we’re matching an existing layout or reconfiguring. We quote the part and the labor in writing, so you see the split before anything starts. Any scope change arrives as a written change order first. Every completed job is backed by our 90-Day Done Right Promise, and if a fit or finish is off, one call brings us back.

DIY or Call Us?

You can safely check a drawer glide or hinge yourself. Open the drawer, look for the cracked clip or the loose screw, and note the part number on the label. That’s the easy part. Where DIY goes wrong on kitchen cabinetry is the load path and the fit: a replacement glide with mismatched mounting holes strips the box, and a hinge swapped onto a door that’s already out of square just moves the problem. A drawer box that’s splitting needs the joint re-secured, not a new glide. None of this is dangerous the way a garage spring is, but a wrong fit means you own a cabinet that won’t close right. Call (833) 762-8116 and we’ll sort out what’s actually failed.

FAQs

How long should Wellborn cabinet glides and hinges last? A quality glide or hinge typically runs 10 to 15 years of daily use, less on a drawer that’s overloaded. Soft-close dampers usually go first, often by year 8.

Can the part be repaired instead of replaced? Yes, often. A loose hinge screw can be filled and re-driven, and a single worn hinge can be swapped without touching the others. If the drawer box joint has failed, replacement is the honest answer.

How long does the swap take? A hinge or glide replacement is usually a same-visit job, a matter of hours depending on how many pieces are involved. A full cabinet or door replacement runs longer.

How do you source the Wellborn part? We read the label or part number first, then match the series and door style before ordering. If the label’s missing, we measure and photograph the failed piece. Call (833) 762-8116 for a free estimate.

We also work with KraftMaid, Cambria, and Silestone when a kitchen needs a full set of cabinets and counters rather than one replacement. Barrett & Sons Construction Santa Clarita is owner-operated, every eligible job gets its permits pulled and inspections signed, and you can verify the license before you sign anything. Call (833) 762-8116 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Santa Clarita, serving Santa Clarita and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 762-8116
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Barrett & Sons Construction Santa Clarita responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch