Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Glendale, CA | Barrett & Sons Construction Santa Clarita
We provide independent PGT service across Glendale, and the one thing that makes our work here different is this: Glendale reviews window and door schedules against its own seismic and hillside standards, separate from LA County, so anchoring detail and permit order get decided before a single unit is ordered. Glendale is not one construction market. It is two. Steep graded pads and retaining walls up in the Verdugo foothills, dense pre-war bungalow infill on flat lots down by Brand. That split shapes every PGT job we touch. Call (833) 762-8116 to schedule a free estimate.

Why Glendale Residents Choose Us for PGT Service
Barrett & Sons Construction is owner-operated, founded in 1998, and Tom Barrett’s sons run the crews. That matters when a PGT install goes sideways, because the person who quoted your job shows up again if something’s wrong. It’s not a call center three states away.
We know the PGT lines. WinGuard aluminum impact windows and doors, WinGuard vinyl, the Aluminum Series sliding glass doors, the Vinyl Series single-hung and casement windows. When a sash binds or a glass unit fogs, we know whether an OEM part is still in production or whether the profile is discontinued and needs a quality aftermarket match that keeps the impact rating intact.
We also know Glendale. The 1920s-40s Spanish Colonial and Craftsman bungalows near downtown in 91201-91206 with their piecemeal additions. The 1950s-70s ranch and custom hillside homes on graded pads in 91207 and 91208. Different stock, different failures, different anchoring. Our crews have up to 28 years of experience, and every eligible job includes permits pulled and inspections signed. The permit inspector works for you, not for us, and that’s how we like it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in Glendale
- Vinyl-frame WinGuard warping on foothill exposures. Up in 91207 and 91208, Santa Ana wind-driven debris plus years of sun-aging warp vinyl frames until sashes bind and no longer latch cleanly. A door that used to seal tight starts letting air through, and no amount of adjusting fixes a frame that’s moved.
- Fogged insulated glass units in aluminum WinGuard sliders. When the seal between the panes breaches, you get hazing and lost impact-rating documentation. That’s a problem if you ever sell, because a Glendale buyer’s inspector will look for the rating paperwork.
- Aged weatherstripping, sweeps, and weep-hole drainage. Winter rain here comes in short, hard bursts. Degraded weatherstrip and clogged weep holes let that water sit at the sill plate, and dry-rot starts quietly under a door that looked fine in August.
- Moving hillside walls pulling openings out of square. Plenty of older PGT units were set into foothill walls that have since shifted. The result is cracked glazing, split frame corners, and hard-to-shut doors.
- Termite and dry-rot damage on older wood-framed homes. Flat-lot bungalows with piecemeal additions often hide rot at the framing around windows long before it shows inside.
PGT Service in Glendale: What Local Conditions Mean for Your Equipment
Here’s the detail that changes how a PGT job runs in Glendale and wouldn’t be equally true one town over: Glendale enforces its own building and seismic requirements, separate from LA County. On foothill homes that means your window and door schedule gets reviewed against local seismic and hillside standards, not just county or state code. That review reaches into real stuff like the anchoring detail at the sill and how the permit sequence gets stacked. On a graded-pad ranch home in the Verdugo foothills, a PGT WinGuard aluminum slider that once sealed cleanly starts sticking and leaking at the sill after a wet winter and a Santa Ana season. The usual cause is a wall that shifted slightly and pulled the opening out of square while the door’s weatherstrip and weep drainage aged out. A qualified local installer verifies the opening and anchors first, then decides whether a re-shim plus OEM weatherstrip and sweep repair restores the seal, or whether the frame and glass have to be replaced to keep the impact rating intact under Glendale’s local review.
PGT Models & Products We Service in Glendale
We work on PGT WinGuard aluminum impact windows and doors, WinGuard vinyl impact windows, the Aluminum Series sliding glass doors, and the Vinyl Series single-hung and casement windows. Where a series is still supported, we source PGT OEM sash, glass, weatherstrip, and hardware. Where a profile is discontinued, we match to quality aftermarket glazing and hardware that preserves the impact rating instead of dropping in a lesser pane to save a few hundred dollars. Parts are ordered per job against the unit’s actual series and vintage; we don’t claim a local parts stash. As an independent provider we source PGT product and verify frame and glazing condition, without any manufacturer authorization or warranty endorsement. Here’s the broader picture of how we approach PGT service across the region.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Glendale
Most PGT work here falls into three buckets. Repair, like OEM weatherstrip and sweep replacement or re-shimming an out-of-square unit, runs a fraction of a full replacement. Full window replacement and impact window installation are the big-ticket items, and hillside anchoring and seismic review push jobs toward the upper end. Home additions that include PGT units are priced as part of the larger scope.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
A free estimate includes a look at the actual openings, the anchoring, and the permit path. You get a written line-item quote, and any change in scope arrives as a written change order before work moves. No surprise invoices at the end. Call (833) 762-8116 for an exact quote. Estimates are free.

Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Glendale
No. We’re an independent provider, not a PGT dealer, and we’re not manufacturer-affiliated or authorized. We source PGT product, verify glazing and frame condition, and sequence installs against Glendale’s permitting and seismic requirements. Any manufacturer warranty questions go to PGT directly. Call (833) 762-8116 with your unit’s series and we’ll tell you what we can do.
Usually because the hillside wall has moved slightly and pulled the opening out of square while the weatherstrip and weep drainage aged. Santa Ana wind seasons plus a wet winter accelerate it. A re-shim and OEM weatherstrip often restores the seal. When the frame can’t be brought back to rated condition, replacement is the honest answer. Call (833) 762-8116 and we’ll look at the opening first.
Yes. Glendale reviews window and door schedules against its own seismic and hillside standards, separate from LA County, and that affects anchoring detail and permit sequence on foothill homes. Get the anchoring wrong and an inspection fails. Call (833) 762-8116 to talk through your project before you order anything.
Usually it can be repaired. A fogged IGU means the seal between the panes breached, and the glass unit gets replaced while the frame and sash stay if they’re sound. If the frame has warped or the anchors have failed, replacement makes more sense. Call (833) 762-8116 for an exact quote.
Mostly WinGuard aluminum impact sliders and vinyl WinGuard units on the foothill homes, and a mix of Vinyl Series single-hung and casement windows on the older flat-lot stock near downtown. Series and vintage decide whether OEM parts are still available. Call (833) 762-8116 and we’ll identify yours.
Service Areas Near Glendale
We also take PGT work in Burbank and La Crescenta-Montrose just over the ridge, plus Santa Clarita, Stevenson Ranch, and Castaic. Same crews, same written scope. If you’re in the wider area, see our Glendale service area page for what we cover.
Book Your PGT Service in Glendale Today
Whether it’s a fogged WinGuard IGU, a slider that won’t latch, or a full impact window installation on a foothill home, we’ll look at it and give you a written number. Call (833) 762-8116 to schedule your free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Santa Clarita.